US$369.00 · In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23699-2009: Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 23699-2009 | English | 369 |
Add to Cart
|
3 days [Need to translate]
|
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
| Valid |
GB/T 23699-2009
|
PDF similar to GB/T 23699-2009
Basic data Standard ID | GB/T 23699-2009 (GB/T23699-2009) | Description (Translated English) | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | A25 | Classification of International Standard | 13.180 | Word Count Estimation | 16,113 | Date of Issue | 2009-05-06 | Date of Implementation | 2009-11-01 | Adopted Standard | ISO 15537-2004, MOD | Regulation (derived from) | Announcement of Newly Approved National Standards No. 6, 2009 (No. 146 overall) | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | Summary | This standard specifies the composition of the group were tested methods, anthropometric characteristics were tested groups should be representative of the target user group object to be measured. This standard applies to industrial products and designs anthropometric characteristics testing, and design of these products or direct contact with the human body, or associated with human dimensions, such as: machinery, work equipment, personal protective equipment, consumer goods, work space, building or transport equipment. This standard also applies to the human dimension related products in the security aspects of the test. This standard does not address other aspects of the task and other requirements, such as the sensing information (other than the observation target geometrical arrangement) and the use of the controller (except for their geometric arrangement). This standard is the angle from anthropometry to choose the subjects, but similar general principles can also be used to test other variables, such as bio- mechanical aspects of the test. |
GB/T 23699-2009: Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
ICS 13.180
A25
National Standards of People's Republic of China
Industrial product design and anthropometric characteristics test
Subjects selection principles
(ISO 15537.2004, MOD)
Posted 2009-05-06
2009-11-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
Introduction Ⅱ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Test Type 2
4.1 Overview 2
4.2 Preliminary Test 2
4.3 Detailed Test 2
5 test subjects 2
5.1 General Requirements and Recommendations 2
5.2 Test Procedure 2
5.3 preliminary test subjects Option 3
5.4 Details of the test subjects Option 3
5.5 Experienced or inexperienced people 3
5.6 products in the anthropometric characteristics of an acceptable standard 3
5.7 Test Procedure documentation and test results documentation 3
Appendix A (informative) elevator anthropometric characteristics of the test procedure Example 4
Annex B (informative) body size data 6
Reference 10
Foreword
This revised standard adopts ISO 15537.2004 "Design of Industrial Products and anthropometric characteristics of the test subjects selection principle" (in English).
This standard and ISO 15537.2004 as compared to the main differences are as follows.
--- Increase the informative Appendix B;
--- Table 1, Table 2 Move informative Appendix B, to table B. 3 and Table B. 4;
--- Increased 18 to 60-year-old Chinese male body size data (Table B.1) and 18-year-old to 55-year-old Chinese female human foot
Inch data (Table B.2), to adapt to China's national conditions.
The Standard Appendix A, Appendix B is an informative annex.
This standard by the National Standardization Technical Committee on Ergonomics of human and centralized.
This standard was drafted. Beijing University of Aeronautics and Astronautics, China National Institute of Standardization, Tsinghua University, the Air Force Institute of Aviation Medicine, Beijing clothing
College loaded, assembly Aeronautical Institute of Biomedical Engineering.
The main drafters of this standard. Wang Lijing, Zhang Xin, Li Zhizhong, Cheung weeks ago, so Ran Hua, Zheng Rong, Guo North Korea, Guo Fenfei.
Introduction
Investigation on industrial products and designs in consideration of the extent to ergonomic requirements, generally by using a test device record
Various changes in parameters (such as height) or a small number of parameters due to possible scenarios. For not given special test program parallel multi
Functional test and (or) product characteristics measured, usually specify one or several persons as participants used the products being tested, and in the course of or
The latter use of observation and questioning subjects.
By this method any results obtained, which are greatly dependent on the reliability of the test is the extent to which represents a different aspect
Target user group. This standard is concerned that a matching of product and design the user group anthropometric characteristics.
Design of equipment should be reasonable considering the size of the target user group body. A method for the required inspection and product design meets
It is organized by group and let them try different ways to test the product.
Appendix A provides a use of this standard example, Appendix B shows the human dimension of the data part of the Country.
Industrial product design and anthropometric characteristics test
Subjects selection principles
1 Scope
This standard specifies the method of test group was formed in anthropometric characteristics were tested shall be representative of the group object to be measured target audience.
This standard applies to the design of industrial products and anthropometric characteristics of the test, and design of these products or in direct contact with the human body, or with people
Size-related, such as. machinery, work equipment, personal protective equipment, consumer goods, work space, transportation or construction equipment.
This standard also applies to the human dimension of security-related products in the test.
Other aspects and other requirements of this standard does not involve tasks such as perception of information (except geometrical arrangement of the observed object) and a controller
(Except their geometrical arrangement).
This standard is from the perspective of anthropometry to select subjects, but generally similar principles can also be used to test other variables, such as biomechanics
Learn aspects of the test.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 5703-1999 Basic human body measurements for technological design (eqvISO 7250.1996)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
From the perspective of anthropometric point of view, for the tested product features, usage restrictions will cause the size of the target group of systemic or local.
Note 1. The key size and reach field gap, gestures, or other contact pressure may cause difficulty in use, discomfort or health risk factors.
Note 2. a test product can have more than a critical dimension, for example, the gap may be up to the domain and combinations thereof.
Example. The critical dimension may be out of the channel width, or the width and height of the combination.
3.2
Product key size of the corresponding body measurements.
Note. For example, a person may enter the channel body anthropometric key projects are those that cause the greatest constraint measurements, such as height and (or) body width, with
Depending on the shape of the body passageway.
3.3
Of the expected use of the product design or user caused by the maximum limit of the critical dimensions of the product, additional equipment and key anthropometric items
Purpose combination.
3.4
At least two width dimension (preferred Shoulder and hip width) and the thickness of two (preferred thick chest and abdomen thick) are less than 25 percentile
Who belongs to slender body, if not the 25th percentile, then use the 5th and 50th percentile of the average of the target user group.
Example. Chinese adult men Shoulder 25th percentile value is calculated. (398mm + 431mm) /2=414.5mm, Table B. 1.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23699-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23699-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 23699-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23699-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|