HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 23679-2009 English PDF

US$314.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23679-2009: Freight containers -- Mechanical seals
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 23679-2009English314 Add to Cart 3 days [Need to translate] Freight containers -- Mechanical seals Valid GB/T 23679-2009

PDF similar to GB/T 23679-2009


Standard similar to GB/T 23679-2009

GB/T 35973   GB/T 33575   GB/T 33574   GB/T 10819   GB/T 25163   GB/T 23678   

Basic data

Standard ID GB/T 23679-2009 (GB/T23679-2009)
Description (Translated English) Freight containers -- Mechanical seals
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A85
Classification of International Standard 55.180.99
Word Count Estimation 16,166
Date of Issue 2009-05-11
Date of Implementation 2009-12-20
Adopted Standard ISOPAS 17712-2006, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 6, 2009 (No. 146 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the mechanical box sealed container type, technical requirements, test methods, identification and marking box closure. It provides a protective container in international trade information sources.

GB/T 23679-2009: Freight containers -- Mechanical seals

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Freight containers. Mechanical seals ICS 55.180.99 A85 National Standards of People's Republic of China GB/T 23679-2009/ISO /PAS17712.2006 Container mechanical seal box (ISO /PAS17712.2006, IDT) Posted 2009-05-11 2009-12-20 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 mechanical seal box of claim 1 and type 5 General requirements and mark 2 6 Test Method 3 7 Test Report 8 Appendix A (normative) box seal manufacturer code of conduct 9 GB/T 23679-2009/ISO /PAS17712.2006

Foreword

This standard is identical with ISO /PAS17712.2006 "Container mechanical seal box" (in English). For ease of use, this standard made the following editorial changes. --- The term "technical disclosure in this document" to the "standard"; --- Remove the foreword disclosed technical documents; --- For the ISO /PAS17712. other international standards cited in 2006 have been adopted as the equivalent of a standard, this standard using primers China's national standards with international standards instead of the corresponding rest is not tantamount to the adoption of standard international standards, this standard Are a direct reference (see Chapter 2 of this standard); --- Removed Tables 1 to 4, footnote. Appendix A of this standard is a normative appendix. This standard by the National Standardization Technical Committee container (SAC/TC6) and focal points. This standard was drafted. Water Transport Ministry of Transport Research Institute, Shenyang Yao Fu Shi blockade Ltd. Wenzhou Hao Lion Light Industrial Products Co. Division and the like. The main drafters of this standard. Lu Cheng, of a king, Wang Ya, Zheng Wei, Yang upper mold, Kim Jing, Cui Ning, Cheng Yu. GB/T 23679-2009/ISO /PAS17712.2006 Container mechanical seal box

1 Scope

This standard specifies the mechanical box sealed container types, technical requirements, test methods, identification and marking of tank seal. It provides an International trade information source protection container.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 19001 quality management system requirements (GB/T 19001-2008, ISO 9001.2008, IDT) GB/T 27025 testing and calibration laboratories General requirements (GB/T 27025-2008, ISO /IEC 17025.2005, IDT)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Mechanical device with a specific identifiers, installed in the door or other sealed container outside for displaying the open container door or other opening Mouth trespass, ensure the safety of the container during transport. Note. Due to the different tank seal structure for intentional or unintentional broken seal or shipping container by container opening intrusive behavior. Different security seal box Different level of protection. 3.2 Composed of metal or high-strength cable. With a strong ability to resist invasion, need heavyweight piercing tool box seal. NOTE. High security box seals with high-quality cables or rods made of high-quality application tools or bolts broken jaw broken seal. Before unpacking should observe the existence of tampering Or attempt to invade signs. 3.3 Lock materials and structures have certain anti-invasion capacity, required a lightweight tool for piercing the tank seal. NOTE. Before unpacking the need to observe the lock status and whether signs of tampering or attempted invasion of existence. 3.4 Cut by hand or using simple tools such as scissors, can be easily opened by me closure. NOTE. Before unpacking should be observed for signs of tampering or attempting to invade whether exists.

4 mechanical seal box types and requirements

4.1 linear box closure A metal wire a certain length, a section line through the clamping fixture to ensure the formation of closed rings. GB/T 23679-2009/ISO /PAS17712.2006

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23679-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23679-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23679-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23679-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.