GB/T 23581: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23581-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Storage equipment for loose bulk materials - Safety specification
| Valid |
GB/T 23581-2025
|
| GB/T 23581-2009 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Storage equipment for loose bulk materials -- Safety code
| Valid |
GB/T 23581-2009
|
Basic data | Standard ID | GB/T 23581-2025 (GB/T23581-2025) | | Description (Translated English) | Storage equipment for loose bulk materials - Safety specification | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 23581-2009 | GB/T 23581-2009: Storage equipment for loose bulk materials -- Safety code---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Storage equipment for loose bulk materials. Safety code
ICS 53.080
J83
National Standards of People's Republic of China
GB/T 23581-2009/ISO 8456. 1985
Bulk materials storage facility with safety regulations
(ISO 8456. 1985, IDT)
Posted 2009-04-13
2010-01-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is equivalent to using ISO 8456. 1985 "Safety Specification for bulk materials storage facilities" (in English).
This standard is equivalent translation ISO 8456. 1985.
For ease of use, this standard made the following editorial changes.
--- "This International Standard" be replaced by "this standard";
--- Deleted international standards foreword;
--- The ISO 8456. 1985 in Chapter 1 and Chapter 2, into the "Chapter 1" and;
--- Normative references cited in the adoption of international standards is equivalent to the national standard, and re-adjust the standard order.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee Continuous mechanical handling (SAC/TC331) centralized.
This standard was drafted. Beijing Materials Handling Research Institute.
The main drafters of this standard. Liu Tao.
GB/T 23581-2009/ISO 8456. 1985
Bulk materials storage facility with safety regulations
1 Scope
This standard specifies the hoppers, silos, silos and gates and other bulk materials with special storage facility safety rules, the regulation is ISO 1819
General safety given the supplement.
This standard specifies the safety rules do not consider the use of the original equipment.
The safety rules defining vendor responsibility for continuous handling machinery itself, the structure does not include affiliated member, unless these structures built
Storing the device.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 23580 Continuous mechanical handling equipment safety regulations specific rules (GB/T 23580-2009, ISO 7149. 1982, IDT)
ISO 1819 Continuous mechanical handling equipment - General safety regulations
3 General
With bulk materials storage facility (such as hoppers, silos, silos and gates and other equipment) shall comply with the construction and use of.
a) statutory and regional general safety requirements;
b) General safety ISO 1819 prescribed;
Special safety rules c) GB/T 23580 stipulated;
d) pressure or vacuum container products are not available under the rules of the fire source environment 1);
e) special safety rules as specified in Chapter 4.
1) access to relevant national regulations.
4 special safety rules
4.1 construction process (design and manufacturing)
4.1.1 hoppers and silos
4.1.1.1 Overview
4.1.1.1.1 device structure should be able to withstand the load under normal operating conditions (weight, storage of materials, the structure on which the subsidiary and the support provided
Equipment, as well as short-term work overload), both parties to address climate and geological conditions agreed should follow static and dynamic design specifications.
Stability requirements under all loads should also be clear in the contract.
4.1.1.1.2 storage materials such as the use of vehicles transported, the supporting part of the device with a minimum distance on both sides of the outer edge of the vehicle shall comply with the following
Claim.
a) in the running direction of the vehicle is less than 300mm, fixed isolation barrier (piles, pillars, columns, building corners, etc.), its most
Small distance of 500mm;
b) For continuous fixed obstacles (walls, warehouses, docks, buildings, etc.) under the conditions and 300mm and above the pile and pillar, which
The minimum distance of 700mm.
At work or outside work area may not necessarily follow the minimum distance specified above.
GB/T 23581-2009/ISO 8456. 1985
|