Search result: GB/T 23507.1-2017
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 23507.1-2017 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Criterion for electrical equipment for oil drilling rig -- Part 1: Main motors
| Valid |
GB/T 23507.1-2017
|
| Standard ID | GB/T 23507.1-2017 (GB/T23507.1-2017) | | Description (Translated English) | Criterion for electrical equipment for oil drilling rig -- Part 1: Main motors | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 22,263 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Regulation (derived from) | National Standards Bulletin 2017 No. 32 | | Issuing agency(ies) | People's Republic of China General Administration of Quality Supervision, Inspection and Quarantine, China National Standardization Administration |
GB/T 23507.1-2017
Criterion for electrical equipment for oil drilling rig - Part 1. Main motors
ICS 75.180.10
E92
National Standards of People's Republic of China
Specification for electrical equipment for oil rigs
Part 1. Main motor
Criterionforelectricalequipmentforoildrilingrig-Part 1.Mainmotors
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 range 1
2 Normative references 1
3 Terms and definitions 2
4 models, types and basic parameters 3
5 technical requirements 4
5.1 operating conditions 4
5.2 General Requirements 5
5.3 special requirements 5
5.4 Parts and their safety requirements 5
5.5 Clearances and creepage distances 6
5.6 Temperature rise limit 6
5.7 short-term torque 7
5.8 Information Exchange 7
5.9 Characteristics test and its tolerance 7
5.10 commutation performance 9
5.11 Insulation performance 9
5.12 starting performance 10
5.13 speeding 10
5.14 Commutator radial runout 10
5.15 Noise 10
5.16 vibration 11
5.17 shaft voltage 11
5.18 speed sensor, encoder function test 11
5.19 salt spray resistance 11
6 test methods 12
6.1 General 12
6.2 AC motor test requirements 12
6.3 Test Items and Methods 12
7 Inspection rules 14
7.1 General 14
7.2 Inspection category 14
7.3 Type test 14
7.4 Routine test 14
7.5 Decision rules 14
8 factory documents 14
8.1 Documentation Requirements 14
8.2 Files equipped with 15
9 logo, packaging, transportation and storage 15
9.1 mark 15
9.2 Packaging, transportation and storage 15
References 17
Foreword
GB/T 23507 "Specification for Electrical Equipment for Oil Drilling Rig" is divided into 4 parts.
--- Part 1. Main motor;
--- Part 2. Control system;
--- Part 3. Diesel generator sets for electric drilling rigs;
--- Part 4. Auxiliary power equipment and well field circuit.
This section GB/T 23507 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96) proposed and managed.
This part of the drafting unit in the car Yongji Electric Co., Ltd., China National Petroleum Corporation Jinan Chai Power Plant, Baoji Petroleum Machinery Co., Ltd.
Division, Great Wall Electric Tianshui Electric Drive Institute Co., Ltd., China Petroleum Group Bohai Petroleum Equipment Manufacturing Co., Ltd., Sichuan Honghua
Petroleum Equipment Co., Ltd., Nanyang two machines Petroleum Equipment Group Co., Ltd..
The main drafters of this section. Yang Jianhua, Liang Lijun, Wang Ling Jin, Liu Zhigang, Qu Bin, Liu Bo, Yang Sai-ching, Zhang Guoshan,
Dai Haifeng, Wang Xinjun, Zhao Hui, Ma Jinsheng.
Specification for electrical equipment for oil rigs
Part 1. Main motor
1 Scope
GB/T 23507 provisions of this part of the oil rig electric drive main motor (hereinafter referred to as motor) model, type, basic parameters
Number, technical requirements, test methods, inspection rules, factory documents and signs, packaging, transportation and storage.
This section applies to oil rig winch, drilling pump, turntable, top drive device with AC and DC motor (including the network driven low voltage electric
Machine) design, manufacture, testing and use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 191 Packaging - Pictorial signs
Rotating electrical machinery quota and performance GB/T 755-2008
GB/T 997 rotary motor structure type, installation type and junction box location classification (IM code)
GB/T 1032 three-phase asynchronous motor test method
GB/T 1311 DC motor test methods
GB/T 1971 rotary motor line end signs and direction of rotation
GB/T 1993 rotary motor cooling method
GB/T 2423.4 Environmental testing for electric and electronic products Part 2. Test methods Test Db alternating hot and humid (12h 12h
cycle)
GB/T 2423.17 Environmental testing for electric and electronic products Part 2. Test methods Test Ka. Salt spray
GB/T 2900.25 Electrotechnical terminology rotary motor
GB/T 2900.35 Electrotechnical terminology explosive atmospheres equipment
GB/T 2900.36 Electrotechnical terminology Electric traction
Explosive atmospheres - Part 1. General requirements for equipment
GB 3836.2 Explosive atmospheres - Part 2. Equipment protected by flameproof enclosure "d"
Explosive atmospheres - Part 3. Equipment protected by increased safety type "e"
GB/T 3836.5-2017 Explosive atmospheres - Part 5. Equipment protected by positive pressure enclosure "p"
GB/T 4942.1 rotary motor overall structure of the protection level (IP code) classification
GB/T 7060 marine rotary motor basic technical requirements
Environmental technical requirements for tropical rotary electric machines GB/T 12351-2008
GB/T 12665 motor under normal conditions of use damp heat test requirements
GB/T 12668.2 speed control electrical transmission system Part 2. General requirements Low-voltage AC variable frequency electrical drive system rating
Provisions
GB/T 14711-2013 General safety requirements for small and medium sized rotating electrical machines
General technical requirements for tropical electrical products
Test code for inter - turn insulation of motor pole coil and field winding
......
|