GB/T 22823: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22823-2025 | English | RFQ |
ASK
|
3 days [Need to translate]
|
Adhesive tape base paper
| Valid |
GB/T 22823-2025
|
| GB/T 22823-2008 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Adhesive tape base paper
| Valid |
GB/T 22823-2008
|
Basic data | Standard ID | GB/T 22823-2025 (GB/T22823-2025) | | Description (Translated English) | Adhesive tape base paper | | Sector / Industry | National Standard (Recommended) | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 22823-2008 | GB/T 22823-2008: Adhesive tape base paper---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Adhesive tape base paper
ICS 85.060
Y32
National Standards of People's Republic of China
Paper tape
Posted 2008-12-30
2009-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
The standard setting in the "double-sided tape Paper" on the basis of the original light industry standard QB/T 2494-2000 on.
The standard proposed by China Light Industry Federation.
This standard by the National Standardization Technical Committee of the paper industry.
This standard was drafted. Zhejiang Hui Paper Co., Ltd. with the Chinese Pulp and Paper Research Institute, China Paper Association Professional Committee of Standardization.
The main drafters of this standard. Wang, Cui Branch Cong, Li Dafang, Shen Xiaofei, Wang Runxia, \u200b\u200bWengming Jiang.
Paper tape
1 Scope
This standard specifies the tape Paper product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage.
This standard applies to the manufacture or double-sided adhesive tape adsorption of paper.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186.
2002, MOD)
GB/T 451.1 Paper and board size and skewness assay
GB/T 451.2 Paper and paperboard quantitative determination (GB/T 451.2-2002, eqv ISO 536.1995)
GB/T 451.3 Paper and board - Determination of thickness (GB/T 451.3-2002, idt ISO 534. 1988)
GB/T 462 paper, board and pulp - Determination of water sample (GB/T 462-2008; ISO 287. 1985, MOD;
ISO 638. 1978, MOD)
GB/T 465.2 after soaking paper and board - Determination of tensile strength (GB/T 465.2-2008, ISO 3781..1983,MOD)
GB/T 7974 paper, paperboard and pulp brightness (whiteness) measured diffusion/vertical method (GB/T 7974-2002, neq ISO 2470.
1999)
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
(GB/T 2828.1-2003, ISO 2859-1.1999, IDT)
GB/T 10342 paper packaging and identification
GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187.
1990)
GB/T 12914 Paper and board - Determination of tensile strength (GB/T 12914-2008; ISO 1924-1.1992, MOD;
ISO 1924-2.1994, MOD)
3 Product Categories
Tape Paper for the web 3.1, the roll diameter of 400mm ~ 600mm, or in compliance with the provisions of the order the contract.
3.2 Paper tape width of the order shall comply with the provisions of the contract.
4. Technical Requirements
4.1 Paper tape technology indicators should meet the requirements in Table 1, any special requirements may contract manufacturing.
Table 1
Indicators Unit provisions
Quantitative g/m2
11.0 ±
0.7
12.0 ±
0.8
14.0 ±
0.8
16.0 ±
0.9
18.0 ±
0.9
20.0 ±
1.0
22.0 ±
1.1
25.0 ±
1.3
|