|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22776-2008: Tolerances and fits for timekeeping instruments -- Tolerances of plastic parts
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22776-2008 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Tolerances and fits for timekeeping instruments -- Tolerances of plastic parts
| Valid |
GB/T 22776-2008
|
PDF similar to GB/T 22776-2008
Basic data | Standard ID | GB/T 22776-2008 (GB/T22776-2008) | | Description (Translated English) | Tolerances and fits for timekeeping instruments -- Tolerances of plastic parts | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | Y11 | | Classification of International Standard | 39.040.01 | | Word Count Estimation | 12,191 | | Date of Issue | 2008-12-30 | | Date of Implementation | 2009-09-01 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.24 (Total No.137) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the timing equipment with plastic parts tolerances. This standard applies to the basic dimensions up to 500 mm smooth barrel with plastic parts and non- fit size. | GB/T 22776-2008: Tolerances and fits for timekeeping instruments -- Tolerances of plastic parts---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tolerances and fits for timekeeping instruments. Tolerances of plastic parts
ICS 39.040.01
Y11
National Standards of People's Republic of China
Timing devices with tolerance and cooperation
Plastic Tolerances
Posted 2008-12-30
2009-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is in the original light industry standard QB/T 1989-1994 "timing devices with tolerance and fit plastic parts tolerance" basis
Making.
Appendix A of this standard is an informative annex.
The standard proposed by China National Light Industry Council.
This standard by the National Standardization Technical Committee of the watch.
This standard was drafted. Shandong Compas Watch Co., Ltd., Fujian on the Run Precision Instrument Co., Ltd., Wuhan-Shing Electronics Co.,
Institute of Light Industry watch.
Drafters of this standard. according to Tian Ke, Su Fang, Sun Gang, Yu Wen Bo, Ye Min, Kim Young-sook.
From the date of implementation of this standard, the original light industry standard QB/T 1989-1994 "timing devices with tolerance and fit plastic parts tolerance"
Automatically expires.
Timing devices with tolerance and cooperation
Plastic Tolerances
1 Scope
This standard specifies the timing devices with plastic parts tolerance.
This standard applies to the basic dimensions of 500mm smooth cylindrical plastic parts cooperation and non-cooperation dimensions.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1801 limits and tolerances and mating with the choice (GB/T 1801-1999, eqv ISO 1829. 1975)
GB/T 1803 limits and with the size up to 18mm holes, shaft tolerance
3 Basic provisions
Hole 3.1 standard, the shaft tolerance zone are shown in Table 1 and Table 2.
3.2 In some special cases, in order to ensure tolerance of plastic parts, Tables 1 and 2, there is no tolerance specified may also be used
GB/T 1801 and GB/T 1803 other tolerance zone.
Limit deviation value 3.3 standard axis of the hole tolerance zone are shown in Table 3 and Table 4, none of which can be obtained from GB/T 1801 and
GB/T 1803 in the search takes.
3.4 axis adopted yardsticks recommended hole tolerance zone formed with Appendix A.
4 Conditions
Plastic parts by molding after placing a certain time at room temperature environment, generally not less than 16h, in order to eliminate due process caused
stress.
Inspection should be ± 2 ℃ temperature of 20 ℃, relative humidity of 65% ± 5% of the conditions. Deviation from this condition should make the appropriate amendments.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22776-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22776-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22776-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22776-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|