|
US$94.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22428.3-2008: Dextrose -- Determination of loss in mass on drying
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22428.3-2008 | English | 94 |
Add to Cart
|
3 days [Need to translate]
|
Dextrose -- Determination of loss in mass on drying
| Valid |
GB/T 22428.3-2008
|
PDF similar to GB/T 22428.3-2008
Basic data | Standard ID | GB/T 22428.3-2008 (GB/T22428.3-2008) | | Description (Translated English) | Dextrose -- Determination of loss in mass on drying | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | X11 | | Classification of International Standard | 67.180.20 | | Word Count Estimation | 5,524 | | Date of Issue | 2008-10-19 | | Date of Implementation | 2009-03-01 | | Older Standard (superseded by this standard) | GB/T 12101-1989 | | Adopted Standard | ISO 1741-1980, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.17 (Total No.130) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the glucose mass loss during drying method for measuring the vacuum drying method. This standard applies to anhydrous glucose and dextrose monohydrate. | GB/T 22428.3-2008: Dextrose -- Determination of loss in mass on drying---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Dextrose. Determination of loss in mass on drying
ICS 67.180.20
X11
National Standards of People's Republic of China
GB/T 22428.3-2008/ISO 1741. 1980
Replacing GB/T 12101-1989
Loss on drying measured glucose
(ISO 1741. 1980, Dextrose-Determinationoflossinmassondrying-
Vacuumovenmethod, IDT)
Posted 2008-10-19
2009-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is identical with ISO 1741. 1980 "glucose drying process of mass loss was measured vacuum drying method" (in English), which
The content and structure of ISO 1741. 1980 is consistent, only made editorial changes.
This standard replaces GB/T 12101-1989 "loss on drying glucose measurement method."
This standard and GB/T 12101-1989 compared to major changes are as follows.
--- Standard name changed to "loss on drying glucose determination";
--- Improve the standard format, according to the International System of Units standardized units;
--- Added "6 test report."
This standard is proposed and managed by China General Chamber of Commerce.
This standard was drafted. Chinese Chamber of Commerce Business Standard centers, food, Jiangnan University, China Starch Industry Association modified starch
professional committee.
The main drafters of this standard. Guzheng Biao, Hong Yan, Cheng Li, Zhangya Yuan, Jin Xiaolei.
GB/T 22428.3-2008/ISO 1741. 1980
Loss on drying measured glucose
1 Scope
This standard specifies the drying process glucose in the mass loss determined by the method of vacuum drying.
This method is suitable for anhydrous glucose and dextrose monohydrate.
Principle 2
The sample was placed in a temperature of 100 ℃, the pressure does not exceed the quality within 13500Pa vacuum oven drying losses.
3 Instrument
3.1 Analytical balance.
3.2 weighing dish. metal (does not occur under the conditions tested chemical reaction) or glass, a diameter of 50mm, with a sealing cap.
3.3 Electric vacuum oven. temperature can be constant at 100 ℃ ± 1 ℃, and with a calibrated thermometer, and an absolute pressure gauge.
Inside the oven should be heated uniformly, and the vacuum pump remains closed after a certain vacuum within a few hours, the shelf inside the oven should be conducive to heat
Pallet delivery.
3.4 vacuum pump. pressure inside the oven can be reduced to 13500Pa, or less.
3.5 drying system. the drying column filled with dry silica gel and assembled with a concentrated sulfuric acid gas scrubber connected to the composition, and in turn connected to an electric
Air inlet of the vacuum oven.
There are plenty of valid within the desiccant and a thick porous plate. 3.6 dryer.
4 procedure
4.1 Sample preparation
The sample in the sample container and mix well. If the container is too small a sample, all samples should be transferred to the appropriate pre-dried container volume
Inside, in order to mix.
Prepared dish weighing 4.2
Will open the weighing dish (3.2) and placed in the oven cover (3.3), after 100 ℃ dried 1h desiccator (3.6), the cooling
To room temperature, weighing, accurate to 0.0002g.
4.3 said sample
Weigh approximately 10g of anhydrous glucose or dextrose monohydrate 5g in weighing dish, cover cap, accurate to 0.0002g.
4.4 Determination
Will be equipped with a sample, cover cap weighing dish placed in the oven (3.3) inside, remove the lid, at 100 ℃ ± 1 ℃ drying 4h, pressure does not exceed
13500Pa. During the drying process, through the drying system (3.5) is injected slowly airflow drying oven.
After 4h, vacuum pumps are off (3.4), air dried slowly through the system into the oven until the oven to constant pressure recovery
Pressure. Remove the weighing pan cover front cover, placed in a desiccator, cooled to room temperature and weigh to the nearest 0.0002g.
Do not place more than four weighing dish in the dryer.
Parallel experiments should be carried out.
NOTE. If in the course of the experiment or the experiment, the color of raw materials significantly to yellow, the experiment should be repeated at relatively low temperatures, and described in the report.
5 Results Calculation
Mass loss during drying, the mass fraction of said formula shown in Equation (1).
GB/T 22428.3-2008/ISO 1741. 1980
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22428.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22428.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22428.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22428.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|