|
US$674.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22281.2-2011: Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22281.2-2011 | English | 674 |
Add to Cart
|
4 days [Need to translate]
|
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing
| Valid |
GB/T 22281.2-2011
|
PDF similar to GB/T 22281.2-2011
Basic data | Standard ID | GB/T 22281.2-2011 (GB/T22281.2-2011) | | Description (Translated English) | Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | N18 | | Classification of International Standard | 25.040.40 | | Word Count Estimation | 34,327 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-05-01 | | Quoted Standard | GB/T 22281.1-2008; ISO/IEC 14750-1999 | | Adopted Standard | ISO 13374-2-2008, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 22 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the open condition monitoring and diagnostics (Condition monitoring and diagnostics, CM & D) architecture required to meet the reference information model and reference processing model requirements. Software designers need information model and process model, in order to fully describe all of the data processing requirements. GB/T 22281 This part helps CM & D system interoperability. | GB/T 22281.2-2011: Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 2: Data processing
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Condition monitoring and diagnostics of machines Data processing, communication and presentation Part 2. Data processing
ICS 25.040.40
N18
National Standards of People's Republic of China
The state machine monitoring and diagnostics
Data processing, communication and expression
Part 2. Data Processing
(ISO 13374-2.2008, IDT)
Issued on. 2011-12-30
2012-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 CMD information architecture requires 1
3.1 Overview 1
3.2 semantics defined in claim 2
3.3 conceptual information model requires 2
3.4 data model requires 2
3.5 Reference Database Requirements 3
3.6 data document defined in claim 3
3.7 Compatibility Specification 3
4 CMD processing architecture requires 3
4.1 Overview 3
4.2 Data Acquisition (DA) Block 4
Operation 4.3 Data (DM) Block 5
4.4 state detection (SD) Block 6
4.5 Health Assessment (HA) Block 7
4.6 prognosis (PA) Block 8
4.7 recommendations (AG) Block 9
4.8 Configuration 10
11 4.9 External System
Data archiving 11 4.10
Technology Show 11 4.11
4.12 Information Expression 11
4.13 Compatibility Specification 11
Appendix A (informative) Compatibility Specification 14
Appendix B (Informative Appendix) UML, XML and middleware reference 19
References 27
Foreword
GB/T 22281 "state machine monitoring and diagnostic data processing, communication and expression," or have plans to release the following sections.
--- Part 1. General;
--- Part 2. Data processing;
--- Part 3. Communication requirements.
This section GB/T 22281 Part 2.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 13374-2.2008 "state machine monitoring and diagnostic data processing, communication and expression
Part 2. Data Processing "(in English).
Consistency correspondence between this part of international documents and normative references of our files are as follows.
State GB/T 22281.1-2008 machine monitoring and diagnostic data processing, communication and presentation - Part 1. General
(ISO 13374-1.2003, IDT)
This part of the technical content and composition structure and ISO 13374-2.2008 "state machine monitoring and diagnostic data processing, communication and tables
Of Part 2. Data Processing "(in English) is consistent only where needed, made a few editorial changes.
--- The "ISO 13374-2" to "GB/T 22281 Part 2 or GB/T 22281 in this section";
--- Remove the ISO 13374-2.2008 Foreword, according to China's national standard for redrafting the foreword;
--- Which has been translated into national standards with international standards in this section appears renumbered number of national standards, international standards unconverted
Reserved;
--- Increase in Appendix B Table B.1, Table B.2 and Table B.3, will B.2.2, B.3.2 and B.4.2 words were placed in the table
In for easy viewing.
This part is proposed by China Machinery Industry Federation.
This part of the automation systems and integration by the National Standardization Technical Committee (SAC/TC159) centralized.
This section is responsible for drafting unit. Beijing Machinery Industry Automation Research Institute.
Participated in the drafting of this section. Tsinghua University.
The main drafters of this section. high Xueqin, Li Xiaodong, Yang book reviews, Huang Shuangxi.
Introduction
Currently the machine condition monitoring and diagnostics (CMD) prepared by a variety of computer software systems, if not further integration work
For, it can not conveniently exchange data or to plug and play operation. It would be difficult to integrate various systems, and it is difficult for the user to mention
For a unified view of the state of the machine. GB/T 22281 Part 1 object to the first part 3 is to provide a number of open CMD
The basic requirements for software architecture, so that in the absence of dedicated hardware platform or protocol of the case, CMD information can be through a variety of soft
Package to process, transmit and display.
The state machine monitoring and diagnostics
Data processing, communication and expression
Part 2. Data Processing
1 Scope
This section GB/T 22281 details the open condition monitoring and diagnostics (Condition monitoring and diagnostics,
CMD) requires reference information model architecture and the need to comply with the reference processing model. Software designers need information model and at
Mathematical model, in order to fully describe all the data processing requirements. This section GB/T 22281 helps interoperability CMD system.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
State GB/T 22281.1-2008 machine monitoring and diagnostic data processing, communication and presentation - Part 1. General
(ISO 13374-1.2003, IDT)
ISO /IEC 14750.1999 Information technology - Open Distributed Processing - Interface Definition Language
3 CMD information architecture requirements
3.1 Overview
An information architecture describes a given system or application. All objects and their characteristics (or attributes), features data class
Type, object-relational data, reference data and documents. CMD an open information architecture specification shown in Figure 1 should be described
Five contents of each layer.
Figure 1 CMD information architecture level
|