|
US$789.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22188.3-2010: Ergonomic design of control centre -- Part 3: Control room layout
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 22188.3-2010 | English | 789 |
Add to Cart
|
6 days [Need to translate]
|
Ergonomic design of control centre -- Part 3: Control room layout
| Valid |
GB/T 22188.3-2010
|
PDF similar to GB/T 22188.3-2010
Basic data | Standard ID | GB/T 22188.3-2010 (GB/T22188.3-2010) | | Description (Translated English) | Ergonomic design of control centre -- Part 3: Control room layout | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A25 | | Classification of International Standard | 13.180 | | Word Count Estimation | 34,376 | | Date of Issue | 2011-01-14 | | Date of Implementation | 2011-07-01 | | Quoted Standard | GB/T 1251.2-2006; GB/T 5703; GB/T 10000-1988; ISO 9241-3-1992; ISO 9241-5-1998 | | Adopted Standard | ISO 11064-3-1999, MOD | | Regulation (derived from) | National Standard Approval Announcement 2011 No.2 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the control room layout ergonomic principles, including the control room layout, workstation layout, workstation using external visual display and control room maintenance requirements, advice and guidance. This section applies to all types of control centers, including the process industry, transport control centers and emergency services dispatch system. Although this section applies to non- mobile control center, but many of the principles apply equally to mobile control center, such as the control center of ships and aircraft. | GB/T 22188.3-2010: Ergonomic design of control centre -- Part 3: Control room layout---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ergonomic design of control centres Part 3. Control room layout
ICS 13.180
A25
National Standards of People's Republic of China
Ergonomic design of control centers
Part 3. Control room layout
(ISO 11064-3.1999, MOD)
Issued on. 2011-01-14
2011-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
Ergonomic design school 4 Control Center 5
Appendix A (informative) Control room layout Example 21
References 29
Foreword
GB/T 22188 "Control Center Ergonomic design" is divided into the following sections.
--- Part 1. Design principles for the control center
--- Part 2. Control room layout principles set
--- Part 3. Control room layout
--- Part 4. Layout and dimensions of workstations
--- Part 5. Monitor and Controller
--- Part 6. Environmental requirements for control room
--- Part 7. Assessment of the principle of the control center
--- Part 8. Specific applications Ergonomic requirements
This section GB/T 22188 Part 3.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses redrafted Law Amendment uses ISO 11064-3.1999 "control center Ergonomic design - Part 3. Control
The layout of the room. " The main technical differences between this part and the international standards are as follows.
--- In Chapter 2, "Normative references" added "GB/T 10000-1988 Chinese adult human dimension";
--- Removed in 4.3.3.1 "minimum of not less than 9m2";
--- Remove Appendix B "World population anthropometric data."
This part of the National Standardization Technical Committee learned Ergonomics (SAC/TC7) and focal points.
This section drafted by. China National Institute of Standardization, Air Force Institute of Aviation Medicine, Institute of Psychology, Chinese Academy of Sciences, Beijing University of Aeronautics and Astronautics
University, Lenovo (Beijing) Limited.
The main drafters of this section. to make Ran Hua, Zhang Xin, Guo North Korea, Fu Xiaolan, detail weeks ago, Liutai Jie, Chen Bohong, Wang Lijing, Zhaozhao Yi, Xiao Hui.
Introduction
This section GB/T 22188 gives the layout of the control room ergonomics requirements, recommendations and guidelines.
User demand is the central theme of this section, at all stages of the design process must take into account the needs of users. Processing user needs entire
Policy body has been described in detail in GB/T 22188.1.
This section gives guidance control room design and planning. Workstations, monitors and controls the work environment and physical design requirements
In ISO 11064-4 to ISO 11064-6 in both elaborate. ISO 11064-7 describes the assessment principles Control Center.
ISO 11064-1 to ISO 11064-7 applies to the control area covers Ergonomic design basic principles. The ISO 11064-8
It is given for special application areas or specific requirements. Requirements specified in ISO 11064-8 and ISO 11064-1 need to
ISO 11064-7 used together.
The main beneficiaries of this section is the control room of the operator or other user. These users demand for international standard setters to mention
Control room design for ergonomic requirements. While end users may not be reading this standard, we do not even know the existence of the standard, but should
The application of this standard user interface easier to use and more consistent with the operating requirements of the work environment, in order to develop to the greatest
Extent reduce errors and improve the efficiency of design.
Design size formula given in this section from the practice, may be appropriate user population data into the calculation. Anthropometric data, see table
GB/T 10000-1988.
Ergonomic design of control centers
Part 3. Control room layout
1 Scope
GB/T 22188 in this part of the ergonomic principles given in the control room layout, including the control room layout, workstation layout, work
Outside the station and control room visual display using maintenance requirements, recommendations and guidelines.
This section applies to all types of control center, including control centers in the process industry, transportation and emergency services dispatch system. although
However, this part applies to non-mobile control centers, but many of the principles apply equally to mobile control center, such as ships and aircraft
The control center on.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 1251.2-2006 Ergonomics - Visual danger signals - General requirements, design and testing (ISO 11428.1996,
IDT)
GB/T 5703 for the technical design of the Basic human body measurements (GB/T 5703-2010, ISO 7250-1.2008, MOD)
GB/T 10000-1988 Chinese adult body size
ISO 9241-3.1992 using a visual display terminal display terminals (VDTs) Ergonomic requirements for office - Part 3. Visual
Display requirements
ISO 9241-5.1998 using a visual display terminal display terminals (VDTs) Ergonomic requirements for office Part 5. Work
Table layout and postural requirements
3 Terms and Definitions
GB/T 5703 and as defined in the following terms and definitions apply to this document.
NOTE. This chapter includes two explanatory diagram (Figure 1 and Figure 2), to help understand these definitions.
3.1
Control Center controlcentre
Functionally related and in the same location of the control room, control room, and a combination of sets of local control station (see Figure 1).
3.2
Console controlconsole
Framework for structural support apparatus, Face and storage space, the composition of the control console workstation.
3.3
Control Panel controlpanel
The board is equipped with a separate display and control groups. The control panel can be mounted on the control workstation or wall (see Figure 2).
3.4
Control Room controlroom
Functional entities and their associated physical structure of the core, the operator here to exercise centralized control, monitoring and management responsibilities.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22188.3-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 22188.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 22188.3-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22188.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|