|
US$239.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21140-2017: Non-structural finger jointed lumber
Status: Valid GB/T 21140: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 21140-2017 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Non-structural finger jointed lumber
| Valid |
GB/T 21140-2017
|
| GB/T 21140-2007 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Finger-jointed lumber -- Non-structural
| Obsolete |
GB/T 21140-2007
|
PDF similar to GB/T 21140-2017
Basic data | Standard ID | GB/T 21140-2017 (GB/T21140-2017) | | Description (Translated English) | Non-structural finger jointed lumber | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | B69 | | Classification of International Standard | 79.080 | | Word Count Estimation | 12,132 | | Date of Issue | 2017-11-01 | | Date of Implementation | 2018-05-01 | | Older Standard (superseded by this standard) | GB/T 21140-2007 | | Regulation (derived from) | National Standard Announcement 2017 No. 29 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 21140-2017: Non-structural finger jointed lumber---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Non-structural finger jointed lumber
ICS 79.080
B69
National Standards of People's Republic of China
Replacing GB/T 21140-2007
Non-structural finger-joined material
Posted.2017-11-01
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is GB/T 21140-2007 "Finger-jointed non-structural" amendment.
This standard compared with GB/T 21140-2007, the main technical changes as follows.
--- Modify the standard name (see cover);
--- Modify and delete some terms and definitions (see Chapter 3);
--- Modify the classification (see 4.1);
--- refers to the mortise and tenon structure Appendix A (see Appendix A);
--- Remove the finger tenon size series (original Chapter 6);
--- Modify the finger-joined materials (see 6.1);
--- Increased size, deviation and warpage (see 6.3);
--- Modify the appearance of quality (see 6.4);
--- Modify the bending strength index (see 6.5);
--- Increased formaldehyde emission indicators (see 6.5);
--- Modify the bending strength calculation method (see 7.3.4).
This standard proposed by the State Forestry Administration.
This standard by the National Panel Standardization Technical Committee (SAC/TC198) centralized.
This standard was drafted unit. Heilongjiang Institute of Timber Science and Technology, Heilongjiang Provincial Forest Industry Administration, Germany and China Bunny decorative new material shares
Co., Ltd., Pu'er City Quality and Technical Supervision Comprehensive Testing Center, Zhejiang Shenghua Yunfeng New Material Co., Ltd., Yiyang City, product quality supervision
Inspection Institute.
The main drafters of this standard.Wang Hongdi, Sun Liren, Bi Kexin, Mao Lei, Bai Xue, Zhao Simiao, Li Chenqi, Zhou Zhifang, Chen Linmei, Baiyunqi,
Yang Yong, Shen Jian, Tang Yuanming, Lu Rongjin, Song Yanchun.
This standard replaces the standards previously issued as.
--- GB/T 21140-2007.
Non-structural finger-joined material
1 Scope
This standard specifies the terms and definitions, classification, requirements, test methods, inspection rules and signs, non-structural finger-joinedders, packaging, transport and
Storage.
This standard applies to the definition of non-structural 3.1 with finger-joined material.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Determination of moisture content of wood GB/T 1931-2009
GB/T 2828.1-2012 Sampling procedures for inspection - Part 1 - Batch-by-lot inspection by acceptance quality limit (AQL)
plan
Testing methods of physical and chemical properties of wood - based panels and veneer wood - based panels
GB 18580 interior decoration materials and panels of formaldehyde emission limit
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
The wood or square timber along the length of the direction, the finger-bonded long, for furniture, decoration and other non-load-bearing materials.
3.2
Finger mortise fingertenon
Machining of the formed finger tenon at the end of the wood using a cutting method.
4 categories
4.1 by water resistance points.
a) Class I weather resistant non-structural finger-joined material;
b) Class II moisture-resistant non-structural finger-joined material;
c) Type III non-wetting wet non-structural finger-joined material.
4.2 Press the tenon visible material surface points.
a) horizontal type (H type) see Figure 1;
b) vertical type (V type) See Figure 2.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21140-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 21140-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 21140-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21140-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 21140-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 21140-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|