|
US$759.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20659-2017: Petroleum and natural gas industries -- Aluminium alloy drill pipe
Status: Valid GB/T 20659: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20659-2017 | English | 759 |
Add to Cart
|
6 days [Need to translate]
|
Petroleum and natural gas industries -- Aluminium alloy drill pipe
| Valid |
GB/T 20659-2017
|
| GB/T 20659-2006 | English | RFQ |
ASK
|
4 days [Need to translate]
|
Petroleum and natural gas industries -- Aluminium alloy drill pipe
| Obsolete |
GB/T 20659-2006
|
PDF similar to GB/T 20659-2017
Basic data | Standard ID | GB/T 20659-2017 (GB/T20659-2017) | | Description (Translated English) | Petroleum and natural gas industries -- Aluminium alloy drill pipe | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10; 77.150.10 | | Word Count Estimation | 38,398 | | Date of Issue | 2017-10-14 | | Date of Implementation | 2018-05-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 20659-2017: Petroleum and natural gas industries -- Aluminium alloy drill pipe---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Petroleum and natural gas industries - Aluminum alloy drill pipe
ICS 75.180.10; 77.150.10
E92
National Standards of People's Republic of China
Replacing GB/T 20659-2006
Oil and gas industry aluminum alloy drill pipe
(ISO 15546.2011, MOD)
2017-10-14 Published
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Consistency 1
3 Normative references 1
4 Terms, definitions and symbols 2
4.1 Terms and definitions 2
4.2 symbol 3
5 buyers need to provide information 5
5.1 Basic Information 5
5.2 Optional Information 5
6 manufacturing process and delivery conditions 5
6.1 General 5
6.2 heat treatment 5
6.3 Traceability 6
6.4 Delivery Conditions 6
7 material requirements 6
7.1 Material Group 6
7.2 Metallographic examination 7
7.3 Chemical Composition 7
7.4 Steel drill pipe joints 7
8 tube structure and size 7
8.1 Structure 7
8.2 length 7
8.3 Body and connector size 7
8.4 Design Weight 8
8.5 thickened transition zone 20
8.6 straightness 20
8.7 Ovality and eccentricity of the tube 20
8.8 Path requirements 20
8.9 drill pipe joints straightness 20
8.10 inner coating 21
8.11 aluminum alloy drill pipe body and joint assembly 21
9 Test methods 22
9.1 General Provisions 22
9.2 Chemical Composition Tests 22
9.3 Mechanical properties test 22
9.4 hydrostatic test 22
9.5 Corrosion test 23
Measurement methods 23
10.1 General 23
10.2 Measurement equipment calibration 24
11 test 24
11.1 General 24
11.2 Level of non-destructive testing 24
11.3 Joint non-destructive testing 24
12 mark 24
12.1 General 24
12.2 Marking order 24
12.3 Tube marking 24
12.4 Connector markings 25
12.5 drill pipe traceability mark 25
12.6 Spray Marking 25
13 Packaging, transport and storage 25
14 document 26
14.1 Certificate 26
14.2 Record keeping 26
Delivery conditions
Appendix A (Normative) Figure and Table 27 of the American Standard System of Units
Appendix B (normative) purchaser inspection 29
Appendix C (Normative) Supplementary requirements --- fatigue test procedures and fatigue data analysis
Appendix D (Normative) Corrosion test 32
Appendix E (Informative) Conversion of the International System of Units and the United States' Standard System of Units
References 34
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 20659-2006 "oil and gas industry aluminum alloy drill pipe," compared with GB/T 20659-2006, the main
The technical changes are as follows.
--- Added some terms and definitions, and modified part of the symbol and its meaning;
--- Increased and modified part of the tube size and structure;
--- Increasing the chemical composition of the test methods;
--- Increased the tube straightness of the specific detection methods and illustrations;
--- Modify the basic test method in Appendix B of the theoretical formula and test methods.
This standard uses the redrafted law to amend the use of ISO 15546.2011 "oil and gas industry aluminum alloy drill pipe."
This standard and ISO 15546.2011 technical differences and the reasons are as follows.
--- In the scope of the first chapter increased the applicability of the content to meet the requirements of China's standard-setting;
--- Modify the transition zone in Table 3, the length of the tolerance value of L1, so that the structure of the transition tube body is more reasonable;
--- Modify the value of the transition zone length L2 in Table 4 and the tolerance value, so that the pipe body transition zone structure is more reasonable.
Please note that some of this document may be patentable. The issuing agencies of this document do not bear the responsibility of identifying these patents.
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal point.
This standard drafting unit. CNPC Oil Pipe Engineering Technology Research Institute, China Petroleum Tarim Oilfield Company, Zibo Si Zhuang Aluminum
Limited.
The main drafters of this standard. Liu Yonggang, Feng Chun, Shi Qi, Lu Qiang, Li Xiaojun, Xu Ting.
This standard replaces the standards previously issued as.
--- GB/T 20659-2006.
Oil and gas industry aluminum alloy drill pipe
1 Scope
This standard specifies the oil and gas industry drilling and production operations with or without steel pipe joints aluminum alloy drill pipe delivery technology
Operating conditions, manufacturing processes, material requirements, shape and size, inspection and test procedures.
The standard provides a typical drill pipe structure, showing its main parameters and length (see Figure 1 to Figure 4), and provides the steel grade
The main dimensions and weight of the drill pipe.
This standard does not consider the use of drill pipe performance.
Note 1. The details of the drill pipe joint thread refer to ISO 10424-2 and ISO 27627;
Note 2 drill pipe performance with reference to ISO 20312;
Note 3. Refer to ISO 27627 for the thread connection between drill pipe body and connector.
This standard applies to oil, natural gas and other drilling engineering aluminum alloy drill pipe manufacturing and acceptance.
2 consistency
In this standard, the data is expressed in terms of both the SI system and the US customary unit system.
The data in the body of this standard are expressed in international units, which are indicated in Appendix A in the United States. This standard
, The figures in all figures are expressed in terms of the two system of units of the International System of Units and the system of customary units of the United States, the brackets after the data of the SI units
The figures are for the units of the United States' preferred unit system, except for Figure 11, which is shown in Figure A.1 in Figure 11, which is expressed in the United States system of customary units.
For a particular order item, only one unit system is required, and no data in other units is required.
Products manufactured according to the norms indicated by any of these unit systems shall be considered as equivalent and may be exchanged. Therefore, consistent with
A unit system that the standard requirements of the product must also meet the requirements expressed in another unit system.
The data expressed in the SI system uses a comma as the decimal separator and a space as the thousands separator. Use the U.S. customary chart
The data shown points as a decimal separator, spaces as a thousand separator.
Note. Appendix E gives the conversion of the US IAS to the SI system.
3 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 19830-2017 Oil and gas well casing or tubing for oil and gas pipelines (ISO 11960.2014, IDT)
ISO 6506 (all parts) Metallic material Brinell hardness test (Metalicmaterials-Brinelhardnesstest)
ISO 6892 (all parts) Tensile test of metallic materials (Metalicmaterials-Tensiletesting)
ISO 10424-2 Rotary drilling equipment for the oil and natural gas industry - Part 2 - Machining and measurement of rotary shoulder connections
(Petroleumand naturalgasindustries-Potarydrilingequipment-Part 2.Threadingandgaugingof
rotaryshoulderedthreadconnections)
ISO 10893-10 Non-destructive testing of steel tubes - Part 10 - Radial and transverse imperfections of seamless pipes and tubes (except submerged arc welding)
Automatic Peripheral Ultrasound Detection [Non-destructivetestingofsteeltubes-Part 10.Automatedfulperipheralul-
trasonictestingofseamlessandwelded (exceptsubmergedarc-welded) steeltubesforthedetectionofof
longitudinaland/ortransversimperfections]
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20659-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 20659-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20659-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20659-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 20659-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20659-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|