|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20644.1-2025: Special environmental condition - Guidance for choosing - Part 1: Metals protection
Status: Valid GB/T 20644.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 20644.1-2025 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Special environmental condition - Guidance for choosing - Part 1: Metals protection
| Valid |
GB/T 20644.1-2025
|
| GB/T 20644.1-2006 | English | 259 |
Add to Cart
|
3 days [Need to translate]
|
Special environmental condition -- Guidance for choosing -- Part 1: Metals protection
| Valid |
GB/T 20644.1-2006
|
Standard similar to GB/T 20644.1-2025 GB/T 20644.2 GB/T 51033 GB/T 50082 Basic data | Standard ID | GB/T 20644.1-2025 (GB/T20644.1-2025) | | Description (Translated English) | Special environmental condition - Guidance for choosing - Part 1: Metals protection | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A21 | | Classification of International Standard | 19.040 | | Word Count Estimation | 14,138 | | Date of Issue | 2025-08-01 | | Date of Implementation | 2026-02-01 | | Older Standard (superseded by this standard) | GB/T 20644.1-2006 | | Issuing agency(ies) | State Administration for Market Regulation, Standardization Administration of China | GB/T 20644.1-2025: Special environmental condition - Guidance for choosing - Part 1: Metals protection
---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20644.1-2025
ICS 19.040
CCSA21
National Standard of the People's Republic of China
Replaces GB/T 20644.1-2006
Selection Guidelines for Special Environmental Conditions
Part 1.Protection of metal surfaces
Part 1.Metals protection
Released on August 1, 2025
Implementation on February 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Table of Contents
Preface III
Introduction IV
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Classification of metal surface protective layers 1
5 Requirements of the use environment for the protective layer 1
6 Options for metal surface protection 1
7 Selection of evaluation items 2
8 Selection of test methods 2
Appendix A (Informative) Commonly used organic coatings in special environments 3
Appendix B (Informative) Metal Coverings in Special Environments 4
Appendix C (Informative) Inorganic coatings under special circumstances 5
Appendix D (Informative) Sensitive wavelength of coating resin 6
References 7
Table 1 Evaluation items for organic coatings, metal coatings and inorganic coatings 2
Table 2 Artificial simulation environment test items 2
Table A.1 Commonly used organic coatings in special environments 3
Table B.1 Commonly used metal coverings in special environments 4
Table C.1 Commonly used inorganic covering layers in special environments 5
Table D.1 Sensitive wavelengths of common coating resins
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is Part 1 of GB/T 20644 "Guidelines for the selection of special environmental conditions". GB/T 20644 has been published as follows
part.
--- Part 1.Protection of metal surfaces;
--- Part 2.Polymer materials.
This document replaces GB/T 20644.1-2006 "Guidelines for selection of special environmental conditions Part 1.Metal surface protection" and
Compared with GB/T 20644.1-2006, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) The content of "scope" has been changed to include special environmental conditions such as humid heat, humid heat ocean and cold (see Chapter 1,.2006
Chapter 1 of the.2011 edition);
b) Added “Terms and Definitions” (see Chapter 3);
c) The “Classification of Metal Surface Protective Layers” has been changed (see Chapter 4, Chapter 3 of the.2006 edition);
d) Deleted the “Classification of Conditions of Use” section (see Chapter 4 of the.2006 edition);
e) The content of “Requirements for protective layer in the use environment” has been changed (see Chapter 5, Chapter 5 of the.2006 edition);
f) Changed “Options for Metal Surface Protection” (see Chapter 6, Chapter 6 of the.2006 edition);
g) Changed "Selection of Evaluation Items" (see Chapter 7, Chapter 8 of the.2006 edition);
h) The content of “Choice of Test Methods” has been modified (see Chapter 8, Chapter 7 of the.2006 edition).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document is proposed and coordinated by the China Electrical Equipment Industry Association.
This document was drafted by. China Electric Power Research Institute Co., Ltd., Beijing Electrical Technology and Economic Research Institute of Machinery Industry, Shanghai
Measurement Design and Research Institute Co., Ltd., Shenzhen Metrology and Quality Inspection Institute (Group) Co., Ltd., Guangdong Power Grid Co., Ltd.
Science Research Institute, China Southern Power Grid Integrated Energy Co., Ltd., Shenzhen INVT Electric Vehicle Drive Technology Co., Ltd., Shenzhen Vocational and Technical
Shenzhen University of Science and Technology, Tsinghua University Shenzhen International Graduate School, Mingyang Smart Energy Group Co., Ltd., Weikai Testing Technology Co., Ltd., Midea Group Co., Ltd.
Co., Ltd., Shanghai Quality Supervision and Inspection Technology Research Institute, Beijing University of Science and Technology, China Special Aircraft Research Institute, General Machinery Key Core
Core Basic Components Innovation Center (Anhui) Co., Ltd., Hainan Power Grid Co., Ltd. Lingao Power Supply Bureau, State Grid Fujian Electric Power Co., Ltd. Power
Institute of Science.
The main drafters of this document are. Liu Miaoran, Zhen Hanyu, Huang Xiangsheng, Sun Xueming, Shi Yu, Lv Wangyan, Dong Jian, Gao Jun, Ji Zhuoqiao, Wang Xilin,
Zhong Benwang, Zheng Ziying, Yu Jianhong, Wang Tingting, Cheng Xuequn, He Weiping, Du Bin, Dr. Li, Xia Xiaojian, Nie Ming, Jia Zhidong, Chen Susheng, Zhang Yingbin,
Yan Kanghua and Lin Min.
The previous versions of this document and the documents it replaces are as follows.
---First published in.2006 as GB/T 20644.1-2006;
---This is the first revision.
introduction
GB/T 20644 "Guidelines for the Selection of Special Environmental Conditions" covers my country's dry heat, dry hot desert, plateau, humid hot ocean, humid heat, cold, etc.
Special environmental conditions. Currently, GB/T 20644 consists of two parts.
--- Part 1.Metal surface protection. The purpose is to give special environments such as dry heat, dry hot desert, plateau, humid hot ocean, humid heat, cold, etc.
Guidelines for the selection of metal surface protection under certain conditions.
--- Part 2.Polymer materials. The purpose is to give special environmental conditions such as dry heat, dry hot desert, plateau, humid hot ocean, humid heat, cold, etc.
Guidelines for the selection of polymer materials under certain conditions.
Selection Guidelines for Special Environmental Conditions
Part 1.Protection of metal surfaces
1 Scope
This document gives the classification of metal surface protective layers under special environmental conditions such as dry heat, dry hot desert, plateau, humid hot ocean, humid heat, cold, etc.
Type, requirements of the protective layer for the use environment, selection of metal surface protection, selection of evaluation items, selection of test methods, etc.
This document applies to organic coatings, metal coverings and inorganic coverings on metal surfaces.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 3138-2015 Terminology for surface treatment of metals and other inorganic coatings
GB/T 20625-2024 Terminology for special environmental conditions
3 Terms and Definitions
The terms and definitions defined in GB/T 20625-2024 and GB/T 3138-2015 apply to this document.
4 Classification of metal surface protective layers
Metal surface protective layers are divided into.
---Organic coating is a protective film layer formed by polymer compounds as the main film-forming substance;
---Metal coating is a coating mainly composed of metal and alloy materials formed on the metal surface by physical, chemical and other methods;
---Inorganic coating is a coating mainly composed of inorganic materials such as metal surface oxides and carbides.
5 Requirements of the operating environment for the protective layer
The requirements of the protective layer for the use environment are as follows.
---The metal surface used in dry heat and dry hot desert environment should be resistant to light aging, high temperature, good adaptability to temperature changes, and resistant to stone impact.
A good protective layer;
---The metal surface used in plateau environment should be resistant to light aging, low temperature, corrosion, good adaptability to temperature changes, and resistance to stone impact.
Good protective layer;
---Metal surfaces used in hot and humid environments and hot and humid marine environments should be equipped with a corrosion-resistant and light-resistant protective layer;
---Metal surfaces used in cold environments should be equipped with a protective layer that is resistant to low temperatures and has good adaptability to temperature changes.
6.Choice of metal surface protection
6.1 Selection of organic coatings
For commonly used organic coatings under special environmental conditions, see Appendix A.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20644.1-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 20644.1-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 20644.1-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20644.1-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 20644.1-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20644.1-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|