|
US$414.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19673.1-2013: Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions and tolerances for series 1 and 3
Status: Valid GB/T 19673.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 19673.1-2013 | English | 414 |
Add to Cart
|
3 days [Need to translate]
|
Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions and tolerances for series 1 and 3
| Valid |
GB/T 19673.1-2013
|
| GB/T 19673-2005 | English | 679 |
Add to Cart
|
3 days [Need to translate]
|
Linear motion rolling bearings -- Rolling bearings, linear motion ball, recirculating, sleeve type -- Accessories
| Obsolete |
GB/T 19673-2005
|
PDF similar to GB/T 19673.1-2013
Basic data | Standard ID | GB/T 19673.1-2013 (GB/T19673.1-2013) | | Description (Translated English) | Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions and tolerances for series 1 and 3 | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J11 | | Classification of International Standard | 21.100.20 | | Word Count Estimation | 21,271 | | Older Standard (superseded by this standard) | GB/T 19673-2005 | | Quoted Standard | GB/T 16940-2012; ISO 286-2; ISO 1132-1; ISO 1302; ISO 3754; ISO 5593; ISO 15241; ISO 24393 | | Adopted Standard | ISO 13012-1-2009; IDT | | Regulation (derived from) | National Standards Bulletin No. 19 of 2013 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies: meet GB/T 16940 Accessories for sleeve type linear ball bearings Dimensions, tolerances and other relevant dimensions. GB/T 19673 This standard applies to: Block for a series of sleeve type linear ball bearings closed without flan | GB/T 19673.1-2013: Rolling bearings -- Accessories for sleeve type linear ball bearings -- Part 1: Boundary dimensions and tolerances for series 1 and 3
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rolling bearings Accessories for sleeve type linear ball bearings Part 1... Boundary dimensions and tolerances for series 1 and 3
ICS 21.100.20
J11
National Standards of People's Republic of China
Replacing GB/T 19673-2005
Rolling sleeve type linear ball bearings Accessories
Part 1. 1,3 series Dimensions and Tolerances
Part 1. Boundarydimensionsandtolerancesforseries1and3
(ISO 13012-1.2009, IDT)
Issued on. 2013-09-18
2014-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 19673 "Rolling sleeve type linear ball bearings annex" is divided into two parts.
--- Part 1. 1,3 series dimensions and tolerances;
--- Part 2. 5 Series dimensions and tolerances.
This section GB/T 19673 Part 1.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB/T 19673-2005 "linear motion rolling bearings, sleeve type recirculating ball linear motion bearings annex", and
GB/T 19673-2005, compared the main technical changes are as follows.
--- Modify the "standard name" (see cover and first page, and the 2005 version of the cover page);
--- Modify some normative references (see Chapter 2, Section 2 of the 2005 edition);
--- Increased terms and definitions (see Chapter 3);
--- Modify some symbols (see Chapter 4, Chapter 4 of the 2005 edition);
--- Increase of some legend or footer (see FIG. 1, FIG. 2, FIG. 4, FIG. 5, FIG. 7);
--- Modify the parts of the drawing (see Figures 5 and 7, 2005 in Figs. 5, 7);
--- Increasing the size of the annex (see Table 1, Table 8, Table 10).
This section uses the translation method identical with ISO 13012-1.2009 "Part 1 of Annex Rolling sleeve type linear ball bearings.
1,3 Series Dimensions and tolerances. "
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 131-2006 Geometrical product specifications (GPS) technology products in the surface structure of the file notation (ISO 1302.
2002, IDT)
--- GB/T 1800.2-2009 Geometrical product specifications (GPS) limits and fits - Part 2. Standard tolerance grades and holes
Axis limit deviations (ISO 286-2. 1988, MOD)
--- GB/T 4199-2003 Rolling defined tolerances (ISO 1132-1.2000, MOD)
Depth measurement --- GB/T 5617-2005 steel induction hardening or flame hardening after the effective hardened layer (ISO 3754. 1976,
NEQ)
--- GB/T 6930-2002 Rolling Vocabulary (ISO 5593.1997, IDT)
--- GB/T 7811-2007 Rolling parameter symbols (ISO 15241.2001, IDT)
--- GB/T 29719-2013 Rolling Linear motion rolling bearings Vocabulary (ISO 24393.2008, MOD)
This section also made the following editorial changes.
--- Deleted international standards foreword.
This part is proposed by China Machinery Industry Federation.
This part of the National Standardization Technical Committee of Rolling (SAC/TC98) centralized.
This section is drafted. Luoyang Bearing Science & Technology Co., Ltd., Luoyang Bearing Research Institute Co., Ltd., Henan University of Science and Technology.
The main drafters of this section. Masu Qing, Song Yucong, Yingchun, Chen Tian Ju.
This part of the standard replaces the previous editions are.
--- GB/T 19673-2005.
Rolling sleeve type linear ball bearings Accessories
Part 1. 1,3 series Dimensions and Tolerances
1 Scope
GB/T 19673 provisions of this section in line with GB/T 16940 sleeve type linear ball bearings with attachment dimensions, other relevant
Dimensions and tolerances.
GB/T 19673 apply to this part.
seat---
1 series for sleeve type linear ball bearings closed without flange seat and adjustable seat without flange;
3 series for sleeve type linear ball bearings and adjustable seat flange sealing flange seat;
Block 3 series for the opening of the flange sleeve type linear ball bearings;
3 series for sleeve type linear ball bearings closed without flange seat and adjustable seat without flange;
3 series for sleeve type linear ball bearings without flange opening and the opening adjustable seat without seat flange.
Shaft support rails ---
Center for standard 3 Series sleeve type linear ball bearings high shaft support rails;
For low-Center Series 3 sleeve type linear ball bearings high shaft support rails.
Shaft support blocks ---
A flange for shaft support blocks 1 and 3 Series sleeve type linear ball bearings;
For series 1 and 3 sleeve type linear ball bearings flangeless shaft support blocks.
axis---
For series 1 and 3 sleeve type linear ball bearings solid shaft and hollow shaft.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 16940-2012 Rolling sleeve type linear ball bearings - Boundary dimensions and tolerances (ISO 10285.2007, IDT)
ISO 286-2 ISO system of limits and fits - Part 2. Standard tolerance grades and holes and shafts limit deviations (ISO systemof
limitsandfits-Part 2. Tablesofstandardtolerancegradesandlimitdeviationsforholesandshafts)
ISO 1132-1 Rolling tolerances - Part 1. Terms and definitions (Rolingbearings-Tolerances-Part 1.
Termsanddefinitions)
ISO 1302 Geometrical product specifications (GPS) technology products in the surface structure of the file notation (GeometricalProduct
Specifications (GPS) -Indicationofsurfacetextureintechnicalproductdocumentation)
Determination (Steel-Determinationofeffective ISO 3754 steel flame or induction hardening after the effective hardened layer depth
depthofhardeningafterflameorinductionhardening)
ISO 5593 Rolling vocabulary (Rolingbearings-Vocabulary)
ISO 15241 Rolling Parameter Symbol (Rolingbearings-Symbolsforquantities)
ISO 24393 Rolling Linear motion rolling bearings vocabulary (Rolingbearings-Linearmotionrolingbear-
ings-Vocabulary)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19673.1-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 19673.1-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 19673.1-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19673.1-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 19673.1-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19673.1-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|