HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 19183.2-2024 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19183.2-2024: Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
Status: Valid

GB/T 19183.2: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19183.2-2024English194 Add to Cart 3 days [Need to translate] Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions Valid GB/T 19183.2-2024
GB/T 19183.2-2003English154 Add to Cart 3 days [Need to translate] Mechanical structures for electronic equipment -- Outdoor enclosures -- Part 2: Coordination dimensions for cases and cabinets Valid GB/T 19183.2-2003

PDF similar to GB/T 19183.2-2024


Standard similar to GB/T 19183.2-2024

GB/T 30137   NB/T 10613   GB/T 20877   GB/T 45655   GB/T 19183.5   GB/T 19183.1   

Basic data

Standard ID GB/T 19183.2-2024 (GB/T19183.2-2024)
Description (Translated English) Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K05
Classification of International Standard 31.240
Word Count Estimation 10,134
Date of Issue 2024-12-31
Date of Implementation 2025-07-01
Older Standard (superseded by this standard) GB/T 19183.2-2003
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 19183.2-2024: Mechanical structures for electrical and electronic equipment - Outdoor enclosures - Part 2: Coordination dimensions


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 31.240 CCSK05 National Standard of the People's Republic of China Replaces GB/T 19183.2-2003 Mechanical structures for electrical and electronic equipment Outdoor enclosures Part 2.Coordinated dimensions Released on 2024-12-31 2025-07-01 Implementation State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III Introduction IV 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Arrangement Overview 2 5 Coordination size 2 5.1 General Requirements 2 5.2 Height 3 5.3 Width 4 5.4 Depth 4 Figure 1 Layout Overview 2 Figure 2 Outdoor enclosure coordination dimensions 3 Table 1 HE and HE1 dimensions 4 Table 2 WE and WE1 dimensions 4 Table 3 DE and DE1 dimensions 4

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document is Part 2 of GB/T 19183 "Outdoor enclosures for mechanical structures of electrical and electronic equipment". GB/T 19183 has been published. The following parts are published. --- Part 1.Design guidelines; --- Part 2.Coordination dimensions; --- Part 3.Environmental requirements, test and safety requirements. This document replaces GB/T 19183.2-2003 "Electronic equipment mechanical structure outdoor enclosures Part 2.Coordination of boxes and cabinets Compared with GB/T 19183.2-2003, in addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the "scope" from "cabinets and cabinets exposed to outdoor environments without weather protection" to "fixed in places without weather protection" "Outdoor application enclosures for specified use" (see Chapter 1, Chapter 1 of the.2003 edition); --- Change "coordinated dimensions of cabinets and enclosures" to "coordinated dimensions" (see Chapter 5, Chapter 4 of the.2003 edition); --- Changed the increase and decrease principles of the frame height, frame width and frame depth (see footnote a in Table 1, footnote Note a and footnote a in Table 3, Note 1 in Table 1, Note 1 in Table 2 and Note 1 in Table 3 of the.2003 edition); --- Changed the calculation formulas for the height, width and depth of the shape (see footnote b in Table 1, footnote b in Table 2). Footnote b and footnote b in Table 3, footnote 2 in Table 1, footnote 2 in Table 2 and footnote 2 in Table 3 in the.2003 edition). This document is equivalent to IEC 61969-2.2011 "Mechanical structures for outdoor enclosures of electronic equipment Part 2.Coordinated dimensions". A new chapter “Terms and Definitions” has been added to this document. The following minimal editorial changes were made to this document. --- In order to coordinate with the existing standards, the name of the standard is changed to "Mechanical structures for outdoor enclosures of electrical and electronic equipment Part 2.Coordination size". Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed and coordinated by the National Technical Committee for Comprehensive Standardization of Electrical and Electronic Equipment Structures (SAC/TC34). This document was drafted by. Beijing Institute of Electrical Engineering and Economics of Machinery Industry, Xiamen Yesheng Electric Co., Ltd., Jiangsu Qunling Energy Technology Co., Ltd., State Grid Nanjing Automation Co., Ltd., Hubei Jinfu Technology Co., Ltd., Beijing Sifang Relay Protection Engineering Technology Co., Ltd., Nanjing NARI Relay Protection Electric Co., Ltd., China Electronics Technology Group Corporation 36th Research Institute, ZTE Corporation, Nanyang Electric Qi Group Co., Ltd., Mojun Electric Co., Ltd., Shenzhen Ruiyang Chuangke Technology Co., Ltd., China Quality Certification Center Co., Ltd., Yunda Energy Technology Group Co., Ltd., Shengzhongyi Electric Power Technology Co., Ltd. The main drafters of this document are. Li Jianxia, Guo Yan, Ye Qinci, Huang Guanglin, Yu Chunlin, Xu Feilei, Han Zaolin, Yu Haibo, Jin Dayuan, Wang Wei, Li Zhengqing, Mu Linsen, Tang Jianqiang, Li Enlin, Wang Huiling, Wu Xiangke, Wang Gang, Liu Qiaoqian, and Pan Qi. The previous versions of this document and the documents it replaces are as follows. ---First published in.2003 as GB/T 19183.2-2003; ---This is the first revision.

Introduction

GB/T 19183 "Outdoor enclosures for mechanical structures of electrical and electronic equipment" is for outdoor electrical and electronic equipment used in places without weather protection. It is designed for electronic equipment casing and is intended to consist of three parts. --- Part 1.Design guidelines. The purpose is to provide a general specification for the requirements for enclosures used outdoors without weather protection. --- Part 2.Coordinated dimensions. The purpose is to ensure that the external dimensions of the outdoor enclosure are coordinated by specifying the internal and external dimensions of the outdoor enclosure. and consistency of internal connection dimensions. --- Part 3.Environmental requirements, tests and safety requirements. The purpose is to meet the storage, The requirements for transportation and final installation conditions establish the basic environmental performance standards for outdoor enclosures. With the continuous development of electrical and electronic equipment, outdoor enclosures are increasingly used. The size standard of "Outdoor Enclosure" only focuses on the overall coordinated size of the outdoor enclosure. Mechanical structures for electrical and electronic equipment Outdoor enclosures Part 2.Coordinated dimensions

1 Scope

This document applies to the design of enclosures for outdoor applications intended for stationary use in non-weather-protected locations as specified in IEC 61969-1. Internal and external coordinated dimensions comply with IEC 60917-2.Internal dimensions comply with IEC 60917-2-2 and IEC 60297-3-1011) Compared with IEC 60917-2, the external dimensions are enlarged to meet the design requirements of outdoor specific conditions. 1) IEC 61969-2.2011 is written as IEC 60297-3.This international standard has been replaced by IEC 60297-3-101.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. IEC 60297-3-101 Mechanical structures of electronic equipment 482.6 mm (19 in) series mechanical structure dimensions Part 3-101.Plug Note. GB/T 19520.12-2009 Electronic equipment mechanical structure 482.6mm (19in) series mechanical structure dimensions Part 3-101.Plug-in boxes and their plug-ins Parts (IEC 60297-3-101.2004, IDT) IEC 60917-2 Developing electronic equipment structures - Mechanical structure module series - Part 2.Sectional specification for 25 mm equipment structures equipmentpractice) Note. GB/T 19290.2-2003 Developing electronic equipment structure mechanical structure module series Part 2.Sectional specification 25mm equipment structure connection Coordinated dimensions (IEC 60917-2.1992, IDT) IEC 60917-2-2 Developing electronic equipment structures - Mechanical structure module series - Part 2.Sectional specification for 25 mm equipment structures Note. GB/T 19290.4-2009 Developing electronic equipment structure mechanical structure module series Part 2-2.Sectional specification 25mm equipment structure Interface coordination dimension detail specification Dimensions of subracks, chassis, backplanes, panels and plug-ins (IEC 60917-2-2.1994, IDT) Note. GB/T 19183.1-2024 Mechanical structures for outdoor enclosures of electrical and electronic equipment Part 1.Design guidelines (IEC 61969-1.2023, IDT)

3 Terms and definitions

There are no terms or definitions that require definition in this document.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19183.2-2024_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19183.2-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19183.2-2024_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19183.2-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19183.2-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19183.2-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.