HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (25 Oct 2025)

GB/T 19158-2025 English PDF

US$1399.00 · In stock
Delivery: <= 9 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19158-2025: Fully-wrapped carbon-fibre reinforced aluminum lined gas cylinders used on containers or skids for transportation or skids for fueling station of compressed hydrogen
Status: Valid

GB/T 19158: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 19158-2025English1399 Add to Cart 9 days [Need to translate] Fully-wrapped carbon-fibre reinforced aluminum lined gas cylinders used on containers or skids for transportation or skids for fueling station of compressed hydrogen Valid GB/T 19158-2025
GB 19158-2003English479 Add to Cart 3 days [Need to translate] [GB/T 19158-2003] Steel cylinders for the storage of compressed natural gas Valid GB 19158-2003

Basic data

Standard ID GB/T 19158-2025 (GB/T19158-2025)
Description (Translated English) Fully-wrapped carbon-fibre reinforced aluminum lined gas cylinders used on containers or skids for transportation or skids for fueling station of compressed hydrogen
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard J74
Classification of International Standard 23.020.30
Word Count Estimation 70,734
Date of Issue 2025-08-29
Date of Implementation 2026-03-01
Older Standard (superseded by this standard) GB/T 19158-2003
Issuing agency(ies) State Administration for Market Regulation, National Standardization Administration

GB/T 19158-2025: Fully-wrapped carbon-fibre reinforced aluminum lined gas cylinders used on containers or skids for transportation or skids for fueling station of compressed hydrogen


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT19158-2025
ICS 23.020.30 CCSJ74 National Standard of the People's Republic of China Replaces GB/T 19158-2003 Compressed hydrogen aluminum liner carbon fiber for container and station Fully wrapped gas cylinders Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued

Table of Contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms, Definitions and Symbols 2 4 Type, parameters and models 4 5 Technical Requirements 6 6 Test methods and qualification indicators 10 7 Inspection Rules 21 8 Installation and protection 26 9 Marking, packaging, transportation and storage 26 10 Product certificate and batch inspection quality certificate 27 Appendix A (Normative) Additional requirements for station gas cylinders 29 Appendix B (Normative) Performance Evaluation Method of O-rings for Gas Cylinders 34 Appendix C (Normative) Type test methods and qualification indicators for stop valves and safety pressure relief devices 37 Appendix D (Normative) Interlaminar shear test method 50 Appendix E (Normative) Fire test method for gas cylinders in bottled containers 54 Appendix F (Informative) Batch Inspection of Compressed Hydrogen Cylinders with Aluminum Liners and Fully Wrapped Carbon Fiber in Cylinder Containers (Cluster Units/Station Cylinders) Quality Certificate 60 Reference 62 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 19158-2003 "Compressed Natural Gas Cylinders for Station Use". Compared with GB/T 19158-2003, in addition to the structural adjustment, In addition to the integration and editorial changes, the main technical changes are as follows. a) The scope of application has been changed (see Chapter 1, Chapter 1 of the.2003 edition); b) The structural type, parameters and model nomenclature of gas cylinders have been changed (see Chapter 4, Chapter 4 of the.2003 edition); c) Added requirements for nominal volume, design cycle number, design life, etc. (see 5.1); d) The material requirements for gas cylinders have been changed (see 5.2, 5.1 and 5.2 of the.2003 edition); e) The design requirements for gas cylinders have been changed (see 5.3, 5.3 of the.2003 edition); f) The manufacturing requirements for gas cylinders have been changed (see 5.4, 5.4 of the.2003 edition); g) The test methods and qualification criteria have been changed (see Chapter 6, Chapter 6 and Chapter 7 of the.2003 edition); h) Changed the marking requirements for gas cylinders (see 9.1, 8.1 of the.2003 edition); i) Deleted the requirements for coating of gas cylinders (see 8.2 of the.2003 edition); j) Added requirements for electronic labels of gas cylinders (see 9.2); k) Added "Additional requirements for gas cylinders for station use" (see Appendix A); l) Added “Performance test method for gas cylinder seals” (see Appendix B); m) Added “Type test methods and qualification indicators for stop valves and safety pressure relief devices” (see Appendix C); n) Added “Interlaminar shear test method” (see Appendix D); o) Added “Fire test method for gas cylinders in bottle-type containers” (see Appendix E). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Gas Cylinders (SAC/TC31). This document was drafted by. Dalian Boiler and Pressure Vessel Inspection and Testing Institute Co., Ltd., Shijiazhuang Enric Gas Machinery Co., Ltd., Shenyang Oushidun New Material Technology Co., Ltd., State Administration for Market Regulation, Shanghai Gas Industry Association, Dalian Duda Polytechnic Safety Department Co., Ltd., Zhejiang University, China Special Equipment Testing and Research Institute, Beijing Tianhai Industrial Co., Ltd., Beijing Tianhai Hydrogen Energy Equipment Co., Ltd. Co., Ltd., Sinoma Technology (Suzhou) Co., Ltd., Faurecia Silinda Safety Technology (Shenyang) Co., Ltd., Beijing Kotech Technology Co., Ltd., China Marine Engineering Research Institute (Qingdao) and Jiangsu Guofu Hydrogen Energy Technology Equipment Co., Ltd. The main drafters of this document are. Hu Jun, Jin Xin, Wang Hongxia, Jiang Jiang, Gao Jixuan, Chang Yanyan, Zhou Weiming, Yu Jianliang, Huang Qianghua, Zhang Baoguo, Yue Zengzhu, Wang Yanhui, Yang Minggao, Yuan Zhuowei, Feng Cunjiang, Yang Shujun, Tu Shuo, Li Qinan, Zhao Liang, Zhang Guo, Ge Anquan, Song Xuesi, and Zhang Qiang. This document was first published in.2003 and this is the first revision. Compressed hydrogen aluminum liner carbon fiber for container and station Fully wrapped gas cylinders

1 Scope

This document specifies the types, parameters, models, technical requirements, and test procedures of compressed hydrogen gas cylinders with aluminum liner and carbon fiber wrapped for container and station use. Methods and qualification indicators, inspection rules, installation and protection as well as marking, packaging, transportation and storage. This document is applicable to the design and manufacture of working temperature of -40℃~85℃, and is installed in bottle containers or cluster devices and other container storage and use Refillable gas cylinders for transportation (hereinafter referred to as container transport gas cylinders) and hydrogen refueling stations, as well as refillable gas cylinders used as fixed storage containers Refillable gas cylinders (hereinafter referred to as station gas cylinders). a) Gas cylinders for bottled containers. nominal working pressure is 30MPa~52MPa, nominal volume is 150L~450L; b) Gas cylinders for clustering devices. nominal working pressure not exceeding 35 MPa, nominal volume 40L~150L, gas cylinders on clustering devices The total volume is not more than 3000L; c) Station gas cylinders. nominal working pressure not exceeding 70 MPa, nominal volume 150L~450L.

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 192 Basic profile of common thread GB/T 196 Basic dimensions of common threads GB/T 197 General thread tolerances GB/T 228.1 Tensile tests on metallic materials - Part 1.Room temperature test methods GB/T 230.1 Rockwell hardness test for metallic materials - Part 1.Test method GB/T 231.1 Metallic materials Brinell hardness test Part 1.Test method GB/T 232 Metallic materials bending test method GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber GB/T 533-2008 Determination of density of vulcanized rubber or thermoplastic rubber GB/T 1458 Test method for mechanical properties of annular specimens of filament-wound reinforced composites GB/T 1677 Determination of epoxy value of plasticizers GB/T 2941-2025 Rubber physical test methods - General procedures for specimen preparation and conditioning GB/T 3191 Aluminium and aluminium alloy extruded bars GB/T 3246.1 Microstructure test methods for wrought aluminium and aluminium alloy products Part 1.Microstructure test methods GB/T 3246.2 Microstructure test methods for wrought aluminium and aluminium alloy products Part 2.Macrostructure test methods GB/T 3362 Test method for tensile properties of carbon fiber multifilament GB/T 3452.2 O-rings for hydraulic and pneumatic applications - Part 2.Specification for appearance quality inspection GB/T 3512 Vulcanized rubber or thermoplastic rubber - Hot air accelerated aging and heat resistance tests GB/T 3634.2 Hydrogen Part 2.Pure hydrogen, high-purity hydrogen and ultrapure hydrogen GB/T 3880.1 Aluminium and aluminium alloy plates and strips for general industrial use Part 1.General requirements

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19158-2025_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19158-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 6 ~ 9 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19158-2025_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19158-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 19158-2025?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19158-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.