HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 18899-2023 English PDF

US$679.00 ยท In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18899-2023: All dielectric self-supporting optical fibre cable
Status: Valid

GB/T 18899: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 18899-2023English679 Add to Cart 6 days [Need to translate] All dielectric self-supporting optical fibre cable Valid GB/T 18899-2023
GB/T 18899-2002English1039 Add to Cart 5 days [Need to translate] All dielectric self-supporting optical fiber cable Obsolete GB/T 18899-2002

PDF similar to GB/T 18899-2023


Standard similar to GB/T 18899-2023

YD/T 2554.1   GB/T 9771.1   GB/T 20186.1   GB/T 18898.1   GB/T 18898.2   

Basic data

Standard ID GB/T 18899-2023 (GB/T18899-2023)
Description (Translated English) All dielectric self-supporting optical fibre cable
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard M33
Classification of International Standard 33.180.10
Word Count Estimation 33,337
Date of Issue 2023-05-23
Date of Implementation 2023-12-01
Older Standard (superseded by this standard) GB/T 18899-2002
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 18899-2023: All dielectric self-supporting optical fibre cable

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 33:180:10 CCSM33 National Standards of People's Republic of China Replacing GB/T 18899-2002 All-Dielectric Self-Supporting Optical Cable Released on 2023-05-23 2023-12-01 implementation State Administration for Market Regulation Released by the National Standardization Management Committee

table of contents

Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Abbreviations 3 5 Model and naming 3 6 Requirements 5 7 Test method 13 8 Inspection rules 20 9 Packaging, transportation and storage 22 Appendix A (informative) Correspondence between GB/T 9771 and IEC standards and ITU-T standards for single-mode fiber codes 24 Appendix B (Informative) Typical Structure of Optical Cable 25 Appendix C (Informative) Technical Requirements for Tracking Resistance Sheath Material 26 Appendix D (Normative) Tracking Resistance Test 27 Appendix E (Informative) ADSS Installation Guidelines 28 Reference 29

foreword

This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting: This document replaces GB/T 18899-2002 "Full Dielectric Self-supporting Optical Cable": Compared with GB/T 18899-2002, except for structural adjustment and Apart from editorial changes, the main technical changes are as follows: a) The structural type composition of ADSS has been changed (see Figure 1 in 5:2, Figure 1 in 4:2 of the:2002 edition); b) The code of the application scenario of the optical cable is added (see 5:2:3); c) The index requirements for optical fiber ribbons have been added (see 6:1:3:2); d) The requirements for the inner sheath are added, especially the requirements for the thickness of the inner sheath of optical cables with a span greater than 800m (see 6:1:11); e) Deleted multimode fiber and its index requirements (see 6:4:1, 8:1:2 of the:2002 edition); f) The requirements for fiber attenuation index after cabling are added (see 6:4:1:3); g) Changed the requirements for the breaking force index of the optical cable (see Table 5 in 6:4:3:2, Table 4 in 8:3:2 of the:2002 edition); h) Changed the classification requirements for decay temperature characteristics (see Table 7 in 6:4:4:2, Table 6 in 8:4:2 of the:2002 edition); i) The test method for combustion performance has been changed (see 6:4:4:6, 9:6:6 of the:2002 edition); j) Added requirements and test methods for outer sheath wear and loose tube bending (see 7:3:1); k) Changed the acceptance requirements for the impact test (see 7:5:5, 8:3:4 of the:2002 edition); l) Changed the acceptance requirements for repeated bending tests (see 7:5:6, 8:3:5 of the:2002 edition); m) Added the bending test under tension (see 7:5:11); n) Changed the acceptance requirements for wind-induced vibration tests (see 7:5:12, 8:3:9 of the:2002 edition); o) Changed the acceptance requirements for galloping tests (see 7:5:13, 8:3:10 of the:2002 edition); p) Changed the acceptance requirements for pulley test (see 7:5:14, 8:3:11 of the:2002 edition); q) The test standard for the creep test has been changed (see 7:5:15, 9:5:8 of the:2002 edition); r) Added the creep test under alternating tension (see 7:5:15:3); s) The test requirements and test methods for UV resistance have been changed (see 7:6:6, 8:4:9 of the:2002 edition): Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents: This document is proposed by the Ministry of Industry and Information Technology of the People's Republic of China: This document is under the jurisdiction of the National Communications Standardization Technical Committee (SAC/TC485): This document is drafted by: China Information and Communication Technology Group Co:, Ltd:, China Communications Service Consulting Design and Research Institute Co:, Ltd:, China Electric Power Division Research Institute Co:, Ltd:, Shanghai National Cable Testing Co:, Ltd:, China Academy of Information and Communications Technology, Jiangsu Zhongtian Technology Co:, Ltd:, Jiangxi Sutong Optical Information Co:, Ltd:, Jiangsu Hengtong Optoelectronics Co:, Ltd: The main drafters of this document: Liu Cheng, Qi Qingqing, Yang Hongwei, Guo Yi, Xin Peng, Yu Jing, Hou Jiyong, Liu Tai, Hu Guohua, Xie Shuhong, Zhai Qingshi, Ji Zhong, Shen Jiaming, Shi Huiping, Ni Haibin, Ma Shankui, Guo Kun: The release status of previous versions of this document and the documents it replaces are as follows: ---It was first published as GB/T 18899-2002 in:2002; --- This is the first revision: All-Dielectric Self-Supporting Optical Cable

1 Scope

This document specifies the model, designation, requirements, test methods, and inspection of all-dielectric self-supporting optical cables (ADSS optical cables, hereinafter referred to as optical cables): Regulations, packaging, transport and storage: This document is applicable to the design, development, production and testing of ADSS optical cables for communication lines used in overhead power transmission systems, and is also applicable to lightning-prone ADSS optical cables in aerial laying environments such as strips and large spans:

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document: GB/T 2423:24-2013 Environmental testing - Part 2: Test method Test Sa: Simulation of solar radiation on the ground and its test Guidelines GB/T 2951:11-2008 General test methods for insulation and sheath materials of electric and optical cables Part 11: General test methods Thickness and Dimensions Measurement - Mechanical Properties Test (IEC 60811-1-1:2001, IDT) GB/T 2952 (all parts) Cable outer sheath GB/T 6995:2-2008 Wire and Cable Identification Marking Method Part 2: Standard Colors GB/T 7424:21-2021 General Specification for Optical Cables Part 21: Basic Test Methods for Optical Cables-Mechanical Performance Test Methods GB/T 7424:22-2021 General Specification for Optical Cables Part 22: Basic Test Methods for Optical Cables-Environmental Performance Test Methods GB/T 7424:23-2021 General Specification for Optical Cables Part 23: Basic Test Methods for Optical Cables-Test Methods for Optical Cable Components GB/T 8170 Numerical rounding off rules and expression and determination of limit values GB/T 9771:1 Single-mode fiber for communication Part 1: Characteristics of non-dispersion-shifted single-mode fiber GB/T 9771:2 Single-mode optical fiber for communication Part 2: Cut-off wavelength shifted single-mode optical fiber GB/T 9771:3 Single-mode optical fiber for communication Part 3: Characteristics of non-dispersion-shifted single-mode optical fiber with extended wavelength range GB/T 9771:5 Single-mode fiber for communication Part 5: Characteristics of non-zero dispersion-shifted single-mode fiber GB/T 15065 Black polyethylene plastic for wire and cable GB/T 15972:20 Specifications for test methods for optical fibers - Part 20: Measurement methods and test procedures for dimensional parameters - Optical fiber geometry parameter GB/T 15972:22 Specifications for Test Methods of Optical Fibers Part 22: Measurement Methods and Test Procedures for Dimensional Parameters - Length GB/T 15972:40 Specifications for test methods of optical fibers - Part 40: Measurement methods and test procedures for transmission characteristics and optical characteristics - attenuation GB/T 15972:42 Optical Fiber Test Method Specifications Part 42: Measurement Methods and Test Procedures for Transmission Characteristics - Wavelength Dispersion GB/T 15972:44 Specifications for test methods of optical fibers - Part 44: Measurement methods and test procedures for transmission characteristics and optical characteristics - cut-off wavelength GB/T 15972:45 Specifications for test methods of optical fibers - Part 45: Measurement methods and test procedures for transmission characteristics - Mode field diameter GB/T 15972:48 Specifications for test methods of optical fibers - Part 48: Measurement methods and test procedures for transmission characteristics and optical characteristics - Polarization Mode Dispersion

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 18899-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 18899-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 18899-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 18899-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 18899-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18899-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.