US$159.00 · In stock Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18743.2-2022: Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 2: Test condition for pipes of various materials Status: Valid
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 18743.2-2022 | English | 159 |
Add to Cart
|
3 days [Need to translate]
|
Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 2: Test condition for pipes of various materials
| Valid |
GB/T 18743.2-2022
|
PDF similar to GB/T 18743.2-2022
Basic data Standard ID | GB/T 18743.2-2022 (GB/T18743.2-2022) | Description (Translated English) | Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 2: Test condition for pipes of various materials | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | G33 | Word Count Estimation | 7,732 | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 18743.2-2022: Thermoplastics pipes - Determination of pendulum impact strength by the Charpy method - Part 2: Test condition for pipes of various materials ---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Thermoplastics pipes -- Determination of pendulum impact strength by the Charpy method -- Part 2.Test condition for pipes of various materials
ICS 84.140.30
CCSG33
National Standards of People's Republic of China
Partially replaces GB/T 18743-2002
Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes
Part 2.Test conditions for pipes of different materials
Published on 2022-04-15
2022-11-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration
foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is part 2 of GB/T 18743 "Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes". GB/T 18743 has
The following sections have been published.
--- Part 1.General test methods;
--- Part 2.Test conditions for pipes of different materials.
This document and Part 1 of GB/T 18743 replace GB/T 18743-2002 "Simply Supported Thermoplastic Pipes for Fluid Transport"
Compared with GB/T 18743-2002, in addition to structural adjustment and editorial changes, the main technical changes are as follows.
a) Changed the scope of application (see Chapter 1, Chapter 1 of the.2002 edition);
b) terms and definitions are added (see Chapter 3);
c) Added test conditions for polyethylene (PE) pipes (see 4.1 and 4.2);
d) Added Method A, Method B and Method C (see 4.1, 4.2 and 4.3).
Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents.
This document is proposed by China National Light Industry Federation.
This document is under the jurisdiction of the National Standardization Technical Committee of Plastic Products (SAC/TC48).
This document is drafted by. Shanghai Baidie Pipe Technology Co., Ltd., Beijing Building Materials Inspection and Research Institute Co., Ltd., Yonggao Co., Ltd.
Co., Ltd., Chengde Jinjian Testing Instrument Co., Ltd., SABIC (China) R&D Co., Ltd., Guangdong Liansu Technology Industrial Co., Ltd.,
Akcome Enterprise Group (Shanghai) Co., Ltd., Zhonglan Chenguang Chengdu Testing Technology Co., Ltd., Yada Plastic Products Co., Ltd., Sinopec
Beijing Chemical Industry Co., Ltd. Beijing Research Institute of Chemical Technology, Beijing Technology and Business University, Petrochemical Research Institute of China National Petroleum Corporation, Baolu
Seven Star Pipe Industry Co., Ltd.
The main drafters of this document. Chai Gang, Li Yanjun, Huang Jian, Zhang Xiangling, Cui Shengming, Sun Xiuhui, Qiu Qiang, Zhang Yanjun, Wu Yuan, Li Yu'e,
Xu Haiyun, Xiang Aimin, Zhang Huaizhi, Xu Hongyue, Xie Jianling, Tang Hui.
The previous versions of this document and its superseded documents are as follows.
---First published in.2002 as GB/T 18743-2002;
---This is the first revision.
Introduction
GB/T 18743 "Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes" combined with the actual production and application of plastic pipe products in my country
Grass, including general test methods and test conditions for pipes of different materials.
--- Part 1.General test methods. The main contents include principles, equipment, samples, state adjustment and pretreatment, test procedures, and results
It specifies the general test method for the determination of the impact strength of simply supported beams of thermoplastic pipes.
--- Part 2.Test conditions for pipes of different materials. The main contents include the test conditions, specifying the different materials for thermoplastic pipes
Test conditions for the determination of the impact strength of simply supported beams.
Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes
Part 2.Test conditions for pipes of different materials
1 Scope
This document specifies the test conditions for the determination of the impact strength of simply supported beams of thermoplastic pipes of different materials.
This document applies to the determination of the impact strength of simply supported beams of thermoplastic pipes.
2 Normative references
The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations
documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to
this document.
GB/T 18743.1-2022 Determination of Impact Strength of Simply Supported Beams of Thermoplastic Pipes Part 1.General Test Methods
GB/T 19278-2018 General terms and definitions for thermoplastic pipes, fittings and valves
3 Terms and Definitions
Terms and definitions defined in GB/T 19278-2018 and GB/T 18743.1-2022 apply to this document.
4 Test conditions
4.1 Method A
4.1.1 The test conditions of homopolypropylene (PP-H), copolymerized polypropylene (PP-B, PP-R, PP-RCT) and polyethylene (PE) pipes are shown in Table 1.
Table 1 Test conditions of PP-H, PP-B, PP-R, PP-RCT and PE pipes
Tube size
dn/mm en/mm
Specimen Typea Impact Method
pendulum punch
hit energy
Pretreatment temperature Tc/℃
PP-H
PP-B, PP-R,
PP-RCT, PE
dn≤25
25< dn< 75
25< dn< 75
75≤dn< 160
75≤dn< 160
dn≥160
all
en≤4.2
4.2< en≤10.5
en≤4.2
4.2< en≤10.5
all
2 or 4
3 or 4
3 or 5
GB/T 18743.1-2022 Figure 1
GB/T 18743.1-2022 Figure 2
GB/T 18743.1-2022 Figure 1
GB/T 18743.1-2022 Figure 2 or Figure 3
GB/T 18743.1-2022 Figure 1 or Figure 3
GB/T 18743.1-2022 Figure 1 or Figure 3
15 23±2 0±2
Note. Method B or Method C can be used for pipes with wall thickness greater than 10.5mm.
a Meet the requirements of Table 1 in GB/T 18743.1-2022.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18743.2-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 18743.2-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18743.2-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18743.2-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|