|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 18608-2012: Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
Status: Valid GB/T 18608: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18608-2012 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
| Valid |
GB/T 18608-2012
|
| GB/T 18608-2001 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Crude iron, nickel, sodium, vanadium content by atomic absorption spectrometry
| Obsolete |
GB/T 18608-2001
|
PDF similar to GB/T 18608-2012
Basic data | Standard ID | GB/T 18608-2012 (GB/T18608-2012) | | Description (Translated English) | Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E21 | | Classification of International Standard | 75.040 | | Word Count Estimation | 12,14 | | Older Standard (superseded by this standard) | GB/T 18608-2001 | | Quoted Standard | GB/T 4756, GB/T 6682, SY/T 5317 | | Adopted Standard | ASTM D5863-2000a (2005), MOD | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of flame atomic absorption spectrometry in crude and residuum nickel, vanadium, iron, sodium content in two ways. Including the method A- acid digestion method for samples of nickel, vanadium and iron content and methods of | GB/T 18608-2012: Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS75.040
E21
National Standards of People's Republic of China
Replacing GB/T 18608-2001
Determination of crude oil and residual nickel, vanadium, iron, sodium content
Flame Atomic Absorption Spectrometry
Determinationofnickel, vanadium, iron, andsodiumincrudeoils
Issued on. 2012-12-31 2013-07-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 18608-2001 "crude iron, atomic nickel, sodium, vanadium content absorption spectrometry", and
GB/T 18608-2001 compared to the main technical changes are as follows.
--- Standard name from "Atomic crude iron, nickel, sodium, vanadium content absorption spectrometry" to "crude and residual oil in nickel, vanadium,
Iron and sodium content - Flame atomic absorption spectrometry ";
--- Modify the treatment of the sample (see 54, 2001 version 8.1.);
--- Modification method precision (see 57, Chapter 10, 2001 edition.);
--- Increasing the organic solvent assay samples of nickel, vanadium content and sodium content (see Chapter 6);
--- The sodium content determination method of modifying a method B (see Chapter 6, Chapter 8, 2001 edition);
--- The determination of vanadium content was revised to flame atomic absorption spectrometry;
--- Added "Quality Assurance and Control" (see Chapter 7);
--- Added "Test Report" (see Chapter 8);
--- Added "Notes" (see Appendix A).
This standard uses redrafted Law Amendment uses ASTMD5863-00a (2005) "measuring crude oil and residual nickel, vanadium, iron, sodium content
Given by Flame Atomic Absorption Spectrometry. "
This standard ASTMD5863-00a (2005) compared the structure have more adjustments listed in Appendix B of this standard and ASTM
D5863-00a (2005) of the reg number control list.
This standard ASTMD5863-00a (2005) and the technical differences for the following reasons.
--- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● use equivalent to international standards of GB/T 4756 instead ASTMD4057 (see 4.1);
● Modify with international standards of GB/T 6682 instead ASTMD1193 (see 5.2.4);
● equivalents adoption of international standards SY/T5317 instead ASTMD4177 (see 4.1).
This standard made the following editorial changes.
--- Removed ASTMD5863-00a (2005) of Chapter 4, "meaning and purpose";
--- Removed ASTMD5863-00a (2005) 22.2 "bias";
--- Removed ASTMD5863-00a (2005) of Chapter 23, "keyword";
--- Removed ASTMD5863-00a (2005) Information Appendix X1.
This standard by the National Standardization Technical Committee of Oil and Gas (SAC/TC355) and focal points.
This standard was drafted. Daqing Oilfield Engineering Limited, Chemical Engineering, China University of Petroleum (East China), China Lanzhou lubricating oil
Oil Research and Development Center.
The main drafters of this standard. Wei Che-ho, single Ling, Zhouya Bin, Liu Shuwen.
This standard replaces the standards previously issued as follows.
--- GB/T 18608-2001.
Determination of crude oil and residual nickel, vanadium, iron, sodium content
Flame Atomic Absorption Spectrometry
Warning. Use of this standard shall have a person experiences regular laboratory work This standard does not point out all possible security asked
Title The user's responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.
1 Scope
This standard specifies the flame atomic absorption spectrometry crude oil and residual oil are two methods of nickel, vanadium, iron, sodium content, including party
Measurement sample method of nickel, vanadium and iron content and the method of determination of the organic solvent B --- samples of nickel, vanadium and sodium-containing acid digestion method A ---
Amount. Method B is an oil-soluble metal element as a standard sample to determine the content of an oil-soluble metal element does not apply for the quantitative determination of non-oil containing
Samples insoluble particles, and therefore, the total content of the method that the metal element may be low, especially in the determination of inorganic sodium salt form
Sodium.
This standard applies to nickel, the determination of vanadium, iron and sodium content of the crude oil and Residual for different elements, precision two methods do not
With, according to the precision requirements for specific analysis to select the appropriate method.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 4756 petroleum liquids hand sampling method (GB/T 4756-1998, eqvISO 3170. 1988)
GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)
SY/T5317 petroleum liquids pipeline automatic sampling (SY/T5317-2006, ISO 3171. 1988, IDT)
Principle 3
3.1 Method A. Weigh 1g ~ 20g sample is placed in a quartz beaker with concentrated sulfuric acid to dissolve and heated to dryness at 525 ℃ for in a muffle furnace.
Divisible by burning carbon residue, and the resulting ash (inorganic residue) was dissolved in dilute nitric acid, and then evaporated to dryness, then add dilute nitric acid to dissolve and set the volume when measured
Vanadium, should be added to the test solution using masking agents nitrous oxide - acetylene flame measured vanadium, air - acetylene flame measured determination of nickel and iron
Given the resulting absorbance intensity proportional to the concentration.
3.2 Method B. the sample is diluted with an organic solvent to obtain a mass fraction of 5% or 20% of the test solution was diluted by the concentration of the test solution.
The concentration of analyte in the sample is determined when the determination of vanadium, should be added to the test solution using masking agents nitrous oxide - acetylene flame measured
Vanadium, air - acetylene flame - Determination of nickel and sodium resulting absorbance was measured intensity proportional to the concentration.
4 sampling
4.1 according to GB/T 4756 or SY/T5317 getting a representative sample.
Should be fully mixed. If the sample does not flow easily at room temperature, the sample should be heated to a fluid state, and then the sample was weighed before 4.2
Mix well.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 18608-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 18608-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 18608-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 18608-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 18608-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 18608-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|