Search result: GB/T 18453.4-2023
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 18453.4-2023 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Cranes - Maintenance manual - Part 4: Jib cranes
| Valid |
GB/T 18453.4-2023
|
| Standard ID | GB/T 18453.4-2023 (GB/T18453.4-2023) | | Description (Translated English) | Cranes -- Maintenance manual -- Part 4: Jib cranes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J80 | | Classification of International Standard | 53.020.20 | | Word Count Estimation | 17,168 | | Date of Issue | 2023-05-23 | | Date of Implementation | 2023-12-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Management Committee |
GB/T 18453:4-2023: Maintenance Manual for Cranes Part 4: Jib Cranes
ICS 53:020:20
CCSJ80
National Standards of People's Republic of China
Crane Maintenance Manual
Part 4: Jib cranes
Released on 2023-05-23
2023-12-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
Introduction IV
1 Range 1
2 Normative references 1
3 Terms and Definitions 1
4 Representation method of manual 2
5 Maintenance 2
6 Lubricating and hydraulic fluids3
7 Safety measures for maintenance work 4
Appendix A (informative) Maintenance item example 5
Reference 12
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document is part 4 of the Crane Maintenance Manual series of standards: The following parts of this series of standards have been published:
--- Part 1: General;
--- Part 4: Jib cranes:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by the Ministry of Transport of the People's Republic of China:
This document is under the jurisdiction of the National Hoisting Machinery Standardization Technical Committee (SAC/TC227):
This document was drafted by: Water Transport Research Institute of the Ministry of Transport, Tianjin Port (Group) Co:, Ltd:, Shanghai Maritime University, Yang Ge Technology Co:, Ltd:
Co:, Ltd:, Taiyuan University of Science and Technology, Shanghai Zhenhua Heavy Industry (Group) Co:, Ltd:, Wuhan Gangdi Intelligent Technology Co:, Ltd:, Shandong Luhai
Heavy Industry Co:, Ltd:, Weite Technology Co:, Ltd:, Dalian University of Technology:
The main drafters of this document: Ning Weiting, Zhang Dewen, Wang Xuan, Mei Xiao, Yang Guangping, Wen Hao, Zhou Huiqin, Zhang Tao, Chen Yanping, Liu Long, Dong Dashan,
Sun Lijie, Miao Wenfeng, Wu Qiang, Liu Yan, Teng Rumin, Wang Quanwei, Zhang Xinrui, Shi Liangzhong, Huang Wendong, Cai Xiaoyu, Zhao Wei:
introduction
Jib cranes are widely used in ports, shipyards and equipment manufacturing, hydropower construction, nuclear power construction, railways, bridges and other fields: according to
The ISO /TC96 standard system divides cranes into four categories: mobile cranes, tower cranes, jib cranes, bridge and gantry cranes:
Category, the "Crane Maintenance Manual" series standards are proposed to be composed of five parts:
--- Part 1: General: The purpose is to specify the general requirements for the presentation method and content of crane maintenance manuals:
--- Part 2: Mobile cranes: The purpose is to specify the general requirements for the expression method and content of mobile crane maintenance manuals:
--- Part 3: Tower cranes: The purpose is to specify the general requirements for the expression method and content of the tower crane maintenance manual:
--- Part 4: Jib cranes: The purpose is to specify the general requirements for the expression method and content of the jib crane maintenance manual:
--- Part 5: Bridge and gantry cranes: The purpose is to specify the expression method and content of maintenance manuals for bridge and gantry cranes
General requirements:
Crane Maintenance Manual
Part 4: Jib cranes
1 Scope
This document specifies the expression method, maintenance, lubrication and hydraulic oil, safety measures for maintenance operations, etc: of the jib crane maintenance manual
General requirements for writing:
This document applies to the preparation of maintenance manuals for jib cranes defined in GB/T 6974:4:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 18453-2001 Crane Maintenance Manual Part 1: General Rules
GB/T 31052:1-2014 Inspection and Maintenance Procedures for Lifting Machinery Part 1: General Rules
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
maintenance
A series of work performed to maintain or restore the crane to a state capable of performing its specified functions:
Note 1: Maintenance is divided into planned maintenance and unplanned maintenance:
Note 2: Maintenance work includes maintenance and repair:
[Source: GB/T 31052:1-2014, 3:5, modified]
3:2
In order to ensure the normal and safe operation of the crane, the necessary work is carried out according to the plan:
Note: Maintenance includes cleaning, lubrication, fastening, adjustment, anti-corrosion, etc:
[Source: GB/T 31052:1-2014, 3:6, modified]
3:3
repair repair
For daily or abnormal reasons that cause equipment damage and failure that affect the normal operation of the crane, repair or replace the damaged
A series of work to restore the function of the equipment:
[Source: GB/T 31052:1-2014, 3:7]
3:4
planned maintenance planned maintenance
In order to reduce the probability of crane failure or performance degradation, maintenance is carried out according to the established periodic table and corresponding specifications:
[Source: GB/T 31052:1-2014, 3:8]
......
|