US$359.00 ยท In stock Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 18263-2023: Wood-based panel machinery - Hot press for terminology Status: Valid GB/T 18263: Evolution and historical versions
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
GB/T 18263-2023 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Wood-based panel machinery - Hot press for terminology
| Valid |
GB/T 18263-2023
|
GB/T 18263-2000 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Wood-based panel machinery. Hot presses for terminology
| Obsolete |
GB/T 18263-2000
|
PDF similar to GB/T 18263-2023
Basic data Standard ID | GB/T 18263-2023 (GB/T18263-2023) | Description (Translated English) | Wood-based panel machinery - Hot press for terminology | Sector / Industry | National Standard (Recommended) | Classification of Chinese Standard | B97 | Classification of International Standard | 79.120 | Word Count Estimation | 17,126 | Date of Issue | 2023-05-23 | Date of Implementation | 2023-05-23 | Older Standard (superseded by this standard) | GB/T 18263-2000 | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration |
GB/T 18263-2023: Wood-based panel machinery - Hot press for terminology---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 79:120
CCSB97
National Standards of People's Republic of China
Replacing GB/T 18263-2000
Wood-based panel mechanical heat press terminology
Released on 2023-05-23
2023-05-23 Implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 18263-2000 "Terms of Wood-based Panel Mechanical Hot Press": Compared with GB/T 18263-2000, except for structural adjustment
In addition to rectification and editorial changes, the main technical changes are as follows:
a) Deleted the sketch (see 2:1 of the:2000 edition);
b) Deleted load (see 1:18 in Table 1 of the:2000 edition), maximum working pressure (see 1:19 in Table 1 of the:2000 edition), mass
(weight) (see 1:27 in Table 1 of the:2000 edition), overall dimensions (see 1:28 in Table 1 of the:2000 edition), sliders and guide rails (see
2:12 in Table 1 of the:2000 edition), cylinder block (see 3:1:1 in Table 1 of the:2000 edition), plunger (piston) (see Table 1 of the:2000 edition
3:1:2 in:2000 edition), dust seal (see 3:1:3 in Table 1 of:2000 edition), oil seal ring (see 3:1:4 in Table 1 of:2000 edition), column
Plug/piston guide sleeve (see 3:1:5 in Table 1 of the:2000 edition), sealing gland (see 3:1:6 in Table 1 of the:2000 edition), oil pipe connection
head (see 3:1:7 in Table 1 of the:2000 edition), rapid pressure cylinder plunger (see 3:3:1 in Table 1 of the:2000 edition), air pressure bag (see
4:2:5 in Table 1 of the:2000 edition), plates (see 4:2:7 in Table 1 of the:2000 edition), pump stations (see 4:2:7 in Table 1 of the:2000 edition
6:1), pumps (see 6:2 in Table 1 of the:2000 edition), accumulators (see 6:3 in Table 1 of the:2000 edition), pressure gauges (see 6:2 in the:2000 edition
7:1 in Table 1 of the:2000 edition), thermometers (see 7:2 in Table 1 of the:2000 edition), timers (see 7:3 in Table 1 of the:2000 edition), indicators
indicator lights (see 7:4 in Table 1 of the:2000 edition), control buttons (see 7:5 in Table 1 of the:2000 edition), manual operating levers (see
7:6 in Table 1 of the:2000 edition), control switch (see 7:7 in Table 1 of the:2000 edition), console (see 7:8 in Table 1 of the:2000 edition), safety
Full face mask (see 8:3 in Table 1 of the:2000 edition), others (see 9 in Table 1 of the:2000 edition), pressure indicator (see the table of the:2000 edition
9:1 in 1), heat sources (see 9:2:2 in Table 1 of the:2000 edition), work examples (see 11 in Table 1 of the:2000 edition), etc:
the term;
c) Delete the term of pre-pressing machine (see 1:7 in Table 1 of the:2000 edition);
d) The number of hot pressing plates (see 1:14 in Table 1 of the:2000 edition), the unit pressure of the hot pressing plates (see 1:20 in Table 1 of the:2000 edition) and
Pressed plate unit pressure (see 1:21 in Table 1 of the:2000 edition), continuous pressure holding section (see 4:2 in Table 1 of the:2000 edition), hot pressing
(see 11:1 in Table 1 of the:2000 edition), various glue-pressed veneers (see 11:2 in Table 1 of the:2000 edition), veneer veneer (see
Technical terms such as 11:3) in Table 1 of the:2000 edition;
e) Deleted the number of charging compartments (see 1:10 in Table 1 of the:2000 edition), the frame plate (see 2:1 in Table 1 of the:2000 edition), and the upper backing plate
(See 2:2 in Table 1 of the:2000 edition), heat balance plate (see 2:3 in Table 1 of the:2000 edition), upper top plate (see Table 1 of the:2000 edition
2:4 in), heat shield (see 2:5 in Table 1 in:2000 edition), cooling plate (see 2:6 in Table 1 in:2000 edition), main pressure cylinder
(see 3:2 in Table 1 of the:2000 edition), main pressure cylinder plunger (see 3:2:1 in Table 1 of the:2000 edition), rapid pressure cylinder (see
3:3 in Table 1 of the:2000 edition), rapid pressure cylinder plunger (see 3:3:1 in Table 1 of the:2000 edition), lower bracket (see:2000 edition
4:2:1) in Table 1 and other main component terms;
f) Added periodic heat press (see 3:2), vertical heat press (see 3:4), horizontal heat press (see 3:5), continuous flat heat press
(see 3:8), continuous rolling heat press (see 3:9), continuous extrusion heat press (see 3:10), veneer heat press (see 3:14), veneer
Periodic hot press (see 3:15), veneer continuous flat press (see 3:16), vacuum air cushion film coating hot press (see 3:17)
Terms and definitions of isothermal press machine;
g) Increased column (see 3:21), fixed beam (see 3:26), hot plate positioning and guiding mechanism (see 3:27), lubrication system (see
3:32), hot oil pipe (see 3:33), anti-wear lining (see 3:39), steel belt driving roller (see 3:40), steel belt driven roller (see 3:41), steel belt
Idler roller (see 3:42), roller bar (see 3:44), connecting pin (see 3:45), roller blanket transmission chain (see 3:46), chain guide rail (see 3:47), upper and lower
Steel belt driving mechanism (see 3:48), upper and lower steel belt deviation adjustment mechanism (see 3:49), upper and lower roller blanket driving mechanism (see 3:50), entrance quilt
Moving frame (see 3:51), exit driving frame (see 3:52), steel belt tension roller (see 3:53), main heating roller (see 3:54), large pressure roller (see
3:55), small pressure roller (see 3:56), steel belt deflection adjustment roller (see 3:57), sprocket roller (see 3:58), density roller (see 3:59), steel belt detection
Device (see 3:60), roller blanket detection device (see 3:61), upper beam (see 3:62), bottom beam (see 3:63), thickness gauge (see 3:64), air cushion
Membrane (see 3:65), lifting screw (see 3:67), position detection device (see 3:68), parallel synchronization mechanism (see 3:69), upper oil tank
(see 3:70), guide mechanism (see 3:71), liner tensioning device (see 3:72), heat insulation pad (see 3:73), lower fuel tank (see 3:74),
Terms of main parts such as liner (see 3:75), tension block (see 3:76), buffer pad (see 3:77), buffer pad clamp (see 3:78)
and definitions;
h) Added pressurized cylinder diameter (3:85), pressurized cylinder stroke (see 3:86), pressure division (see 3:87), heating division (see 3:88),
Heating medium (hot oil/steam/hot water) (see 3:93), thermal pressure factor (see 3:94), pressure curve (see 3:95), displacement curve (see
3:96) and other technical terms and definitions;
i) Changed the continuous heat press (see 3:3, 1:6 in Table 1 of the:2000 edition), column heat press (see 3:12, Table 1 of the:2000 edition
1:2 in the:2000 edition), lock nuts (see 3:24, 2:10 in Table 1 of the:2000 edition), movable beams (see 3:25, 2:10 in Table 1 of the:2000 edition
5), safety devices (see 3:29, 8 in Table 1 of the:2000 edition), thermal oil circulation system (see 3:31, 8 in Table 1 of the:2000 edition
9:2:1), steel belt (see 3:38, 3:6 in Table 1 of the:2000 edition), roller blanket (see 3:43, 4:3 in Table 1 of the:2000 edition), workpiece support
Clamping and guiding mechanism (see 3:66, 4 in Table 1 of the:2000 edition) and other terms and definitions:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed by the State Forestry and Grassland Administration:
This document is under the jurisdiction of the National Wood-based Panel Machinery Standardization Technical Committee (SAC/TC66):
This document is drafted by: Chinese Academy of Forestry Wood Industry Research Institute, Beijing Forestry University, Suzhou Sufuma Machinery Co:, Ltd:,
Shanghai Wood-based Panel Machinery Factory Co:, Ltd:, Suzhou Huaxiang Wood Machinery Co:, Ltd:, Yalian Machinery Co:, Ltd:, China Foma Machinery Group
Mission Ltd:
The main drafters of this document: Li Li, Li Xiaoxu, Luo Bin, Yan Chenglin, Li Shaokun, Shen Wenrong, Nan Mingshou, Xu Xiaoyu, Zhang Hongjian, Liu Dong,
Liu Zixin:
The release status of previous versions of this document and the documents it replaces are as follows:
---First published as GB/T 18263-2000 in:2000;
--- This is the first revision:
Wood-based panel mechanical heat press terminology
1 Scope
This document defines the terminology of the whole machine, main components and typical hot-pressing process of the hot-pressing machine for wood-based panel production:
This document applies to the design, manufacture, trade, teaching, scientific research and press publication of wood-based panel heat presses:
2 Normative references
This document has no normative references:
3 Terms and Definitions
3:1
Wood-based panel hot press
Using hydraulic oil as the pressurized medium, steam, heat transfer oil, water, etc: as the heating medium, pressurize and heat the wood-based panel slabs, and make the slabs glued into shape
machinery:
Note: According to the working method, wood-based panel heat presses are divided into periodic heat presses and continuous heat presses; cycle heat presses are further divided into single-layer heat presses and multi-layer heat presses
Machine, continuous heat press is divided into continuous flat heat press, continuous roll heat press and continuous extrusion heat press: According to the structural type, wood-based panels
The heat press machine is divided into a vertical heat press machine and a horizontal heat press machine:
3:2
Periodic hot press machine periodichotpress
A type of hot press that pressurizes and heats wood-based panel slabs that enter and exit periodically:
3:3
Continuous hot press continuoushotpress
A type of hot press that pressurizes and heats wood-based panel slabs that enter and exit continuously:
3:4
Vertical hot press verticalhotpress
A type of hot press machine in which the working surface of the hot press plate is parallel to the base of the hot press machine:
3:5
Horizontal hot press horizontal hot press
A type of hot press machine in which the working surface of the hot press plate is perpendicular to the base of the hot press machine:
3:6
Single-layer heat press single-openinghotpress
A heat press machine that pressurizes and heats a group of wood-based panel slabs by an upper heat press plate and a lower heat press plate:
3:7
multi-layer heat press machine multi-openinghotpress
A hot press machine that pressurizes and heats multiple groups of wood-based panel slabs by multiple hot pressing plates:
3:8
The wood-based panel slab is continuously fed by the upper and lower ring-shaped steel belts, and the roller blanket and steel belt are used as the pressurizing and heating medium to complete the wood-based panel:
|