|
US$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17894-2023: Freight containers - Automatic identification
Status: Valid GB/T 17894: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17894-2023 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Freight containers - Automatic identification
| Valid |
GB/T 17894-2023
|
| GB/T 17894-1999 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Freight containers. Automatic identification
| Obsolete |
GB/T 17894-1999
|
PDF similar to GB/T 17894-2023
Basic data | Standard ID | GB/T 17894-2023 (GB/T17894-2023) | | Description (Translated English) | Freight containers - Automatic identification | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A85 | | Classification of International Standard | 55.180.10 | | Word Count Estimation | 18,183 | | Date of Issue | 2023-03-17 | | Date of Implementation | 2023-07-01 | | Older Standard (superseded by this standard) | GB/T 17894-1999 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 17894-2023: Freight containers - Automatic identification---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS55:180:10
CCSA85
National Standards of People's Republic of China
Replacing GB/T 17894-1999
Container automatic identification
(ISO 10374:1991, MOD)
Released on 2023-03-17
2023-07-01 implementation
State Administration for Market Regulation
Released by the National Standardization Management Committee
table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Job Requirements 2
5 Electronic label data content and format 7
6 Operation Frequency and Sensitivity of Electronic Tags 8
7 interface 8
8 Tests and requirements of AEI system 8
Appendix A (Normative) Test Requirements 9
Appendix B (Normative) Technical Requirements for AEI Power Reflection System 11
Reference 13
foreword
This document is in accordance with the provisions of GB/T 1:1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents"
drafting:
This document replaces GB/T 17894-1999 "Automatic Identification of Containers": Compared with GB/T 17894-1999, except for structural adjustment and compilation
In addition to editorial changes, the main technical changes are as follows:
a) Changed the scope of the standard (see Chapter 1, Chapter 1 of the:1999 edition);
b) Deleted the terms "container", "required and optional", "physical and electronic
Accuracy" (see 3:1, 3:2, 3:3, 3:9, 3:10 of the:1999 edition);
c) The definitions of the terms "object protection", "electronic protection", "range", "passing speed" and "box dynamics" have been changed (see 3:1, 3:2, 3:3, 3:4,
3:5, 3:4, 3:5, 3:6, 3:7, 3:8 of the:1999 edition);
d) Change "code plate" and "code reader" to "electronic label" and "reader" (see Chapter 4, Chapter 5, Chapter 6, Chapter 7,:1999 edition
Chapter 4, Chapter 5, Chapter 6, Chapter 7);
e) Added requirements for electronic label data storage location (see Table 3);
f) Change the informative appendix "Technical Conditions of AEI Power Reflector System" to a normative appendix (see Appendix B, appendix of the:1999 edition
record B):
This document is modified to adopt ISO 10374:1991 "Automatic Container Identification":
The technical differences between this document and ISO 10374:1991 and their reasons are as follows:
--- Replaced ISO 6346:1984 (see 4:3) with the normatively quoted GB/T 1836-2017 to meet the technical requirements of our country;
---Increase the storage location of the electronic tag data (see Table 3), in order to improve the practicality of the electronic tag operation and facilitate the electronic tag operation:
The following editorial changes have been made to this document:
---Incorporated the amendment content of ISO 10374:1991/Amd:1:1995, the outer margin position of the terms involved is vertical
Double lines (‖) are marked;
--- Replaced ISO 668:1988 with the informative referenced GB/T 1413-2023;
--- Unified container size and mass metric units;
--- Deleted some notes of ISO 10374;
--- Added references:
Please note that some contents of this document may refer to patents: The issuing agency of this document assumes no responsibility for identifying patents:
This document is proposed and managed by the National Container Standardization Technical Committee (SAC/TC6):
This document is drafted by: Institute of Water Transport Science, Ministry of Transport, Shenzhen CIMC Intelligent Technology Co:, Ltd:, Minmetals Logistics Group Tianjin Cargo Co:, Ltd:
Transport Co:, Ltd:, China Railway Container Transport Co:, Ltd:, and China Railway Tielong Container Logistics Co:, Ltd:
The main drafters of this document: Wang Jing, Zhou Shouqin, Li Wenhui, Liu Jianping, Xu Shibo, Sun Tao, Li Jichun, Zhao Jieting:
This document was first published in:1999, and this is the first revision:
Container automatic identification
1 Scope
This document specifies the operation requirements for container automatic identification, electronic label data content and format, electronic label operation frequency and sensitivity:
Degree, interface requirements, and tests and requirements of the AEI system:
This document applies to containers defined in GB/T 1413-2023:
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text: Among them, dated references
For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
this document:
GB/T 1836-2017 Container code, identification and marking (ISO 6346:1995, IDT)
3 Terms and Definitions
The following terms and definitions apply to this document:
3:1
physical protection physicalytamper-proof
Designed to be visually inspectable to prevent deliberate disassembly and reassembly using conventional tools:
3:2
Electronic protection electronicalytamper-proof
Security measures designed to prevent the deliberate use of electromagnetic effects to alter information stored in electronic devices:
3:3
range range
The effective reading and writing distance between the electronic tag and the reader:
3:4
passing speed
The speed at which the electronic tag can be effectively read and written when it passes through the reader:
3:5
Information about the relative position, speed and direction of movement of the container and the reader:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17894-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 17894-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17894-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17894-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17894-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17894-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|