|
US$154.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17850.6-2011: Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17850.6-2011 | English | 154 |
Add to Cart
|
3 days [Need to translate]
|
Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
| Valid |
GB/T 17850.6-2011
|
PDF similar to GB/T 17850.6-2011
Basic data | Standard ID | GB/T 17850.6-2011 (GB/T17850.6-2011) | | Description (Translated English) | Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A29 | | Classification of International Standard | 25.220.10 | | Word Count Estimation | 8,877 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-10-01 | | Quoted Standard | ISO 11127-1-1993; ISO 11127-2-1993; ISO 11127-3-1993; ISO 11127-4-1993; ISO 11127-5-1993; ISO 11127-6-1993; ISO 11127-7-1993 | | Adopted Standard | ISO 11126-6-1993, IDT | | Regulation (derived from) | National Standard Approval Announcement 2011 No.23 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the use of iron slag abrasive blast cleaning particle size range, apparent density, Mohs hardness, moisture, flooding the electrical conductivity and the content of water-soluble chloride solution. Requirements specified in this section apply only to not use too abrasive, does not apply to the use of too abrasive. Test methods for non-metallic blast cleaning abrasives see the various parts of ISO 11127. | GB/T 17850.6-2011: Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 6: Iron furnace slag
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 6. Iron furnace slag
ICS 25.220.10
A29
National Standards of People's Republic of China
Before application of paints and surface treatment of steel
Technical requirements for non-metallic blast - cleaning abrasives
Part 6. Iron furnace
Part 6. Ironfurnaceslag
(ISO 11126-6.1993, IDT)
Issued on. 2011-12-30
2012-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 17850 "steel substrates before application of paints and non-metallic blast - cleaning abrasives" is divided into the following sections.
--- Part 1. introduction and classification;
--- Part 2. silica sand;
--- Part 3. Copper refinery slag;
--- Part 4. Coal furnace slag;
--- Part 5. Nickel refinery slag;
--- Part 6. Iron furnace;
--- Part 7. Fused aluminum oxide;
--- Part 8. Olivine sand;
--- Part 9. Cross stone;
--- Part 10. garnet;
--- Part 11. Special steel slag sand.
This section GB/T 17850 Part 6.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This section uses the translation method identical with ISO 11126-6.1993 "before application of paints and surface treatment of steel mill blast - cleaning nonmetallic
Material technology - Part 6. Iron furnace. "
Consistency correspondence between this part of international documents and normative references of our files are as follows.
--- GB/T 17849-1999 steel substrates before application of paints and non-metallic blast - cleaning abrasives Test Method (eqv
ISO 11127-1 ~ 11127-7.1993).
This part made the following editorial changes.
--- Is clearly visible, in Article 6.1 adds two numbers.
This part is proposed by the China State Shipbuilding Corporation.
This part of the National Standardization Technical Committee before painting and metal surface treatment and painting processes Technical Committee paint pigment (SAC /
TC5/SC6) centralized.
This section drafted by. China State Shipbuilding Corporation eleventh Institute, Technical and Economic Research Institute of China Shipbuilding Industry.
The main drafters of this section. Fu Jianhua, Jiang Feng, Song Yanyuan.
Before application of paints and surface treatment of steel
Technical requirements for non-metallic blast - cleaning abrasives
Part 6. Iron furnace
Warning. For the surface treatment used equipment, materials and abrasive, if not careful, may be hazardous. Many countries in the use of
During or after use (waste management) that the presence of hazardous materials and abrasives such as. free silicon, carcinogenic or toxic substances, provisions are made.
Therefore, compliance with these requirements. It is important to ensure that appropriate guidance be given and all precautions required to be implemented.
1 Scope
GB/T 17850 provisions of this part of the iron-smelting slag blast - cleaning abrasive particle size range, the apparent density, Mohs hardness, containing
Water, flooding the electrical conductivity and the content of water-soluble chloride solution.
The requirements of this provision apply only to non abrasive used, does not apply to used abrasive.
Test methods for non-metallic blast - cleaning abrasives found in various parts of ISO 11127.
Note 1. The world standard reference generally relevant non-metallic abrasives see Appendix A.
Note 2. Although this section to meet the requirements of special steel surface treatment developed, but these features provisions generally apply to the use of blast cleaning
Surface or parts of other materials processing technology. These provisions have been in ISO 8504-2.20001) "before application of paints and surface treatment of steel surface
Processing methods - Part 2. Abrasive blast clean-up "below.
1) The standard ISO 11126-6.1993 for ISO 8504-2.1992. GB/T 18839.2-2002 to modify the use of ISO 8504-2.2000.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ISO 11127-1.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 1.
Sampling (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelatedproducts-Testmethods
fornon-metalicblast-cleaningabrasives-Part 1. Sampling)
ISO 11127-2.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 2.
Determination of particle size distribution (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelated
products-Testmethodsfornon-metalicblast-cleaningabrasives-Part 2. Determinationofparticle
sizedistribution)
ISO 11127-3.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 3.
Determination of apparent density (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelatedproducts-
Testmethodsfornon-metalicblast-cleaningabrasives-Part 3. Determinationofapparentdensity)
ISO 11127-4.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 4.
By water glass slide test to assess hardness (Preparationofsteelsubstratesbeforeapplicationofpaintsandrelated
products-Testmethodsfornon-metalicblast-cleaningabrasives-Part 4. Assessmentofhardnessby
aglassslidetest)
ISO 11127-5.1993 steel substrates before application of paints and test methods for non - metallic blast - cleaning abrasives - Part 5.
|