|
US$304.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17650.2-2021: Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Status: Valid GB/T 17650.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17650.2-2021 | English | 304 |
Add to Cart
|
3 days [Need to translate]
|
Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity
| Valid |
GB/T 17650.2-2021
|
| GB/T 17650.2-1998 | English | 239 |
Add to Cart
|
3 days [Need to translate]
|
Test on gases evolved during combustion of materials from cables. Part 2: Determination of degree of acidity of gases by measuring pH and conductivity
| Obsolete |
GB/T 17650.2-1998
|
PDF similar to GB/T 17650.2-2021
Basic data | Standard ID | GB/T 17650.2-2021 (GB/T17650.2-2021) | | Description (Translated English) | Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K13 | | Word Count Estimation | 16,123 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 17650.2-2021: Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test on gases evolved during combustion of materials from cables or optical fiber cables-Part 2.Determination of acidity (by pH measurement) and conductivity
ICS 29.060.01
CCSK13
National Standards of People's Republic of China
Replace GB/T 17650.2-1998
When the material taken from the cable or optical cable burns
Test method for released gas
Part 2.Acidity (measured with pH) and
Determination of conductivity
andconductivity
[IEC 60754-2.2019,Testongasesevolvedduringcombustionofmaterials
fromcables-Part 2.Determinationofacidity(bypHmeasurement)
Released on 2021-04-30 and implemented on 2021-11-01
State Administration of Market Supervision and Administration
Issued by the National Standardization Management Committee
Table of contents
Foreword Ⅲ
Introduction Ⅴ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 Principle of test method 1
5 Test device 2
6 Sample 3
7 Test procedure 4
8 Evaluation of test results 5
9 Performance requirements 5
10 Test report 6
Appendix A (informative) Recommended performance requirements 10
Reference 11
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents"
Drafting.
This document is the second part of GB/T 17650 "Test methods for gas released when materials taken from cables or optical cables burn".
GB/T 17650 has released the following parts.
---Part 1.Determination of the total amount of halogen acid gas;
---Part 2.Determination of acidity (measured by pH) and conductivity.
This document replaces GB/T 17650.2-1998 "Test method for gas released when materials taken from cables or optical cables burn, Part 2
Part. Measuring the acidity of gas by measuring the pH value and conductivity", compared with GB/T 17650.2-1998, except for structural adjustment and editing
In addition to the changes, the main technical changes are as follows.
---Added terms and definitions about pH and conductivity (see Chapter 3);
---Added the safety requirements during gas absorption (see 5.1 Note 2 and 7.3);
---Modified the size requirements (see 5.2, 5.3, 5.4, 3.1, 3.2, 3.3 in the.1998 edition);
---The requirements for the pH value and conductivity of the water have been modified, and the maximum inner diameter and the maximum inner diameter of the end of the glass tube inserted into the washing bottle have been added.
The inner diameter requirements of glass bottles that meet the requirements for bottle washing use (see 5.5, 3.4 in the.1998 edition);
---Modified the formula expression method of air flow in the tube and the units of air flow and air velocity, and added different tube inner diameters
The air flow range (see 5.6, 3.5 in.1998 edition);
---Modified the requirements of balance accuracy (see 5.7, 3.6 in.1998 edition);
---Added the requirements for laboratory glassware (see 5.8);
---Modified the conductivity meter range (see 5.10, 3.6 in.1998 edition);
---Modified the requirements for sample preparation (see 6.1, Chapter 5 of the.1998 edition);
---The calculation formula for the mass of the sample has been added (see 6.3);
---Modified the heating program (see 7.3, Chapter 6 of the.1998 edition);
---Modified the cleaning procedure (see 7.4, Chapter 6 of the.1998 edition);
---Modified the solution temperature during the pH value and conductivity test (see 7.5, 7.2 of the.1998 edition);
---Modified the test result evaluation (see Chapter 8, Chapter 8 of the.1998 edition);
---Modified Figure 1, Figure 2, Figure 3, Figure 4, Figure 5 (see Figure 1, Figure 2, Figure 3, Figure 4, Figure 5,.1998 edition of Figure 1, Figure 2, Figure 3, Figure 4,
Figure 5);
---Modified the recommended performance requirements (see Appendix A, Chapter 9 of the.1998 edition).
The translation method used in this document is equivalent to the IEC 60754-2.2019 ``Test Methods for Gas Released When Materials Taken from Cables are Burned''.
Part 2.Determination of acidity (measured by pH) and conductivity.
The Chinese documents that have consistent correspondence with the normatively cited international documents in this document are as follows.
---GB/T 6682-2008 Analytical laboratory water specifications and test methods (ISO 3696.1987, MOD);
---GB/T 12806-2011 Laboratory glassware single mark volumetric flask (ISO 1042.1998, NEQ).
This document has made the following editorial changes.
---In order to be consistent with the existing standard series, the standard name is changed to "The test method for the gas released when the material taken from the cable or optical cable burns.
Method Part 2.Determination of acidity (measured by pH) and conductivity.
Please note that some of the contents of this document may involve patents. The issuing agency of this document is not responsible for identifying patents.
This document was proposed by the China Electrical Equipment Industry Association.
This document is under the jurisdiction of the National Wire and Cable Standardization Technical Committee (SAC/TC213).
Drafting organizations of this document. Shanghai National Cable Testing Center Co., Ltd., Jiangsu Shangshang Cable Group Co., Ltd., Shanghai Capot cable materials
Factory Co., Ltd., Jiangsu Zhongtian Technology Co., Ltd., Shanghai Cable Research Institute Co., Ltd., China General Nuclear Power High-tech Nuclear Material Technology (Suzhou) Co., Ltd.
Company, Baosheng Technology Innovation Co., Ltd., Zhejiang Wanma Co., Ltd., Far East Cable Co., Ltd., Yangzhou Shuguang Cable Co., Ltd.
Company, Suzhou Henry Communication Material Co., Ltd., Wuxi Jiangnan Cable Co., Ltd., Hunan Valin Cable Co., Ltd., Jinbei Electric Co., Ltd.
Co., Ltd., Fujian Nanping Solar Cable Co., Ltd., Jiangsu Hengtong Power Cable Co., Ltd., TBEA Shandong Luneng Taishan Cable
Co., Ltd., Anhui Huaxing Cable Group Co., Ltd., Qingdao Hanlan Co., Ltd., National Fireproof Building Material Quality Supervision and Inspection Center,
Jiangsu Yongding Co., Ltd., Shanghai Moen Electric Co., Ltd., Hangzhou Cable Co., Ltd., Shanghai Pudong Wire and Cable (collection
Group) Co., Ltd., Zhejiang Chenguang Cable Co., Ltd., Guangzhou Nanyang Cable Co., Ltd., Jinlongyu Group Co., Ltd., Sunway
Co., Ltd., Hainan Weite Cable Co., Ltd., Changfeng Cable Co., Ltd., Ningbo Qiguan Cable Co., Ltd., Hebei Huatong Cable Co., Ltd.
Group Co., Ltd., Zhongchen Cable Co., Ltd., Shenzhen Xinaoke Cable Co., Ltd., Hebei Xinbaofeng Wire and Cable Co., Ltd., Shenyang
Yang Jiewei Technology Development Co., Ltd., Guangdong Cable Factory Co., Ltd.
The main drafters of this document. Ding Xiaoqing, Ling Guozhen, Duan Chunlai, Ge Yongxin, Hong Ningning, Fei Churan, Fang Quansheng, Liu Huanxin, Xu Jing,
Liang Guohua, Zhang Liben, Ma Zhuang, Zhang Gongzhuo, Yang Wenfeng, Fan Defa, Zheng Jianping, Long Qin, Wu Junsheng, Chen Peiyun, Feng Jun, Chen Xiaohong, Hu Shaozhong,
Teng Zhaofeng, Chen Wei, Yue Zhenguo, Wang Zhihui, Li Yunhuan, Shen Zhifei, Li Ju, Kong Deqing, Wen Shanghai, Wang Huaian, Xu Qifa, Li Fulong, Wujian Province,
Liu Kun, Gao Weihong, Dai Na, Song Jiawei, Shan Liming, Jia Mingming, Zhang Shuyuan.
The previous versions of this document and the documents replaced are as follows.
---In.1998, it was first published as GB/T 17650.2-1998;
---This is the first revision.
Introduction
Cable or optical cable users are very concerned about the amount of acid gas released when the insulation, sheath and other materials of the cable or optical cable burn, because this
Acidic gases can cause extensive damage to electrical and electronic equipment that are not involved in a fire. Therefore, it is necessary to develop a measuring cable or
The approved method for the amount of acid gas released when the material of the optical cable is burned.
GB/T 17650 provides a method to determine the amount of acid gas
Or reach an agreement on the limit value of the optical cable specification. Since this test is not carried out on the entire cable or optical cable sample, the evaluation of the degree of harmfulness
The determination must also take into account the actual volume of the material that constitutes the cable or optical cable.
The recommended pH and conductivity recommended values can only be regarded as an indication, because the relationship between corrosion and these two parameters may not be able to cover
Include all materials.
The purpose of GB/T 17650 is to establish a test method standard for gas released when materials taken from different cables or optical cables burn.
It consists of the following 3 parts.
---Part 1.Determination of the total amount of halogen acid gas. The purpose is to establish a combustion release suitable for materials taken from different cables or optical cables.
Test method for the total amount of halogen acid gas in the exhaust gas;
---Part 2.Determination of acidity (measured by pH) and conductivity. The purpose is to establish
Test methods for acidity (measured by pH) and electrical conductivity of gases released when materials are burned;
---Part 3.Determination of low-level halogen by ion chromatography (planned). The purpose is to establish suitable for different cables or optical cables
The test method for the release of low-content halogen in the gas when the material burns.
The test equipment in Part 1 and Part 2 of this document is basically the same, but it should be noted that the test procedures are quite different.
When the material taken from the cable or optical cable burns
Test method for released gas
Part 2.Acidity (measured with pH) and
Determination of conductivity
1 Scope
This document specifies the acidity of the gas dissolved in the aqueous solution by measuring the material on the cable or optical cable components during the combustion process
(pH) and electrical conductivity, to determine its potential corrosive devices and procedures.
The method specified in this document is suitable for testing the various components of cables or optical cables. Gives the weights for calculating the combination of materials in the cable or optical cable
Value formula. This method can verify the relevant requirements of each component in the cable or optical cable structure specified in the cable or optical cable standard.
The simplified method listed in this document is only to prove that each component meets the performance requirements specified for quality control purposes.
Note 1.The relevant cable or optical cable standard should specify which components in the cable or optical cable should be tested, and which calculation method should be used in case of dispute
(See Chapter 8).
Note 2.This method can be used to test the materials used in the production of cables or optical cables, but it is not appropriate to declare the performance of cables or optical cables based on such a test.
Note 3.The term "cable" in this document refers to all insulated metal conductor cables that transmit energy or signals.
2 Normative references
The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations
Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to
This document.
ISO 1042 Laboratory glassware-One-mark volumetric flask
flasks)
ISO 3696 Analytical laboratory water specifications and test methods (Waterforanalyticallaboratoryues-Specification
andtestmethods)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
pH value
Under the conditions specified in this document, the pH of an aqueous solution formed by dissolving the gas released when the material is burned in water.
3.2
Conductivityvalue
Under the conditions specified in this document, the conductivity of an aqueous solution formed by dissolving the gas released when the material is burned in water.
4 Principles of the test method
The test material should be heated in a stream of dry air. The released gas should bubble through a washing bottle filled with distilled or deionized water
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17650.2-2021_English be delivered?Answer: Upon your order, we will start to translate GB/T 17650.2-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17650.2-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17650.2-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17650.2-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17650.2-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|