Search result: GB/T 17492-2019 (GB/T 17492-2012 Older version)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17492-2019 | English | 359 |
Add to Cart
|
4 days [Need to translate]
|
Industrial woven wire cloth - Technical requirements and tests
| Valid |
GB/T 17492-2019
|
| GB/T 17492-2012 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Industrial woven wire cloth -- Technical requirements and testing
| Obsolete |
GB/T 17492-2012
|
| GB/T 17492-1998 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
Industrial woven wire cloth--Technical requirements and testing
| Obsolete |
GB/T 17492-1998
|
| Standard ID | GB/T 17492-2019 (GB/T17492-2019) | | Description (Translated English) | Industrial woven wire cloth -- Technical requirements and tests | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A28 | | Classification of International Standard | 19.120 | | Word Count Estimation | 18,176 | | Date of Issue | 2019-12-10 | | Date of Implementation | 2020-07-01 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration |
GB/T 17492-2019
(Industrial wire braided mesh technical requirements and inspections)
ICS 19.120
A28
National Standards of People's Republic of China
Replaces GB/T 17492-2012
Technical requirements and inspection of industrial wire woven mesh
(ISO 9044..2016, MOD)
2019-12-10 release
2020-07-01 implementation
State Administration of Market Supervision
Published by the National Standardization Management Committee
Contents
Foreword III
1 range 1
2 Normative references 1
3 Terms and definitions 1
4 Technical requirements 3
4.1 Combination of mesh size and wire diameter 3
4.2 Mesh Size Tolerance 3
4.3 Permitted number of major defects 6
4.4 Maximum allowable deviation of overall dimensions 6
4.5 Flatness 6
4.6 Appearance 6
4.7 Wire 6
5 Inspection method 7
5.1 Wire diameter 7
5.2 Mesh size 7
5.3 Material composition 9
5.4 Overall dimensions 9
5.5 Weaving defects 9
6 Quality documents 9
6.1 Certificate of conformity 9
6.2 Test report 9
6.3 Third party inspection report 9
6.4 Chemical analysis 9
6.5 Other tests 9
7 Ordering Information 9
7.1 Basic information 9
7.2 Additional information 9
8 Ships 10
8.1 Net Volume 10
8.2 Packaging 10
8.3 Marker 10
Appendix A (Informative) Major Defects 11
Appendix B (informative) Calculation of the average mesh size and standard deviation 12
Appendix C (informative) Interpolation calculation of mesh size limit standard deviation s0 13
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 17492-2012 "Technical Requirements and Inspection of Industrial Wire Woven Mesh". With GB/T 17492-
Compared with.2012, the main technical content changes are as follows.
--- Revised the terms and definitions, deleted the original definitions of "3.6 unit length net holes" "3.11 net block" and "3.12 net bar";
--- Revised the technical requirements for mesh size tolerance in 4.2, and improved the average size limit deviation of austenitic stainless steel wire mesh
Difference and mesh size limit deviation technical requirements, see formula (1) and formula (5); reduce the average size limit of other wire braided mesh
Deviation and mesh size limit deviation Technical requirements, see formulas (2) and (6); change the number of large holes in the mesh to check the size of the mesh
Standard deviation
--- Modified the "4.3 Allowable Number of Major Defects" to improve the technical requirements for major defects, see Table 2;
--- Amended the title of 4.5, and changed the "flatness of wire mesh" to "flatness";
--- Modified the title of 4.6 and changed the "surface state" to "appearance";
--- 4.6 added "the processing traces may appear on the surface of the woven wire mesh";
--- Deleted the original "General Requirements" and "Testing Devices" in Chapter 5;
--- Modified the content of the item 5.1d), changed "using optical projection method" to "measurement by optical projection method or scanning method";
--- Modified 5.2.1.3, added the item e) "The warp and weft directions are randomly measured with no less than 20 mesh sizes";
--- Add "6.1 Certificate of Conformity";
--- Amended the "7 Ordering Information" regulations, changed "a) quality requirements" to "a) required quantity";
--- Amended the "8 Delivery" regulations, changed "the length of the roll can have a tolerance of 10%" in 8.1.1 to "the length of the net roll can be no more than
After a deviation of ± 10% ", change 8.1.2" A roll of wire braided net can consist of up to three rolls of scattered nets "to" a roll of wire braid
Weaving nets can consist of a maximum of two segments, "as changed in 8.1.3, but it can exceed 2%. Should measure total width "but" cannot
Over 2%. The width of the entire roll should be measured ", and changed the" total length or net block size and quality "in 8.1.4 to" overall dimensions
And the number of net blocks ";
--- Amended the informative appendix A, deleted "A.9 latitude parallel sparse road" and "A.10 Kushiro";
--- Added informative appendix B;
--- Added informative Appendix C.
This standard uses the redrafting method to modify and adopt ISO 9044..2016 "Technical Requirements and Inspection of Industrial Wire Woven Mesh".
There are technical differences between this standard and ISO 9044..2016.The provisions related to these differences have passed the
Vertical single lines (|) are marked. The technical differences and their causes are as follows.
--- Added "filtering" to the scope of Chapter 1 (see Chapter 1);
--- Regarding the normative reference documents, this standard has made adjustments with technical differences to suit China's technical conditions and the situation of adjustment.
The situation is reflected in Chapter 2 "Regulatory Reference Documents", and the specific adjustments are as follows.
● Replace ISO 4783-1. 1989 with GB/T 5330.1-2012, which adopted the international standard;
● Replace ISO 2194..1991 with GB/T 10611-2003 which adopts international standards;
● Replaced ISO 4783-2. 1989 with GB/T 19628.2 which adopted the international standard;
● Non-equivalent use of international standards JB/T 7860-2000 instead of ISO 4782;
--- Modify the data in Table 1 and change the 40th column (7) column "43" to "40", and the 32m row (4) column "35" to "32" and (7) column
"39" is "32" (see 4.2.1);
--- Modified the number of network segments (see 8.1.2).
This standard also makes the following editorial changes.
--- Delete references.
This standard is proposed and managed by the National Particle Characterization and Classification Inspection and Screen Standardization Technical Committee (SAC/TC168).
This standard was drafted. Hebei Inkamo Metal Mesh Co., Ltd., Fujian Qianglun New Materials Co., Ltd., Xinxiang Bashan Aviation Material
Co., Ltd., Hubei Handan Electromechanical Co., Ltd., China Machine Productivity Promotion Center, Xinxiang Xinhang Wire Mesh Filter Co., Ltd., Anping Shengfa Metal
Products Co., Ltd., Hebei Wire Mesh Product Quality Supervision and Inspection Center, Wuhu Dingheng Material Technology Co., Ltd., Yingkaimo Metal Mesh Co., Ltd.,
Texas Fullland Filter Co., Ltd.
The main drafters of this standard. Yan Xiangyang, Huang Chaoqiang, Bai Qianyang, Ge Yan, Wang Gongxue, Hou Changge, Song Guojian, Wang Yakai, Liu Xufeng,
Cheng Jingqing, Wang Rongrong, Wang Tan, and Chen Lixin.
The previous versions of the standards replaced by this standard are.
--- GB/T 17492-1998, GB/T 17492-2012.
Technical requirements and inspection of industrial wire woven mesh
1 Scope
This standard specifies the terms and definitions, technical requirements, inspection methods, and quality documents for industrial wire woven meshes used for screening and filtration.
Items, ordering information, and shipping.
This standard applies to industrial wire woven square hole mesh made of steel, stainless steel or non-ferrous metals.
This standard does not apply to wire-plated wire mesh, pre-bent wire-woven mesh, and wire-welded mesh after weaving.
Wire woven mesh for screening and filtering purposes can refer to the use of this standard. When ordering, the supply and demand sides negotiate to determine specific technical requirements.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest version (including all amendments) applies to this document.
GB/T 5330.1 Industrial Wire Mesh and Wire Woven Mesh Selection Guide for Combination of Mesh Size and Wire Diameter Part 1
Part. General (GB/T 5330.1-2012, ISO 4783-1. 1989, MOD)
GB/T 10611 Industrial marking method and mesh size series (GB/T 10611-2003, ISO 2194..1991, MOD)
GB/T 19628.2-2005 Industrial Wire Mesh and Wire Woven Mesh Selection Guide for Combination of Mesh Size and Wire Diameter
Selection of preferred combinations of wire meshes (ISO 4783-2. 1989, MOD)
JB/T 7860-2000 Industrial wire
3 terms and definitions
The following terms and definitions apply to this document.
3.1
Mesh size aperturewidth
The distance between adjacent warp or weft threads.
Note. Measure in the middle of the projection plane mesh, see Figure 1.
......
GB/T 17492-2012
ICS73.120
A28
National Standards of People's Republic of China
Replacing GB/T 17492-1998
Industrial wire braid
Technical requirements and testing
(ISO 9044.1999, MOD)
Issued on. 2013-10-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 17492-1998 "industrial woven wire cloth - Technical requirements and testing." And GB/T 17492-1998
Compared to the main technical content changes are as follows.
--- Delete the original standard in Table 3;
--- Delete diagram illustrating 3Xi, Yi and Zi arrangement;
--- Increasing the provision of quality documentation (see Chapter 6);
--- Increased the order information (see Chapter 7);
--- Modify the terms and definitions, terms and definitions will be moved to the main defect in Appendix A;
--- Modify the predetermined length tolerances (see 4.4);
--- Modify the provisions of the material (see 4.7);
--- Modify the standard icon;
--- Modify the order of test methods (see Chapter 5);
--- Modified shipping information (see Chapter 8);
--- Added Appendix A.
This standard uses redrafted law revision adopted ISO 9044.1999 "Industrial woven wire cloth - Technical requirements and testing" (English
Chinese Version).
This standard and ISO 9044.1999 technical differences exist, the terms of these differences have been involved in the blank position by its outer margins
A single vertical line (|) were marked differences between the technical and the following reasons.
--- On normative references, this standard has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation
Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.
● GB/T 10611-2003 industrial mesh labeling method and the mesh size series (ISO 2194.1991, MOD);
● GB/T 5330.1-2012 industrial braid mesh size in combination with the diameter of wire screens and wire wire
Selection Guide Part 1. General (ISO 4783-1. 1989, MOD);
● GB/T 19628.2-2005 industrial woven mesh aperture size and wire diameter combinations selected from the wire mesh and wire
Priority combination elective guide wire braid (ISO 4783-2. 1989, MOD);
--- Increased our standard JB/T7860-2000 (see Chapter 2);
--- Modify the terms and definitions (see Chapter 3);
--- Modify the predetermined length tolerances (see 4.4);
--- Modify the provisions of wire diameter tolerances (see 4.7.2);
--- General expressed increased 5.1 and 5.2 test device.
This standard also made the following editorial changes.
--- Deleted references.
The standard characterization and sorting by the National Standardization Technical Committee and mesh particles (SAC/TC168) and focal points.
This standard was drafted. the machine Productivity Promotion Center, Xinxiang Bashan Precision Filter Co., Ltd. Anping Anwar network hardware category Products
Limited.
The main drafters of this standard. Yu Fang, Liu Heqing, Xu Lan will.
This standard replaces the standards previously issued as follows.
--- GB/T 17492-1998.
Industrial wire braid
Technical requirements and testing
1 Scope
This standard specifies the terms and definitions used for screening and filtration of industrial woven wire cloth, technical requirements, test methods, quality documents,
Ordering and shipping information and other content.
This standard is applicable to their material is steel, stainless steel or non-ferrous industrial woven wire square mesh. Not available in gold plated after weaving
Genus wire cloth, pre-bent shaped metal wire cloth and wire mesh welding.
For purposes other than screening wire braid, when ordering by both parties to reach an agreement before use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 10611 industrial mesh labeling method and the mesh size range (GB/T 10611-2003, ISO 2194.1991, MOD)
GB/T 5330.1 industrial wire screens and woven wire mesh size and wire diameter combinations Selection Guide 1
Part I. General (GB/T 5330.1-2012, ISO 4783-1. 1989, MOD)
GB/T 19628.2-2005 industrial metal mesh and woven wire mesh size and wire diameter combinations - choose means
Priority south portfolio selection wire braid (ISO 4783-2. 1989, MOD)
JB/T7860 industrial metal wire mesh
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Mesh size aperturesize
Between two adjacent warp or weft yarn from the intermediate projection plane position measurement, see Figure 1.
Figure 1 mesh size, wire diameter and pitch
......
|