|
US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17389-2013: Recommended practice for the application of electrical submersible cable system
Status: Valid GB/T 17389: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17389-2013 | English | 649 |
Add to Cart
|
5 days [Need to translate]
|
Recommended practice for the application of electrical submersible cable system
| Valid |
GB/T 17389-2013
|
| GB/T 17389-1998 | English | 999 |
Add to Cart
|
4 days [Need to translate]
|
Recommended practice for application of ESP submersible cable systems
| Obsolete |
GB/T 17389-1998
|
PDF similar to GB/T 17389-2013
Basic data | Standard ID | GB/T 17389-2013 (GB/T17389-2013) | | Description (Translated English) | Recommended practice for the application of electrical submersible cable system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | E92 | | Classification of International Standard | 75.180.10 | | Word Count Estimation | 28,218 | | Older Standard (superseded by this standard) | GB/T 17389-1998 | | Quoted Standard | ASTM B3; ASTM B8; ASTM B33; IEEE 1018; IEEE 1019; NEMA WC-CODE | | Adopted Standard | API RP 11S5-2008, MOD | | Regulation (derived from) | National Standards Bulletin 2013 No. 27 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the structure and size of the cable conductor submersible, submersible cable insulation, sheathing, preparation and protective layers, stainless steel and alloy steel with applications and limitations, and ancillary equipment and c | GB/T 17389-2013: Recommended practice for the application of electrical submersible cable system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Recommended practice for the application of electrical submersible cable system
ICS 75.180.10
E92
National Standards of People's Republic of China
Replacing GB/T 17389-1998
Application of Electric Submersible Pump Cable Systems
Issued on. 2013-12-31
2014-10-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
3.1 General 1
3.2 Temperature 5
3.3 Brand 5
4 conductor cable structure form and structure 5
4.1 Scope 5
4.2 Description 6
5 7 conductor cable
5.1 Description 7
5.2 Applications 8
5.3 restricted 8
6 cable insulation system 9
6.1 General 9
6.2 9 thermoplastic material
6.3 thermosetting material 10
6.4 insulating film 10
6.5 Auxiliary extruded insulation 10
7 jacket 11
11 7.1 Description
11 7.2 Applications
7.3 limit 11
8 braid and a protective layer 11
8.1 General 11
8.2 braid 12
8.3 barrier tape 12
8.4 extruded barrier layer 13
8.5 Lead Sheath 13
8.6 backing material 14
9 armored 14
9.1 General 14
9.2 galvanized steel 15
9.3 stainless steel 15
9.4 stainless steel alloy strip 16
10 Cable accessories 16
Description 16 10.1
10.2 downhole monitoring sensors 16
10.3 reflux relay 16
10.4 cable clamps 16
10.5 downhole cable guide system 16
10.6 coiled tubing guide system 17
11 17 joints and terminations
11.1 General 17
17 11.2 Factory repair
11.3 Factory single wire extension process 17
11.4 coupling 18
19 11.5 Termination
11.6 typical cable connection 19
Appendix A (normative) power cost analysis 20
Appendix B (normative) Cable Selection Guide 21
References 23
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 17389-1998 "submersible pump cable system applications," compared with the GB/T 17389-1998, the major change
Of the following.
--- Added "normative references" ASTM A459, ASTM B3, ASTM B8, ASTM B33, IEEE1018,
IEEE1019, NEMAWC-Code and NFPA70 (see Chapter 2);
--- Added "American Wire Gauge", "carrying capacity" and "Dielectric strength", and other terms and definitions (see 3.1.1,3.1.2,3.1.6,3.1.8,
3.1.23,3.1.26,3.1.30,3.1.32,3.1.34,3.1.35,3.1.38,3.1.39,3.3.4,3.3.6,3.3.7 and 3.3.9);
--- The "ethylene propylene monomer" to "EPR" (see 3113, 1998, version 2.1.9.);
--- Deleted "polyvinylidene fluoride", "Halle" and "harem" and other terms and definitions (the 1998 edition 2.1.26,2.3.2 and 2.3.3);
--- Revised GB/T 17389-1998 "on Figure 2.5.1 form conductor structure; modified" form of conductor configuration and typical single cable
Element structure diagram "(see Fig. 1, 1998 edition of Figure 2.5.1, Figure 2.5.2, Figure 2.5.3, Figure 2.5.4, Figure 2.5.5, Figure 2.5.6, Fig.
2.5.7, Figure 2.5.8 and 2.5.9);
--- Added "cable conductor sizes Metric Standard" and "cable conductor size British Standard" (see Tables 1 and 2);
--- Remove the "conductor" on account of the aluminum conductor (the 1998 edition 3.1.2,3.1.3 and 4.2.3);
--- The "polypropylene adaptation temperature range of -10 ℃ to 96 ℃" was changed to "polypropylene adapt to the temperature range -35 ℃ to 96 ℃" (see
. 622, 1998 edition 4.2.2);
--- The "pinch stranded conductor diameter concentric stranded conductor diameter of 98%" to "compress multi-strand
The diameter of the conductor is concentric stranded conductor diameter of 97%, "(see 52, 1998 version 3.1.2.);
--- The "Monel band" to "stainless steel metal band" (see 94, 1998 version 7.4.);
--- Added "cable accessories" (see Chapter 10);
--- Remove the "typical field-mounted connector," "typical wellhead and packer header" and "typical cable head" schematic (1998
Edition Figure 8.7.2, Figure 8.7.3 and 8.7.4);
--- Remove the "American Wire Gauge No. Metric Size" and "AISI316 and AISI409 stainless steel chemical composition and mechanical properties" (1998
Edition of Appendices C and D).
This standard uses the redrafted law revision adopted APIRP11S5.2008 "submersible pump cable system applications recommended practice" (in English).
This standard APIRP11S5.2008 The main technical differences are as follows.
--- Delete individual normative references;
--- Added "mil" and "circular mils" definition.
For ease of use, this standard also made the following editorial changes.
--- Increasing the metric units;
--- Removed APIRP11S5.2008 "special statement", "Introduction" and "Directory";
--- According to Chinese customary for some formatting has been modified.
This standard by the national oil drilling equipment and tools for Standardization Technical Committee (SAC/TC96) and focal points.
This standard was drafted. Daqing Oilfield Lishen Pump Co., Ltd., Shengli pump limited liability company, the Bohai Sea oil rig
Machinery manufacturing subsidiaries, the national electric submersible pump Quality Supervision and Inspection Center.
The main drafters of this standard. Li Bin, Wang Daojun, Wang Wei, Shizhong Wu, Wang Zhaolan, Wang Peng, Zheng expensive, Lu Xiaoyun.
This standard replaces the previous version of the standard release of case.
--- GB/T 17389-1998.
Application of Electric Submersible Pump Cable Systems
1 Scope
This standard specifies the structure and size of the submersible cable conductor, submersible cable insulation, sheathing, preparation and protective layers, with stainless steel
Coupling and termination methods and alloy steel strip and cable applications and limitations of auxiliary equipment and cables.
This standard applies to manufacturers, distributors and users of the submersible cable size, structure, materials and auxiliary equipment applications.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
ASTMB3 soft or annealed copper standards
ASTMB8 hard, medium-hard or soft standards Concentric Stranded Copper conductors
Standard Specification for Electric ASTMB33 with tinned or annealed copper wire
IEEE1018 submersible pump cable performance technical regulations ethylene-propylene rubber insulation
IEEE1019 submersible pump cable performance technical provisions polypropylene insulation
NEMAWC-Code wire and cable regulations
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 General
3.1.1
American Wire Gauge AWG-Americanwiregauge
Provision of non-ferrous metal wire gauge standard series, with the increasing number of wire gauge, wire diameter decreasing.
3.1.2
Ampacity ampacity
The amount of current measured in amperes, i.e. under conditions of use, the amount of current passing conductors can continue. The current temperature will not result in the cable
Exceeds the allowed level.
3.1.3
Antioxidants antioxidants
Adding the rubber compound material, which may be of rubber or plastic to prevent aging by delaying the hardening and embrittlement.
3.1.4
A mixture of compound
Some material was added to obtain the required mechanical properties of the base polymer blend. These mixtures are usually each manufacturer's proprietary feature
Side, each other vary, these differences will affect the performance of the cable.
3.1.5
Corrosion corrosion
By destroying the metal oxide surface. Corrosion agent itself or by chemical interaction with the well fluid is generated.
NOTE. galvanic corrosion is caused by the electrochemical reaction due to the current flowing between the Transmissive media (such as saline) in two different metals caused.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17389-2013_English be delivered?Answer: Upon your order, we will start to translate GB/T 17389-2013_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17389-2013_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17389-2013_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17389-2013?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17389-2013 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|