|
US$1464.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17382-2023: Series 1 freight containers - Handling and securing
Status: Valid GB/T 17382: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17382-2023 | English | 1464 |
Add to Cart
|
8 days [Need to translate]
|
Series 1 freight containers - Handling and securing
| Valid |
GB/T 17382-2023
|
| GB/T 17382-2008 | English | 2434 |
Add to Cart
|
7 days [Need to translate]
|
Series 1 freight containers -- Handling and securing
| Obsolete |
GB/T 17382-2008
|
| GB/T 17382-1998 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Series 1 freight containers--Handling and securing
| Obsolete |
GB/T 17382-1998
|
PDF similar to GB/T 17382-2023
Basic data | Standard ID | GB/T 17382-2023 (GB/T17382-2023) | | Description (Translated English) | Series 1 freight containers - Handling and securing | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A85 | | Classification of International Standard | 55.180.10 | | Word Count Estimation | 81,832 | | Date of Issue | 2023-11-27 | | Date of Implementation | 2024-03-01 | | Older Standard (superseded by this standard) | GB/T 17382-2008 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 17382-2023: Series 1 freight containers - Handling and securing---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 55:180:10
CCSA85
National Standards of People's Republic of China
Replace GB/T 17382-2008
Series 1 container handling and bolting
(ISO 3874:2017,IDT)
Published on 2023-11-27
2024-03-01 Implementation
State Administration for Market Regulation
Released by the National Standardization Administration Committee
Table of contents
Preface III
1 Scope 1
2 Normative references 1
3 Terms and Definitions 1
4 Basic requirements 5
5 loading and unloading 6
6 Specified lifting (lifting) methods 6
7 Grounding and Support 25
8 site stacking 25
9 Bolting during transportation 26
Appendix A (normative) Function, size, strength requirements and testing of container bolting and turning locks 37
Appendix B (normative) Function, size, strength requirements and testing of container bolting and stacking connectors 48
Appendix C (normative) Container bolting tie rod system (including fastening device) functions, dimensions, strength requirements and testing 55
Appendix D (informative) Container fastening device 59
Appendix E (normative) Strength requirements for container fastening devices 62
Appendix F (Informative) Selection Guide for Size, Positioning and Bolting Devices of Transport Vehicles for Bolting Series 1 Containers 65
Reference 76
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document replaces GB/T 17382-2008 "Series 1 Container Handling and Fastening": Compared with GB/T 17382-2008, except for the
In addition to structural adjustments and editorial changes, the main technical changes are as follows:
a) Changed the scope of application (see Chapter 1, Chapter 1 of the:2008 edition);
b) Change the term "eccentricity of the center of gravity" to "excursion of the center of gravity" and "moving center of gravity" to "dynamic center of gravity" (see 3:1:3, 3:1:4,
3:3 and 3:4 of the:2008 edition), changed the definition of the term "fastening device" (see 3:1:5, 3:5 of the:2008 edition), and added the following
Related terms and definitions of locks, stacking connectors, and tie rods (see 3:2~3:4);
c) Changed the operating instructions for cargo stacking and fastening (see 4:3,:2008 version of 4:3);
d) Delete the schematic diagram of cargo load distribution in the box (see Figure 1 of the:2008 version);
e) Added EEE and EE box-type spreader top lifting operations, sling top lifting operations, bottom lifting sling operations, side lifting operations, and end lifting operations
The scope of application for operations and fork lifting operations (see Table 3~Table 5, Table 7~Table 12);
f) Changed the instructions for deck grid guide posts, container transport ships, various types of bolting, lashing and handling devices, as well as bolting and lashing
Figures (see Figures 18 to 21, Figures 19 to 22 of the:2008 version);
g) The functions, dimensions, strength requirements and test methods of fastening devices such as fully automatic twist locks, automatic container locks and intermediate locks are added (see
A:2:3~A:2:5, A:3:4, A:5, A:6, A:9, A:10:4, A:10:5);
h) The terms and definitions of “double-head twist lock” and “bolting hook” are deleted (see A:2:8 and D:2:3 of the:2008 edition);
i) Delete the function, size, strength requirements and test methods of latches (see Appendix B of the:2008 version);
j) The strength requirements and test methods of container bolting and stacking devices have been changed (see B:5, B:6, C:6 and C:7 of the:2008 edition);
k) The strength requirements and test methods of container bolting tie rod systems have been changed (see C:4~C:6, D:5~D:7 of the:2008 edition);
l) Added container fastening device (see Appendix D);
m) Added strength requirements for container fastening devices (see Appendix E):
This document is equivalent to ISO 3874:2017 "Series 1 Container Handling and Bolting":
This document has made the following minimal editorial changes:
---Deleted notes in some terms;
---Added footnotes for unit conversion;
---Added footnotes to the ISO 668 version description;
---The errata for the dimensions of 1CC/1C/1CX type containers in Table F:5 has been changed from "9058" to "6058":
Please note that some content in this document may be subject to patents: The publisher of this document assumes no responsibility for identifying patents:
This document is proposed and coordinated by the National Container Standardization Technical Committee (SAC/TC6):
This document was drafted by: Shanghai International Port (Group) Co:, Ltd:, Shanghai Maritime University, and Water Transport Research Institute of the Ministry of Transport:
The main drafters of this document: Zhang Junjie, Liu Yuan, Li Jichun, Wang Liming, Zhao Ning, Wang Qiuchen, Wu Chun, and Kong Lingshun:
This document was first published in:1997, revised for the first time in:2007, and this is the second revision:
Series 1 container handling and bolting
1 Scope
This document specifies the basic requirements for loading, unloading and bolting of Series 1 containers, loading and unloading, specified lifting (lifting) methods, landing and support, and site
Requirements for fastening during stacking and transportation:
This document applies to Series 1 containers, heavy and empty, produced and inspected in accordance with ISO 1496 (all parts):
2 Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, the dated quotations
For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to
this document:
mensionsandratings)
Note: GB/T 1413-2023 Series 1 Container Classification, Dimensions and Rated Mass (ISO 668:2020, IDT)
Note: GB/T 1992-2023 Container Terminology (ISO 830:1999, MOD)
Note: GB/T 1835-2023 Series 1 technical requirements for container corner fittings (ISO 1161:2016, MOD)
cationandtesting)
Note: GB/T 5338:1-2023 Series 1 Container Technical Requirements and Test Methods Part 1: General Containers (ISO 1496-1:2013, IDT);
GB/T 5338:2-2023 Series 1 Container Technical Requirements and Test Methods Part 2: Insulated Containers (ISO 1496-2:2018, IDT);
GB/T 5338:4-2023 Series 1 Technical requirements and test methods for containers Part 4: Unpressurized dry bulk containers (ISO 1496-4:1991,
MOD);
GB/T 5338:5-2023 Series 1 Container Technical Requirements and Test Methods Part 5: Platform and Rack Containers (ISO 1496-5:
2018,IDT);
GB/T 16563-2017 Series 1 Technical requirements and test methods for containers Part 3: Tank containers (ISO 1496-3:1995, IDT):
IMO/ILO/UNECEC Code of Prac-
3 Terms and definitions
The following terms and definitions as defined in ISO 830 apply to this document:
3:1 General
3:1:1
emptycontainer
A container that contains only its own status:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17382-2023_English be delivered?Answer: Upon your order, we will start to translate GB/T 17382-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17382-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17382-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17382-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17382-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|