HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 17288-2009 English PDF

US$214.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17288-2009: Liquid hydrocarbons -- Volumetric measurement by displacement meter systems
Status: Valid

GB/T 17288: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 17288-2009English214 Add to Cart 3 days [Need to translate] Liquid hydrocarbons -- Volumetric measurement by displacement meter systems Valid GB/T 17288-2009
GB/T 17288-1998English519 Add to Cart 3 days [Need to translate] Liquid hydrocarbons--Volumetric measurement by displacement meter systems other than dispensing pumps Obsolete GB/T 17288-1998

PDF similar to GB/T 17288-2009


Standard similar to GB/T 17288-2009

SY/T 6430   SH 0164   GB/T 21450   

Basic data

Standard ID GB/T 17288-2009 (GB/T17288-2009)
Description (Translated English) Liquid hydrocarbons -- Volumetric measurement by displacement meter systems
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard E08
Classification of International Standard 75.180.30
Word Count Estimation 11,184
Date of Issue 2009-03-16
Date of Implementation 2009-10-01
Older Standard (superseded by this standard) GB/T 17288-1998
Quoted Standard GB/T 17287-1998; ISO 91-2-1991
Adopted Standard ISO 2714-1980, IDT
Regulation (derived from) National Standard Approval Announcement 2009 No.2 (Total No.142)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the displacement meter system selection, installation, general principles of operation and maintenance. This standard applies to the measurement of volumetric flowmeter flow of liquid hydrocarbons, but not for measuring two-phase liquid.

GB/T 17288-2009: Liquid hydrocarbons -- Volumetric measurement by displacement meter systems

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Liquid hydrocarbons. Volumetric measurement by displacement meter systems ICS 75.180.30 E08 National Standards of People's Republic of China GB/T 17288-2009/ISO 2714. 1980 Replacing GB/T 17288-1998 Volume measurement of liquid hydrocarbons Displacement meter system (ISO 2714. 1980Liquidhydrocarbons-Volumetric dispensingpumps, IDT) Posted 2009-03-16 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is equivalent to international standards ISO 2714. 1980 "Liquid hydrocarbons - Volumetric measurement by displacement meter systems" (in English). This standard is equivalent translation ISO 2714. 1980, for ease of use, this standard made the following editorial changes. --- 'This International Standard' to replace the word 'this standard'; --- Remove the ISO standard preface; --- The ISO standards body preface listed separately, modifications of introduction. This standard replaces GB/T 17288-1998 "liquid hydrocarbon volumetric displacement meter system." Given the current ISO 2714 The latest release is no standard, no domestic technical standards changes and updates on nature, this amendment only to the original national standard GB/T 17288-1998 part and does not accurately describe the preparation of the format was modified. Appendix A of this standard is a normative appendix. The standard proposed by China National Petroleum Corporation. This standard by the National Standardization Technical Committee of Oil and Gas. This standard was drafted. China National Petroleum Corporation Metrology Institute. The main drafters of this standard. Fang Jingtao, Cao Yang, Wang Ping, Li Peng, Zhao Chenghai. This standard replaces the standards previously issued as follows. Equipment to remove impurities in the liquid particles measuring mechanism to prevent excessive wear and seizure. You can use a differential pressure gauge to judge when strainer or filter It should be cleaned. When the flowmeter for measuring clean liquids or confirmed flowmeter without protection, you can not install the protection equipment. Protective equipment Pressure gauge should be installed in order to determine the need for cleaning. 3.1.5 should be provided for the joint test equipment in the right place, to install test equipment shall comply with the relevant national standards and regulations. 3.2 Selection of volumetric flowmeter and auxiliary equipment 3.2.1 Content selection volumetric flowmeter and auxiliary equipment considered (see Figure A.1). Also consult the manufacturer. Installation space 3.2.1.1 metering device and test equipment. 3.2.1.2 meter size and pressure rating connection types, ancillary equipment. 3.2.1.3 measured liquid nature, including viscosity, density, saturation vapor pressure, resistance and lubricity, and will affect the performance of the meter Select the structure of the material. Viscosity increase generally increases the flow meter load bearing and pressure loss, viscosity changes can drift or calibration curve Change shape. It will increase the wear and tear meter when measuring non-lubricating fluids. 3.2.1.4 entrained fluid may be a certain amount of impurities, as well as a certain amount of water or steam. Consider traffic flow capacity and pressure Loss, these substances can affect the size of the filter, the filter and the gas-liquid separation equipment. 3.2.1.5 The maximum and minimum flow, continuous flow or drying room. 3.2.1.6 Pressure loss at maximum flow rate, flow meters and pressure range by the flow meter. 3.2.1.7 meter run temperature range, whether the volume needs to be corrected to standard reference temperature, the need for heating. 3.2.1.8 repair method and cost of spare parts required. GB/T 17288-2009/ISO 2714. 1980

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 17288-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 17288-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 17288-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 17288-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 17288-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17288-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.