|
US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 17196-2017: Connecting devices -- Flat quick-connect terminations for electrical copper conductors -- Safety requirements
Status: Valid GB/T 17196: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 17196-2017 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
Connecting devices -- Flat quick-connect terminations for electrical copper conductors -- Safety requirements
| Valid |
GB/T 17196-2017
|
| GB 17196-1997 | English | 759 |
Add to Cart
|
3 days [Need to translate]
|
[GB/T 17196-1997] Connecting devices. Flat quick-connect terminations for electrical copper conductors. Safety requirements
| Obsolete |
GB 17196-1997
|
PDF similar to GB/T 17196-2017
Basic data | Standard ID | GB/T 17196-2017 (GB/T17196-2017) | | Description (Translated English) | Connecting devices -- Flat quick-connect terminations for electrical copper conductors -- Safety requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K30 | | Classification of International Standard | 29.120.20 | | Word Count Estimation | 26,261 | | Date of Issue | 2017-12-29 | | Date of Implementation | 2018-07-01 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 17196-2017: Connecting devices -- Flat quick-connect terminations for electrical copper conductors -- Safety requirements
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
ICS 29.120.20
K30
National Standards of People's Republic of China
Replacing GB/T 17196-1997
Connecting device connected to the copper wire flat quickly
Connect the terminal safety requirements
(IEC 61210..2010, MOD)
2017-12-29 Posted
2018-07-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 main features 2
5 logo and information 2
6 structural requirements 3
7 General description of the test 5
8 type test 6
Appendix A (Informative) Maximum allowable temperature (maximum temperature) 14
Appendix B (Informative) Measuring tool for measuring the force of the flat quick connection socket
Appendix C (informative) Test insert for integral inserts 19
Appendix D (informative) on the conductor cross-sectional area and insert size information 21
Figure 1 Insert size 10
Figure 2 circular pits lock size 11
Figure 3 rectangular pits lock size 11
Figure 4 hole lock size 11
Figure 5 Sleeve size 12
Figure 6 double-headed insert 12
Figure 7 thermocouple position 13
Figure 8 Electrical Test Connection 13
Figure B.1 Dynamometer Equipment 15
Figure B.2 Fixture Adjustment 16
Figure B.3 fixed test card center 16
Figure B.4 Linear and Flange Inserts
Figure B.5 Fixed Adjustment 18
Figure C.1 Insert size 19
Figure C.2 Size of Inserts for Alternative Design 19
Table 1 Insert size 3
Table 2 Insert size 4
Table 3 test sequence and sample group 5
Table 4 Test Insert thickness deviation 6
Table 5 Insertion force and pull-out force 7
Table 6 Retention 7
Table 7 temperature rise test test current 8
Table 8 Test current of periodic current-carrying test 8
Table 9 crimping part of the test tension 9
Table A.1 Maximum allowable temperature (maximum operating temperature) 14
Table C.1 sleeve size requirements 19
Table C.2 Optional design of the sleeve size requirements 20
Table D.1 wire and plug the relationship between 21
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 17196-1997 "connecting devices connected to the copper wire with flat quick connector security requirements", and
GB/T 17196-1997 compared to the main technical changes are as follows.
--- Chapter 1 Note 1, the connecting wire is modified from "wire other than aluminum wire" to "wire other than copper wire";
--- Chapter 1 removed the "standard does not apply to data circuits and signal circuits with flat quick connector";
--- The second chapter removed the reference standard IEC 60760. 1989;
--- Deleted GB/T 17196-1997 Chapter 4, while the chapter order was adjusted, as follows. The original Chapter 5 to 7
Chapter, the original Chapter 6 to Chapter 4, the original Chapter 7 to Chapter 5, the original Chapter 8 to Chapter 6, the original Chapter 9 to Chapter 8;
The order of the forms has been adjusted in the order of chapters;
--- Increase in the appropriate table 0.2mm2, 0.34mm2 corresponding to the test requirements;
--- 4.1 The end of the first group by the "nominal width of the packet grouping" to "according to the nominal width of the insert and the thickness is divided into different
size";
--- 4.2, the priority wire cross-sectional area increased by 0.2mm2, 0.34mm2;
--- Remove the North American AWG wire gauge corresponding form;
--- Added information appendix B;
--- Increased information appendix C;
--- Added information appendix D.
This standard uses the redrafted law to amend the use of IEC 61210..2010 "connecting device connected to the copper wire flat quick connector
Safety requirements. "
This standard and IEC 61210..2010 technical differences and the reasons are as follows.
--- On normative references, this standard made a technical difference with the adjustment to adapt to China's technical conditions, adjust the situation
Concentration reflected in the second chapter "Normative references", the specific adjustments are as follows.
● Equivalent to the international standard GB/T 9797-2005 replaced by ISO 1456..2009;
● Replaced ISO 2093. 1986 with International Standard GB/T 12599-2002 modified;
● Replace IEC 60352-2..2006 with GB/T 18290.2-2000 equivalent to the international standard.
--- In order to facilitate the test operation, 8.6 increased the wire and crimp part of the displacement of not more than 2mm requirements.
This standard made the following editorial changes.
--- According to the relevant provisions of GB/T 1.1, in Chapter 1, "Scope" added "This standard specifies the flat copper wire connection
The main characteristics of connecting terminals, signs and information, structure, mechanical properties, electrical performance and other technical requirements ";
--- Because of China's use of the SI system, this standard deleted IEC 61210..2010 in inch, North American AWG wire gauge phase
The relevant provisions, such as IEC 61210..2010 Note 5,4.1 Note 4.2 Note, 5.3 Note 4,6.3 Note 2,6.4 Note 8.1
Note 1 and note 3, note 8, note 8, Note 8.3, note 8.5, Note 3, note 8.6, and appendix D.
This standard proposed by the China Electrical Equipment Industry Association.
This standard by the National Electrical Accessories Standardization Technical Committee (SAC/TC67) centralized.
This standard was drafted. Wei Kai Detection Technology Co., Ltd., Fei Li Fu Technology Co., Ltd., Hefei Midea Refrigerator Co., Ltd., Zhejiang
Jiangzhengtai Construction Electric Co., Ltd., Bulls Group Co., Ltd., China Electric Apparatus Research Institute Co., Ltd., Yuehua Holdings Group Co., Ltd.,
Nepalese Electric (Jiaxing) Co., Ltd., Shunde District of Foshan City Huangzhong Electric Co., Ltd., Suzhou Jiantong Optoelectronics Terminal Co., Ltd., Shenzhen Li Gannian even
Connector Co., Ltd.
The main drafters of this standard. Lv Guowei, Zhou Yi, Yu Qing, Liu Yuanfang, Ruan Liping, Cai Jun, Wang Zhansheng, Zhang Lirong, Cao Fengxian, Shi Qingzhong,
Gao Weixiong, Hong Zhijing, Luo Deyuan, Xu Mengqi, Liu Hongfei, Cai Yingfeng, Luo Shiming.
This standard replaces the standards previously issued as follows.
--- GB/T 17196-1997.
Connecting device connected to the copper wire flat quickly
Connect the terminal safety requirements
1 Scope
This standard specifies the main features, signs and data, structure, mechanical properties, electrical properties of the flat quick connect terminal for connecting copper conductors
Can, test and other technical requirements. This standard developed a uniform size, performance and test plan requirements.
This standard applies to non-insulated flat quick connect terminal, this terminal consists of a hole with a micro-concave latch buckle insert and a
Sleeve set of sleeve, as a device or component of the embedded components or monolithic components, or as a separate unit, the tab width of the nominal
2.8mm, 4.8mm, 6.3mm or 9.5mm.
The copper wire to which it is connected may be a soft wire or a hard stranded wire having a cross-sectional area of not more than 6 mm 2, or a cross-sectional area
Over 2.5mm2 hard single core wire. This standard does not apply to the end of the connecting aluminum wire connector.
These ends of the AC rated voltage does not exceed 1000V, the frequency does not exceed 1000Hz, or its DC rated voltage does not exceed 1500V;
The temperature limits meet the requirements of the materials used within the scope of this standard.
Note 1. If necessary, the ends of this standard may be used to connect wires made of materials other than copper.
Note 2. For safety, do not interchange non-standard flat quick connect terminals other than those in this standard with the scope of this standard.
Note 3. This standard does not apply to the sleeve with a positive locking mechanism.
Note 4. The flat quick-connect terminal within the scope of this standard is not by pulling the cable to disconnect the terminal.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 2421.1-2008 Environmental testing for electric and electronic products Overview and Guidelines (IEC 60068-1. 1988, IDT)
GB/T 9797-2005 Metallic coatings Nickel-chromium and copper-nickel-chromium plating (ISO 1456..2003, IDT)
GB/T 9799-2011 Metals and other inorganic coatings Steel zinc treated zinc plating (ISO 2081..2008, IDT)
GB/T 12599-2002 Metallic coatings Tin plating technical specifications and test methods (ISO 2093. 1986, MOD)
GB/T 18290.2-2000 Solderless connections - Part 2. Solderless crimp connections - General requirements, test methods and guidelines for use
(IEC 60352-2..1996, IDT)
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
Flat quick connect terminal flatquick-connecttermination
An electrical connector consisting of a tab and a socket can be inserted and removed with or without tools.
3.2
Insert maletab
Quick connect the end of the plug with the sleeve inserted part.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17196-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 17196-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 17196-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17196-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 17196-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17196-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|