|
US$439.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 16769-2008: Metal-cutting machine tools -- Measurement method of sound pressure level
Status: Obsolete GB/T 16769: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 16769-2008 | English | 439 |
Add to Cart
|
3 days [Need to translate]
|
Metal-cutting machine tools -- Measurement method of sound pressure level
| Obsolete |
GB/T 16769-2008
|
| GB/T 16769-1997 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Metal-cutting machine tools--Measurement method of sound pressure level
| Obsolete |
GB/T 16769-1997
|
PDF similar to GB/T 16769-2008
Basic data | Standard ID | GB/T 16769-2008 (GB/T16769-2008) | | Description (Translated English) | Metal-cutting machine tools -- Measurement method of sound pressure level | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J50 | | Classification of International Standard | 25.080.01 | | Word Count Estimation | 11,119 | | Date of Issue | 2008-08-11 | | Date of Implementation | 2009-02-01 | | Older Standard (superseded by this standard) | GB/T 16769-1997 | | Quoted Standard | GB/T 3785-1983 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the terms and definitions metal cutting machine noise level measurements, measuring instruments, measurement conditions, measurement methods, data processing, data recording and evaluation principles. This standard applies to metal cutting machine tools (hereinafter referred to as the machine) the noise level (hereinafter referred to as noise) measurements. | GB/T 16769-2008: Metal-cutting machine tools -- Measurement method of sound pressure level---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metal-cutting machine tools. Measurement method of sound pressure level
ICS 25.080.01
J50
National Standards of People's Republic of China
Replacing GB/T 16769-1997
Metal-cutting machine noise level measurements
Posted 2008-08-11
2009-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard replaces GB/T 16769-1997 "metal cutting machine noise level measurement method."
This standard and GB/T 16769-1997 compared to the main changes are as follows.
--- Chapter 1, "Scope", delete the words "operating condition", adding "assessment principle" (1997 edition Chapter 1, Chapter 1 of this edition);
--- Chapter 2, "Normative references" to "normative references" (1997 edition, Chapter 2, Section 2 of this edition);
--- Chapter 3, "definition" to "Terms and Definitions." Increase the "noise source", "noise", "noise emission", "emission sound pressure", "launch
SPL "," working position, the operator position "," operator "," predetermined position "terms and definitions, the abolition of the term" sound pressure ", repair
Changed "SPL", the definition of "background noise" (the 1997 version of Chapter 3, Section 3 of this edition);
--- Chapter 5 Cancellation 5.3, which is incorporated as Chapter 7, "7.1 Machine noise value," adds noise measurement results invalid
Processing, the "Found" to "measured value" and added, "Note 1" and "Note 2." Table 1 heading "affected by background noise
Correction value "to" fix "the machine noise measurements. Table 1 content has been amended and supplemented (1997 Edition Chapter 5, this
Chapter 7 edition);
--- The Chapter 5 as "5.1 Basic Conditions", and make appropriate changes and additions (1997 Edition Chapter 5, the first edition
Chapter 5);
--- Chapter 6 cancel the heading "operating conditions", 6.4 as 5.1.6, the remainder as "Noise Measure 5.2" and "5.3 workers
For noise measurement ", and make appropriate changes and additions. 5.2.1 adds after" note "(1997 edition, Chapter 6, Excerpts
Chapter 5);
--- Chapter 7 to Chapter 6, and rearrange. 7.2 and 7.3 as a combined "6.1.3 measurement point distance", the contents are
Metal-cutting machine noise level measurements
1 Scope
This standard specifies the terms and definitions of metal-cutting machine noise level measurements, measuring instruments, measurement conditions, measurement methods, data at
Management, data recording and evaluation principles.
This standard applies to metal cutting machine tools (hereinafter referred to as the machine) of the noise level (hereinafter referred to as noise) measurements.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 3785-1983 electric sound level meter, acoustic performance and test methods
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.1
Active or passive acoustic emission objects.
3.2
Noise generated by the sound source. Sound waves emitted by the noise source in the medium of sound pressure changes generated by the sound pressure level to be measured.
3.3
Under specified operating and installation conditions, by a given sound source (test machine) emitted airborne sound.
Note. The noise emission values \u200b\u200bcan be contained in the product label or product description. The basic noise emission working position itself close to the sound source sound power level and the sound source
Or other emission sound pressure levels specified location.
3.4
On a reflective surface (such as. the ground), in accordance with the provisions of installation and operating conditions sound pressure specified position near the sound source work.
It does not include background noise and reflections than testing allowed other reflecting surfaces of the reflecting surface, in units of Pa [ska] (Pa).
3.5
LP
Formula (1). Using the time weighting and frequency weighting GB/T 3785 provisions were measured in decibels (dB). The reference sound pressure P0
20μPa.
LP = 10lg
P20
(1)
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 16769-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 16769-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 16769-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 16769-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 16769-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 16769-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|