|
US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1630.1-2008: Plastics -- Epoxy resins -- Part 1: Designation
Status: Valid GB/T 1630.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 1630.1-2008 | English | 114 |
Add to Cart
|
3 days [Need to translate]
|
Plastics -- Epoxy resins -- Part 1: Designation
| Valid |
GB/T 1630.1-2008
|
| GB/T 1630-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Epoxide resins--Designation
| Obsolete |
GB/T 1630-1989
|
PDF similar to GB/T 1630.1-2008
Basic data | Standard ID | GB/T 1630.1-2008 (GB/T1630.1-2008) | | Description (Translated English) | Plastics -- Epoxy resins -- Part 1: Designation | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | G31 | | Classification of International Standard | 83.080.10 | | Word Count Estimation | 6,636 | | Date of Issue | 2008-08-04 | | Date of Implementation | 2009-04-01 | | Older Standard (superseded by this standard) | GB/T 1630-1989 | | Adopted Standard | ISO 3673-1-1996, IDT | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the epoxy naming. The naming method gives a set of characters for each product name, and product information given in the form code: Chemical composition, major performance approximation and modifiers, solvents, additives. Thus, with the same characteristics and have the same purpose products will be given the same name. This will help the user to select a product manufacturer in its product naming data tables. | GB/T 1630.1-2008: Plastics -- Epoxy resins -- Part 1: Designation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics Epoxy resins Part 1. Designation
ICS 83.080.10
G31
National Standards of People's Republic of China
GB/T 1630.1-2008/ISO 3673-1.1996
Replacing GB/T 1630-1989
Plastics - Epoxy resins
Part 1. Designation
(ISO 3673-1.1996, IDT)
Posted 2008-08-04
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 1630 "plastic epoxy resin" is divided into two parts.
--- Part 1. Designation;
--- Part 2. Preparation and properties of the specimen was measured.
This section GB/T 1630 Part 1, identical with ISO 3673-1.1996 "Plastics Epoxy --- --- Part 1.
Named "(in English).
This section is equivalent translation ISO 3673-1.1996, identical in technical content.
For ease of use, this section made the following editorial changes.
--- The "ISO 3673.1996 this part" to "GB/T 1630 this part" or "this part";
--- Remove the ISO 3673-1.1996 Foreword;
--- Increased our standard preface this section;
--- Use of decimal symbol instead of the international standard decimal symbol ",". ",";
--- For ISO 3673-1.1996 and other international standards referenced in our country is equivalent to using the standard, this section with a quote me
These national standards for the country instead of the corresponding international standards, and the rest not tantamount to the adoption of a standard for the international standards in this section
It was in direct reference.
This Part replaces GB/T 1630-1989 "epoxy name."
This section compared with GB/T 1630-1989 The main changes are as follows.
--- Change the standard name, increasing the foreword;
--- Part reference standards vary.
This part is proposed by the China Petroleum and Chemical Industry Association.
This part of the National Plastics Standardization Technical Committee (SAC/TC15) centralized.
This section is responsible for drafting. National Quality Supervision and Inspection Center of synthetic resin.
Participated in the drafting of this section. Bluestar New Chemical Materials Co., Ltd. Wuxi Resin Factory, Anhui Hengyuan Chemical Co., Ltd.
The main drafters of this section. Wangyong Gui, Zhao Ping, ranking YEN YIN, Cheng Zhen Shuo.
This part of the standard replaces the previous editions are.
--- GB 1630-1979; GB/T 1630-1989.
GB/T 1630.1-2008/ISO 3673-1.1996
Plastics - Epoxy resins
Part 1. Designation
1 Scope
GB/T 1630 provisions of this part epoxy naming method.
The nomenclature assigned to a group of characters for each product name, and the code given in the form of product information. Chemical composition, the main performance
Approximation and modifiers, solvents, additives.
Therefore, having the same characteristics and have the same purpose products will be given the same name. This will help users of their products at factory
Name the data table selected products.
2 Normative references
The following documents contain provisions which, through reference to GB/T 1630 to the present, constitute provisions of this section. For dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
GB /1033.1-2008 plastic foam density non-Determination T - Part 1. Immersion method, liquid pyknometer method and titration
Method (ISO 1183-1.2004, IDT)
GB/T 15223-2008 liquid plastic resin density was measured using a pycnometer method (ISO 1675. 1985, IDT)
GB/T 21059-2007 plastic liquid state or as emulsions or dispersions of polymer/resin using a rotary viscometer with defined shear rate
Rate lower viscosity measurement (ISO 3219.1993, IDT)
Determination of plastic --- 1999 --- epoxy equivalent of the epoxy compound. ISO 3001
3 naming
Epoxy should be a method name, using the abbreviation code "EP" represents an epoxy compound, followed by five digits (equivalent to the main performance)
Character set, a space, followed by three digits (equivalent to minor performance) group of characters.
--- In addition to the two digits corresponding to the one led by properties, each digit corresponding to certain characteristics listed in Table 1.
--- The position of each character in the group number (Ⅰ, Ⅱ, Ⅲ and Ⅳ, etc.) represents the performance of the position referred to.
--- Each digital representation of the performance of a range of values \u200b\u200bshould be a performance class (1,2,3, etc.), as shown in Table 1.
Note 1. In fact, not all of the performance ranking combination can be achieved, except occasionally, we must also note the naming of a material not necessarily correspond with the rampage.
Note 2. The location should be considered in the naming category Ⅲ, Ⅳ and Ⅵ value of each performance in which the values \u200b\u200blisted in the data table is the average obtained from the production.
Due to changes in production conditions, determine the category of the product due to changes in a change in behavior of the system, in some cases.
--- If the average value of a property close to the lower limit of the named category, should be adjusted to a lower category;
--- If the average value of a property close to the upper limit of the higher category name, then adjust it to a higher category.
4 epoxy naming
By naming Chapter 3, wherein the epoxy resin by a group of five numeric characters Group subsequently received a set of three-digit character set
To name, a space between the two groups of characters.
The first group of five numbers indicate the main performance, 3 digits secondary performance.
If one kind of performance (usually labeled a digital level specified) unspecified, then the lowercase "x" is inserted in the appropriate name
position.
GB/T 1630.1-2008/ISO 3673-1.1996
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 1630.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 1630.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 1630.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 1630.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 1630.1-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1630.1-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|