|
US$699.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15766.2-2016: Lamps for road vehicles -- Performance requirements
Status: Valid GB/T 15766.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15766.2-2016 | English | 699 |
Add to Cart
|
6 days [Need to translate]
|
Lamps for road vehicles -- Performance requirements
| Valid |
GB/T 15766.2-2016
|
| GB/T 15766.2-2007 | English | RFQ |
ASK
|
4 days [Need to translate]
|
Lamps for road vehicles -- Performance requirements
| Obsolete |
GB/T 15766.2-2007
|
| GB/T 15766.2-2000 | English | 879 |
Add to Cart
|
4 days [Need to translate]
|
Filament lamp performance requirements for road vehicles
| Obsolete |
GB/T 15766.2-2000
|
| GB/T 15766.2-1995 | English | 639 |
Add to Cart
|
5 days [Need to translate]
|
Lamps for road vehicles. Performance requirements
| Obsolete |
GB/T 15766.2-1995
|
PDF similar to GB/T 15766.2-2016
Basic data | Standard ID | GB/T 15766.2-2016 (GB/T15766.2-2016) | | Description (Translated English) | Lamps for road vehicles -- Performance requirements | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | K71 | | Classification of International Standard | 29.140.20 | | Word Count Estimation | 35,312 | | Date of Issue | 4/25/2016 | | Date of Implementation | 2016-11-01 | | Older Standard (superseded by this standard) | GB/T 15766.2-2007 | | Quoted Standard | GB/T 2423.10-2008; GB/T 2900.65-2004; IEC 60068-2-47-1999; IEC 60410-1973; IEC 60809-2012; ISO 5344-1980 | | Adopted Standard | IEC 60810-2013, MOD | | Regulation (derived from) | National Standard Announcement No | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard applies to replaceable bulbs (filament bulbs and discharge lamps) used in road motor vehicle headlamps, fog lamps and signal lamps. Particularly suitable for the bulb listed in IEC 60809. This standard also applies to other bulbs within the scope of this standard. This standard specifies the lamp life, luminous maintenance rate, torsion strength, glass bulb strength and resistance to vibration and shock performance requirements and test methods. In addition, the temperature limits, the maximum bulb outline and the maximum allowable voltage impact are specified as a guide to the design of lighting and electrical installations. For some of the requirements given in this standard, refer to the data in the tables of this standard. For bulbs not listed in the table, the relevant data is provided by the manufacturer of the lamp and the responsible seller. These performance requirements are for IEC | GB/T 15766.2-2016: Lamps for road vehicles -- Performance requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lamps for road vehicles - Performance requirements
ICS 29.140.20
K71
National Standards of People's Republic of China
Replace GB/T 15766.2-2007
Road motor vehicle light bulb performance requirements
(IEC 60810..2013, MOD)
2016-04-25 released
2016-11-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China
China National Standardization Management Committee released
Directory
Preface III
1 Scope 1
2 normative reference document 1
3 Terms and definitions 1
4 filament lamp requirements and test conditions 2
4.1 Basic performance and interchangeability 2
4.2 Torque strength 3
4.3 Characteristic Life T 3
4.4 Life B3 3
4.5 luminous flux maintenance rate 3
4.6 Vibration and shock resistance 3
4.7 Bulb strength 4
5 filament lamp data 4
6 Requirements and test conditions for discharge bulbs 5
6.1 Basic performance and interchangeability 5
6.2 Mechanical strength 6
6.3 Characteristic life T 6
6.4 Life B3 6
6.5 luminous flux maintenance rate 6
6.6 Resistance to vibration and shock 6
6.7 Start-up unit Discharge lamp 6
Appendix A (Normative Appendix) Filament Lamp Life Test Conditions 7
Appendix B (Normative Appendix) Vibration Test 9
Appendix C (Normative Appendix) Bulb Strength Test 13
Appendix D (normative) Discharge lamp life and luminous flux maintenance test conditions
Appendix E (Normative Appendix) Bulb Offset Test 18
Appendix F (informative) Lighting device design guide 19
Appendix G (informative) Ballast Design Information
Appendix H (informative) symbol 27
Reference 29
Figure B.1 Recommended vibration test device Figure 12
Figure C.1 Test equipment schematic 13
Figure E.1 Schematic diagram of the test device
Figure F.1 12V filament lamp voltage impulse voltage impact of the longest allowable duration and voltage impact of the relationship between the level of high and low
Figure F.2 Maximum filament of the H1 filament lamp
Figure F.3 Maximum filament of H2 filament lamp
Figure F.4 H3 filament bulb maximum profile 23
Figure F.5 Maximum outline of the P21W, PY21W, P21/4W and P21/5W filament bulbs 24
Table 1 Qualified conditions for life B3 3
Table 2 Qualified conditions for vibration test 4
Table 3 rated life of continuous work 4
Table 4 Rated luminous flux maintenance for continuous operation 5
Table B.1 Road motor vehicle bulb vibration test standard test conditions 11
Table B.2 Road motor vehicle bulb vibration test overload test conditions 11
Table B.3 Road motor vehicle bulb vibration test standard test conditions 12
Table C.1 Compressive strength 14
Table C.2 Biometrics based on the characteristics of the sampling program 14
Table C.3 "S" method based on variable test evaluation
Foreword
GB/T 15766 "Road motor vehicle light bulb" is divided into two parts.
- Part 1. Dimensions, optoelectronic performance requirements;
- Part 2. Performance requirements.
This part is part 2 of GB/T 15766.
This part is drafted in accordance with the rules given in GB/T 1.1-2009.
This part replaces GB/T 15766.2-2007 "Road motor vehicle filament lamp performance requirements".
This part compared with GB/T 15766.2-2007, the main technical content changes as follows.
--- "The satisfactory operation of the lamp" in "3.7 and 3.8" is changed to "the performance of the lamp meets the requirements" (see 3.7 and 3. 8,.2007)
Of 3.7 and 3.8);
- "Satisfaction" of "4.6 and 6.6 and B.1" was replaced by "satisfactory" (see 4.6, 6.6 and B.1, pages 4.6, 6.6 and B.1);
- "Use" in the title of "F.5 and F.6" is changed to "Use and processing" and F.5 is added "You can use Appendix H (H.2 ~
H.10) as additional information or as a substitute for text information ", F.6 added" You can also use the appendix
H (H.2 ~ H.10) as additional information, or as an alternative to textual information "(see F.5 and F.6,.2007
F.5 and F.6);
- Added Appendix H (see Appendix H).
This part uses the re-drafting method to modify IEC 60810..2013 (version 3.2) "Road motor vehicle light bulb performance requirements".
This section has structural changes as compared to IEC 60810..2013.
--- modify 5.1 as paragraph;
The "note" in Table 3 is modified as paragraph;
--- "Note 1" in Table 4 is changed to paragraph, and "Note 2" is changed to "Note".
The technical differences between this section and IEC 60810..2013 are as follows.
--- on the normative reference documents, this part has made a technical differences in the adjustment to meet China's technical conditions, adjust the situation
The situation is reflected in Chapter 2, "Normative references", as follows.
Replace GB 60050 (845) with the GB/T 2900.65-2004 with international standard. 1987, GB/T 2900.65-
2004 is fully consistent with Section 845 of IEC 60050 (see Chapters 1 and 3);
Replace IEC 60068-2-6..1995 (see B.1) with GB/T 2423.10-2008 equivalent to the international standard;
--- LED light source in the automotive application is in a rapid development stage, the technology is not yet mature, the international standard changes are faster,
Not suitable for conversion to national standards. In addition GB 15766.2 and GB 15766.1 (refer to IEC 60809) supporting the use of, in
The current GB 15766.1 does not have the LED light source model loose-leaf, so GB 15766.2 should not contain LED related
content. Removed IEC 60810..2013 LED related content, the specific contents are as follows.
● Note 1 in Note 1, Note 3;
• Chapter 2 IEC 60061-1, IEC 60068-2-14, CISPR25 and UN/ECERegulationNo.128;
● Note 3 of 3.4 in Chapter 3, 3.11 to 3.15;
Chapter 7;
● Appendix I.
In this part of the normative reference to the international documents have a consistent correspondence between the following documents.
Environmental testing for electric and electronic products - Part 2. Test methods - Vibration, shock and the like - GB/T 2423.43-2008.
Installation of mechanical test samples (IEC 60068-2-47..2005, IDT)
Electric shock generation system (equipment) Performance characteristics (ISO 5344..2004, IDT) GB/T 7670-2009
Road vehicles - Bulb dimensions, optoelectronic performance requirements (IEC 60809..2004, NEQ) GB 15766.1-2008.
This part is made by the China Light Industry Federation.
This part of the National Lighting Standardization Technical Committee (SAC/TC224) centralized.
This part of the drafting unit. Foshan Electric Lighting Co., Ltd., Philips (China) Investment Co., Ltd., Beijing Electric Light Source Research Institute.
This part of the main drafters. Wei Bin, Wu Ping, Duan Yanfang, Zheng Yanfeng, Zhao Xiurong.
This part of the previous version of the standard to replace the release of the situation.
GB/T 15766.2-1995, GB/T 15766.2-2000, GB/T 15766.2-2007.
Road motor vehicle light bulb performance requirements
1 Scope
This part of GB/T 15766 applies to replaceable bulbs used in road motor vehicle headlamps, fog lamps and semaphores (filament bulbs
And discharge lights). Particularly applicable to the lamps listed in IEC 60809. This part also applies to other bulbs that fall within this section.
This part specifies the requirements and test methods for lamp life, luminous flux maintenance, torque strength, glass bulb strength and vibration and shock resistance.
law. In addition, the temperature limit, the maximum profile of the bulb and the maximum allowable voltage shock are given, as a design for lighting and electrical installations
guide.
For some of the requirements given in this section, refer to the data in the tables in this section. For the bulbs not listed in the table, the relevant data is made up of
Lamp manufacturer and distributor of responsibility.
These performance requirements are complementary to the basic requirements of IEC 60809. However, these performance requirements are not used by authorities
The type of product approved for the purpose.
Note 1. In different vocabularies and standards, different terms are used for "incandescentlamps" (GB/T 2900.65-2004 845-07-
04) and "dischargegelamp" (GB/T 2900.65 845-07-17). In this section, use the "filament lamp" (filament
lamp and "dischargegelamp". However, when writing only "lamp", only the two types of light bulbs are used, unless the context
Explain the light bulb used to represent another category.
Note 2. This part does not apply to luminaires.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 2423.10-2008 Environmental testing for electric and electronic products - Part 2. Test methods - Test Fc. Vibration (sinusoidal)
(IEC 60068-2-6..1995, IDT)
GB/T 2900.65-2004 Electrical terminology lighting [IEC 60050 (845). 1987, MOD]
Environmental testing for electric and electronic products - Part 2-47. Test methods - Vibration, shock and similar power - IEC 60068-2-47..1999
Test the installation of the test sample (Environmentaltesting-Part 2-47. Testmethods-Mountingofcomponents,
equipmentandotherarticlesforvibration, impactandsimilardynamictests)
IEC 60410. 1973 Sampling programs and procedures for performance testing (Samplingplansandproceduresforinspectionby
attributes
IEC 60809..2012 Road motor vehicle bulb size, photoelectric performance requirements (Lampsforroadvehicles-Dimen-
sional, electricalandluminousrequirements
ISO 5344. 1980 Electric test equipment capable of generating vibrations - Device characterization method (Electrodynamictest
equipmentforgeneratingvibration-Methodsofdescribingequipmentcharacteristics)
3 terms and definitions
GB/T 2900.65-2004 and IEC 60809 and the following terms and definitions apply to this document.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15766.2-2016_English be delivered?Answer: Upon your order, we will start to translate GB/T 15766.2-2016_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15766.2-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15766.2-2016_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15766.2-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15766.2-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|