|
US$579.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15472-2012: General specification for distortion measure instrument
Status: Valid GB/T 15472: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15472-2012 | English | 579 |
Add to Cart
|
5 days [Need to translate]
|
General specification for distortion measure instrument
| Valid |
GB/T 15472-2012
|
| GB/T 15472-1995 | English | RFQ |
ASK
|
9 days [Need to translate]
|
Generic specification and test method for distortion meters
| Obsolete |
GB/T 15472-1995
|
PDF similar to GB/T 15472-2012
Basic data | Standard ID | GB/T 15472-2012 (GB/T15472-2012) | | Description (Translated English) | General specification for distortion measure instrument | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L85 | | Classification of International Standard | 17.220 | | Word Count Estimation | 25,267 | | Older Standard (superseded by this standard) | GB/T 15472-1995 | | Quoted Standard | GB/T 191; GB/T 3047.6; GB/T 6587-2012; GB/T 11463-1989; GB/T 18268.1 | | Regulation (derived from) | National Standards Bulletin No. 41 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the distortion measuring instrument (hereinafter referred to as distortion meter) terminology, product classification, requirements, test methods, inspection rules, marking, packaging, transport and storage. This standard applies t | GB/T 15472-2012: General specification for distortion measure instrument---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS17.220
L85
National Standards of People's Republic of China
Replacing GB/T 15472-1995
Distortion meter general specification
Issued on. 2013-06-01 2012-12-31 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Product Category 3
5 Requirements 4
6 Test methods 7
7 Inspection rules 15
8 signs, packaging, transportation and storage 20
Foreword
This standard rule according to GB/T 1.1-2009 given draft.
This standard replaces GB/T 15472-1995 "distortion measurement instruments General technical requirements."
This standard and GB/T 15472-1995 compared to the main changes are as follows.
--- Increasing the digital display error calculation method for the measurement results (see 6.3.1.2, 6.3.2.2).
--- Interface functions have increased the degree of distortion meter corresponding technical provisions and test methods (see 5.2.3, 6.3.3).
The standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard by the National Standardization Technical Committee Electronic Measuring Instruments (SAC/TC153) centralized.
This standard was drafted. Chengdu Qianfeng Electronics Instrument Factory.
The main drafters of this standard. Chen Lu onwards, Feng Wensheng, Linhuai Xi.
This standard superseded standard previously issued as follows.
--- GB/T 15472-1995.
Distortion meter general specification
1 Scope
This standard specifies the distortion meter (hereinafter referred to as distortion meter) terms, product classifications, requirements, test methods, inspection rules, marking,
Packaging, transportation and storage.
This standard applies to harmonic distortion measurement instruments, as product design, the technical basis for the identification, production, use, testing, and also the development of distortion
Instrument product standards basis.
This standard also applies to low-voltage integrated measurement devices and harmonic distortion measurement unit.
This standard does not apply to non-linear intermodulation distortion and transient distortion meter measuring instrument.
2 Normative references
The following documents for the application of this document is essential, dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 191 Packing Pictorial marking
GB/T 3047.6 desktop chassis electronics Series of basic dimensions
GB/T 6587-2012 General specification for electronic measuring instruments
GB/T 11463-1989 electronic measuring instrument reliability test
Part 1 Electrical equipment compatibility requirements GB/T 18268.1 measurement, control and laboratory use. General requirements
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Fundamental fundamental
Non-sinusoidal periodic signal converted by Fourier series analysis, which is composed of a plurality of different amplitudes, different frequencies of the sinusoidal signal consisting of
Of which the non-sinusoidal signal with the same frequency signal called the fundamental signal, its frequency is called the fundamental frequency.
3.2
Harmonic harmonic
Non-sinusoidal periodic signal by Fourier transform analysis series, which is composed of the fundamental signal and a number of different amplitude and frequency of the fundamental frequency
An integer multiple of the sine wave signal component. The latter are called harmonic signal having a frequency are called harmonic frequencies.
3.3
Amplitude-frequency distortion amplitude-frequencydistortion
Non-sinusoidal signal after transmission network, since the network is non-sinusoidal signal fundamental component and harmonic components have unequal
Gain response, thus the output signal waveform change, this change is called linear waveform amplitude-frequency distortion.
3.4
Frequency phase distortion phase-frequencydistortion
Non-sinusoidal signal after transmission network, since the network is non-sinusoidal signal fundamental component and harmonic components have different
The phase delay (lead or lag), so that the output signal waveform change, this change is called linear phase-frequency waveform distortion.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15472-2012_English be delivered?Answer: Upon your order, we will start to translate GB/T 15472-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15472-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15472-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15472-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15472-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|