|
US$1229.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15406-2007: Primary parameter and general specification for geotechnical engineering instrument
Status: Valid GB/T 15406: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15406-2007 | English | 1229 |
Add to Cart
|
7 days [Need to translate]
|
Primary parameter and general specification for geotechnical engineering instrument
| Valid |
GB/T 15406-2007
|
| GB/T 15406-1994 | English | 679 |
Add to Cart
|
5 days [Need to translate]
|
Primary parameters and general technical specifications for geotechnical apparatus
| Obsolete |
GB/T 15406-1994
|
PDF similar to GB/T 15406-2007
Basic data | Standard ID | GB/T 15406-2007 (GB/T15406-2007) | | Description (Translated English) | Primary parameter and general specification for geotechnical engineering instrument | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | P10 | | Classification of International Standard | 07.060 | | Word Count Estimation | 49,412 | | Date of Issue | 2007-06-11 | | Date of Implementation | 2007-09-01 | | Older Standard (superseded by this standard) | GB/T 15406-1994 | | Quoted Standard | GB/T 9359; GB 9969.1 | | Regulation (derived from) | National Standard Announcement 2007 No.7 (Total No.107) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the geotechnical instrumentation product categories, basic parameters and general technical conditions, test methods, inspection rules, and packaging, signs, transport, storage and so on. This standard applies to geotechnical instrumentation product development, design, production and use. This standard does not apply to the earthquake, volume hydraulics and environmental monitoring equipment. | GB/T 15406-2007: Primary parameter and general specification for geotechnical engineering instrument
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Primary parameter and general specification for geotechnical engineering instrument
ICS 07.060
P10
National Standards of People's Republic of China
Replacing GB/T 15406-1994
Geotechnical engineering instrument basic parameters and general technical conditions
Posted 2007-06-11
2007-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Introduction Ⅲ
Introduction Ⅳ
1 Scope 1
2 Normative references 1
3 Terms and definitions
4 Product Category 1
4.1 Classification of soil test equipment 1
4.2 Classification of dam safety monitoring (observation) of the instrument 1
4.3 Classification of rock test (test) instrument 2
4.4 Other 2
Basic parameters 2 5
5.1 soil test equipment 2
5.2 dam monitoring (observation) instrument 7
5.3 Rock test (test) instrument 20
6 General technical requirements 25
6.1 General requirements 25
6.2 soil test equipment 26
6.3 dam monitoring (observation) instruments 28
6.4 Rock test (test) instrument 29
7 Test Method 36
7.1 General 36
7.2 soil test equipment 36
7.3 dam monitoring (observation) instruments 37
Test methods 7.4 Receiving Automation Instrumentation Acquisition 37
7.5 Rock test (test) instrument 37
37 8 Inspection Rules
8.1 factory inspection 37
37 8.2 Type inspection
9 logo, Operating Instructions 38
9.1 identifies 38
9.2 User's Guide 39
10 packaging, transportation and storage 39
39 10.1 Packaging
10.2 Transport 39
10.3 Storage 39
Appendix A (informative) related to the basic parameters of the instrument 40
A. 1 direct shear apparatus 40
A. 2 triaxial apparatus 40
A. 3 meter spherical stamper 40
A. 4 side pressure meter 41
A. 5 velocity detector 41
A. 6 wishbone settlement gauge 41
A. 7, as the dam collimator 41
A. 8 pairs of closed-pore water pressure gauge tube 41
A. 9 Pneumatic pore water pressure gauge 42
A. 10 42 pneumatic earth pressure
A. 11 pressure detector 42
A. 12 VW assembly line equipment box 42
A. 13 differential resistance instruments set line box 42
Foreword
This standard is GB/T 15406-1994 "geotechnical equipment basic parameters and general technical conditions" amendments and GB/T 15406-
Compared to 1994, the main changes are as follows.
--- Increasing the dam monitoring (observation) The instrument, rock test (test) equipment;
--- This standard geotechnical instrumentation measurement units and symbols of unity;
--- This standard original specified product categories, basic parameters, technical requirements and other relevant content to broaden and made the appropriate adjustment in the provision
Whole, and to be further clarified;
--- With the domestic geotechnical engineering equipment production technology, technological level and variety of electronic components, quality and other aspects of progress and improvement,
The common technical standard for environmental testing instrument Geotechnical Engineering Simulation factors also make the principles laid down.
Appendix A of this standard is the data appendix.
The standard proposed by the People's Republic of China Ministry of Water Resources.
This standard by the Department of International Cooperation, Science and Technology.
This standard is mainly drafted by. MWR hydrological instruments and geotechnical engineering Instrument Quality Supervision, Inspection and Testing Center, Nanjing Hydraulic Research
Hospital, Nanjing Automation Hydrological Institute, State Power Automation Research Institute, Nanjing Electric Power Automation Equipment Factory.
Participated in the drafting of this standard. national hydrological instruments and geotechnical engineering Instrument License Examination Department, Ministry of Water Resources Dam Safety Management Center, River
Lehigh University, Changjiang Water Resources Sciences, Nanjing Soil Instrument Co., Ltd.
Drafters of this standard. Miss Xu, a new chapter, Chen Yu, Guan Ping Hong, Lu Youqing, Xuguo Long, Shen province III.
Participate drafters of this standard. Shi Minghua, Xu Haifeng, Li Zechong, GU Chong, Li Lei, Zhang Dekang, Zhou Huo-ming, a Ning.
This standard replaces the standards previously issued as follows.
--- GB/T 15406-1994.
Introduction
Standardization of geotechnical instrumentation foundation is weak, product variety, low-volume, high precision is very prominent, because the product
Cross-industry, cross-professional applications and the complexity of market demand, making all kinds of soil test equipment, dam monitoring (observation) instruments and rock samples
Test (test) instrument is very diverse variety of products, which is measured in a number of specific terms of a dimensionless unit, terminology symbols, error calculation are
Extremely non-standard, therefore, the standard measurement instrument for geotechnical engineering units and symbols of a unified and standardized, general requirements should be consistent with national
The basic provisions of the relevant standards.
This standard is water, electricity, transportation, mining and port, civil and other industries widely used by the soil test equipment, dam monitoring (Concept
Test) the basic standard rock instrumentation and test (test) instrument which together constitute the three professional geotechnical instrumentation products.
Geotechnical engineering instrument basic parameters and general technical conditions
1 Scope
This standard specifies the geotechnical instrumentation product classification, basic parameters and general technical requirements, test methods, inspection rules and packaging,
Signs, transportation, storage and so on.
This standard applies to geotechnical engineering instrumentation product development, design, production and use.
This standard does not apply to the earthquake, hydraulics and environmental monitoring of the amount of equipment.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 9359 Basic environmental testing instruments hydrological conditions and methods
GB 9969.1 Instructions General Industrial Products
GB/T 15464 instrumentation packaging technology
GB/T 21029 geotechnical engineering Instrument Series spectrum
GB/T 50279-1998 Standard for fundamental terms of geotechnical engineering
SL268-2001 dam safety automatic monitoring system equipment basic technical conditions
3 Terms and Definitions
GB/T 50279-1998, terms and definitions established SL268-2001 apply to this standard.
4 Products
4.1 Classification of soil test equipment
Soil test equipment into laboratory test equipment and in situ tests (test) instrument.
4.1.1 The laboratory test instrument
Laboratory test instrument divided according to their function.
a) chemical analysis and mineral analysis equipment;
b) physical test instrument;
c) mechanical test equipment.
4.1.2 situ trials (testing) equipment
Situ test (test) instrument divided according to their functions.
a) physical test instrument;
b) mechanical test equipment.
4.2 Classification of dam safety monitoring (observation) of the instrument
Dam Monitoring (observation) instrument divided according to their functions.
a) deformation monitoring (observation) instrument;
b) pressure/strain monitoring (observation) instrument;
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 15406-2007_English be delivered?Answer: Upon your order, we will start to translate GB/T 15406-2007_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 15406-2007_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 15406-2007_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 15406-2007?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15406-2007 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|