HOME   Cart(6)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 15367-2008 English PDF

US$399.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15367-2008: Motorcycles and mopeds -- Part and component -- Designations for vehicle with two and three wheels
Status: Valid

GB/T 15367: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 15367-2008English399 Add to Cart 3 days [Need to translate] Motorcycles and mopeds -- Part and component -- Designations for vehicle with two and three wheels Valid GB/T 15367-2008
GB/T 15367-1994English519 Add to Cart 4 days [Need to translate] Motorcycles and mopeds. Part and component designations for vehicle with three wheels Obsolete GB/T 15367-1994

PDF similar to GB/T 15367-2008


Standard similar to GB/T 15367-2008

GB 15365   GB 17353   GB 15744   GB/T 15366   

Basic data

Standard ID GB/T 15367-2008 (GB/T15367-2008)
Description (Translated English) Motorcycles and mopeds -- Part and component -- Designations for vehicle with two and three wheels
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard T80
Classification of International Standard 43.140
Word Count Estimation 17,150
Date of Issue 2008-11-28
Date of Implementation 2009-06-01
Older Standard (superseded by this standard) GB/T 15367-1994; GB/T 5359.4-1994
Quoted Standard GB 5359.1
Regulation (derived from) National Standard Approval Announcement 2008 No.19 (Total No.132)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the component name GB/T 5359. 1 defined motorcycles and mopeds. This standard applies to GB/T 5359. 1 defined motorcycles and mopeds.

GB/T 15367-2008: Motorcycles and mopeds -- Part and component -- Designations for vehicle with two and three wheels


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Motorcycles and mopeds. Part and component. Designations for vehicle with two and three wheels ICS 43.140 T80 National Standards of People's Republic of China Replacing GB/T 5359.4-1994, GB/T 15367-1994 Motorcycles and mopeds Wheelers and tricycles component name Posted 2008-11-28 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 5359.4-1994 "spare parts for motorcycles and mopeds two names" and GB/T 15367-1994 "Tricycle spare parts for motorcycles and mopeds name." This standard and GB/T 5359.4-1994, GB/T 15367-1994 compared to the main amendments are as follows. --- Increased name electric scooters electric mopeds parts. --- Increase the name "electronically controlled fuel injection system," "secondary air supply system", "fuel tank breathing valve" and other parts. --- Increase the name "rear suspension linkage mechanism," "hydraulic disc brakes," "joint braking mechanism" and other parts. --- Increasing the "ID", "Tools", "description" and other names. --- No longer included in the standard parts (such as screws, bolts, nuts, washers, simple bushes, pins, bearings, seals, etc.) name. --- No longer included in the name of a symmetrical member. --- No longer included in different parts of the same functional characteristics of the name of the component. --- This standard is not included in special motorcycles, mopeds special name private parts. --- The criteria for inclusion and division of the assembly (system), parts, components can additionally be divided according to a product. This standard "component name" press "part - Features - feature" determined, wherein. Parts. the first left, right, then the front and rear. For example. left front ×××, ××× right rear and the like. Site may be a part. Function. The main function of the first, after the secondary function. Secondary functions can only cause confusion and without generating a different meaning. Features. first the main features, after a secondary feature. Secondary features can only Without confusion and produce a different meaning. This standard was proposed by the National Development and Reform Commission. This standard by the National Automotive Standardization Technical Committee. This standard is mainly drafted by. Jincheng Group Co., Ltd., Shanghai Institute of motorcycles. The main drafters of this standard. Wang Liguo, Zhao Lina, Liu Jing, Hu Wenhao. This standard replaces the standards previously issued as follows. --- GB 5359.4-1985, GB/T 5359.4-1994, GB/T 15367-1994. Motorcycles and mopeds Wheelers and tricycles component name

1 Scope

This standard specifies the name of spare parts GB/T 5359.1 defined motorcycles and mopeds. This standard applies to GB/T 5359.1 defined motorcycles and mopeds.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 5359.1 motorcycles and mopeds term vehicle type Names of Parts 3 engine powertrain Names of Parts 3.1 engine powertrain portion of the heat engine shown in Table 1. Table 1 engine powertrain component name part of the heat engine No. Component Component Parts 1 cylinder head (head) Valve guides, cylinder head, cylinder head (head) casing, into the (row) Valve Seats, valve covers, cylinder head (head) gaskets, cylinder head (head) side cover 2 cylinder cylinder block, cylinder liner, cylinder block gasket 3 Crankshaft - connecting rod Crank, crank pin, connecting rod, connecting rod bearings, crankshaft balancer, balancer Driving gear, balancer driven gear 4 pistons, piston pins, piston pin retainer

5 Piston Ring

Oil ring combination blade, collar Piston gas ring (1 ring, 2 rings) Names of Parts 3.2 engine powertrain electronic control fuel injection system are shown in Table 2. Table 2 engine powertrain component name electronically controlled fuel injection system No. Component Component Parts Electronically controlled fuel Injection System ECU system (ElectricalControlUnit) Input circuit, output circuit, A/D converter, an actuator, a memory, Central processor, input/output interface sensor Pressure regulator Throttle body Tubing pressure tubing or pipe ordinary Supply pump Injector fuel filters, plug wires, solenoids, springs, armature, needle, needle shaft Cold start injector needle valve, solenoids, power connector, spring, nozzle Cold start switch power connector, a housing, a bimetal, heating coils, contacts

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15367-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15367-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15367-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15367-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15367-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15367-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.