|
US$639.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15174-2017: Programmes for reliability growth
Status: Valid GB/T 15174: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 15174-2017 | English | 639 |
Add to Cart
|
4 days [Need to translate]
|
Programmes for reliability growth
| Valid |
GB/T 15174-2017
|
| GB/T 15174-1994 | English | 599 |
Add to Cart
|
3 days [Need to translate]
|
Programmes for reliability growth
| Obsolete |
GB/T 15174-1994
|
PDF similar to GB/T 15174-2017
Basic data | Standard ID | GB/T 15174-2017 (GB/T15174-2017) | | Description (Translated English) | Programmes for reliability growth | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | L05 | | Classification of International Standard | 03.120.10; 03.120.30 | | Word Count Estimation | 32,348 | | Date of Issue | 2017-11-01 | | Date of Implementation | 2018-05-01 | | Older Standard (superseded by this standard) | GB/T 15174-1994 | | Regulation (derived from) | National Standard Announcement 2017 No. 29 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | GB/T 15174-2017: Programmes for reliability growth---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Program for reliability growth
ICS 03.120.10; 03.120.30
L05
National Standards of People's Republic of China
Replacing GB/T 15174-1994
Reliability growth program
(IEC 61014.2003, IDT)
Posted.2017-11-01
2018-05-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
1 Scope 1
2 Normative references 1
3 Terms and definitions 1
4 basic concepts 7
4.1 Overview 7
4.2 Weaknesses and Causes of Failure 7
4.3 product development process reliability growth basic concepts; comprehensive reliability engineering concept 8
4.4 Test phase product reliability growth basic concepts 8
4.5 Estimation of Reliability Growth Plans and Achieved Reliability in the Design Phase 9
5 Management 12
5.1 Overview 12
5.2 The design phase of the process and process 13
5.3 Communication and Coordination Mechanism 13
5.4 design stage of the manpower and cost 14
5.5 Cost benefits 15
6 Planning and implementation of the reliability growth program 15
6.1 Integrated Reliability Growth Concept and Summary 15
6.2 Reliability Growth at Design Stage 16
6.3 Confirmation of reliability growth during the pilot phase 18
6.4 Reliability growth test considerations 18
7 on-site reliability growth 28
References 29
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 15174-1994 "reliability growth program." Compared with GB/T 15174-1994, the main technical changes are as follows.
--- Added some terms and definitions (see Chapter 3);
--- Increasing the product development phase, the experimental phase, the reliability of the design phase of the basic concepts of growth (see Chapter 4);
--- Increased the design phase of the procedures and processes, labor and expenses part of the content (see Chapter 5);
--- Increased reliability and reliability of the concept of synthesis and review of the design phase of the reliability of growth activities to confirm the reliability of the experimental phase of growth
The contents of the chapter of the activity, and the contents of chapters 7, 8, 9 and 10 of the.1994 edition are given in chapter 6 for more detail (see
Chapter 6);
--- Part 6 of Chapter 7 of the.1994 version will be added to Chapter 6, an increase of field reliability growth part of the content (see Chapter 6);
--- Removed Appendix A (see the.1994 edition of Appendix A).
This standard uses the translation method identical with IEC 61014.2003 "reliability growth program."
The documents of our country that are consistent with the corresponding international documents that are normative references in this standard are as follows.
--- GB/T 5080.2-2012 Reliability testing Part 2 Design of test cycles (IEC 60605-2.1994, IDT);
Credibility management - Part 1. Credibility management (IEC 60300-1.1993, IDT);
--- GB/T 7288 (all parts) Equipment reliability test Recommended test conditions [IEC 60605-3 (all parts)];
System Reliability Analysis Techniques Failure Modes and Effects Analysis (FMEA) Procedures (IEC 60812-1).
2006, IDT);
--- GB/T 7828-1987 Design Review (IEC 61160.2005, NEQ);
GB/T 7829-1987 Fault Tree Analysis Program (IEC 61025.2006, NEQ).
This standard compared with IEC 61014.2003, made the following editorial changes.
--- 6.4.3 The last paragraph quoted Weibull analysis standard IEC 60605-4, there is a reference error, modified in this standard Weibull
Analyze standard IEC 61649, meanwhile, add Weibull analysis standard IEC 61649 in normative references of this standard;
--- In Figure 8, in all conditions after the judgment box to add "yes" and "no" to determine the answer;
--- In Figure 10, with reference to GB/T 15174-1994, an increase of the legend in the title of the figure.
This standard proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This standard by the National Electrical and Electronic Product Reliability and Maintenance of Standardization Technical Committee (SAC/TC24) centralized.
This standard was drafted Unit.Electronics Fifth Institute of Ministry of Industry and Information Technology, Beijing Aeronautical Engineering Technology Research Center, Wuhu 赛 Bao Information
Industry Technology Research Institute Co., Ltd., Peking University.
The main drafters of this standard. Gao Jun, Mei Wenhua, Hou Weiguo, Huang Yonghua, Li Dongfeng, Cheng Debin, the clock.
This standard replaces the standards previously issued as.
--- GB/T 15174-1994.
Reliability growth program
1 Scope
This standard specifies the requirements and guidelines for exposure and exclusion of weak links in hardware and software products in order to achieve the purpose of increasing reliability.
This standard applies when the product specification requirements for equipment (electronic, mechanical, mechanical hardware and software) to increase the reliability of the outline or known design if
It is impossible to meet the requirements without improvement.
The main contents of this standard include basic concepts, management, planning, testing (laboratory and field tests), failure analysis and improvement techniques. in order to
After estimating the level of reliability achieved after growth, the mathematical model is also briefly outlined.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version applies to this article
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 5080.1-2012 reliability test Part 1. Test conditions and statistical test principle (IEC 60300-3-5.2001,
IDT)
IEC 60300-1 Credibility Management Part 1. Dependability management - Part 1.
Dependabilitymanagementsystems)
IEC 60300-2, Credibility management - Part 2. Dependability management - Part 2.
Guidance fordependabilityprogrammemanagement)
IEC 60300-3-1, Credibility Management, Part 3-1. Application Guidelines, Credibility Analysis Techniques, Methodology Guidance (Dependability)
management-Part 3-1. Applicationguide-Analysistechniquesfordependability-Guidelinemethodology)
IEC 60605-2 equipment reliability test period design (Equipmentreliabilitytesting-Part 2.Designof
testcycles
IEC 60605-3 (all parts) Equipment reliability test Recommended test conditions (Equipmentreliabilitytesting-Part
3.Preferredtestconditions)
IEC 60812 System Reliability Analysis Technology Failure Mode and Effects Analysis (FMEA) procedures (Analysistechniquesfor
system reliability-Procedureforfailuremodeandeffectsanalysis (FMEA))
IEC 61025 Fault Tree Analysis Program [Faulttreeanalysis (FTA)]
IEC 61160 Design Review (Formaldesignreview)
IEC 61164 reliability growth statistics test and estimation method (Reliabilitygrowth-Statisticaltestandestimation
methods
IEC 61649 Weibulanalysis
3 Terms and definitions
The following terms and definitions apply to this document.
Note 1. Some terms come from GB/T 2900.13-2008, and terms derived from this standard are in square brackets after the definition. GB/T 19000-2000 made
Quotations for Quality Vocabulary.
Note 2. In the reliability growth test data analysis, a distinction is made between "failure strength" (for repairable products) and "failure rate" as defined in GB/T 2900.13-2008 or
The term "instantaneous failure rate" (for non-repairable or single-use products) terms are very important.
|