|
US$519.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14999.2-2025: Test methods for superalloys - Part 2: Microstructure
Status: Valid GB/T 14999.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14999.2-2025 | English | 519 |
Add to Cart
|
5 days [Need to translate]
|
Test methods for superalloys - Part 2: Microstructure
| Valid |
GB/T 14999.2-2025
|
| GB/T 14999.2-2012 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Test methods for superalloys -- Part 2: Verification of transverse macro-structures and defect by etch
| Valid |
GB/T 14999.2-2012
|
| GB/T 14999.2-1994 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Methods of acid etch test for transvese macro-structures of heat-resisting superalloys
| Obsolete |
GB/T 14999.2-1994
|
Basic data | Standard ID | GB/T 14999.2-2025 (GB/T14999.2-2025) | | Description (Translated English) | Test methods for superalloys - Part 2: Microstructure | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | H57 | | Classification of International Standard | 77.140.99 | | Word Count Estimation | 26,287 | | Date of Issue | 2025-08-29 | | Date of Implementation | 2026-03-01 | | Older Standard (superseded by this standard) | GB/T 14999.4-2012, GB/T 14999.6-2010 | | Issuing agency(ies) | State Administration for Market Regulation, National Standardization Administration | GB/T 14999.2-2025: Test methods for superalloys - Part 2: Microstructure---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT14999.2-2025
ICS 77.140.99
CCSH57
National Standard of the People's Republic of China
Replaces GB/T 14999.4-2012, GB/T 14999.6-2010
Test methods for high temperature alloys Part 2.Macrostructure
Released on August 29, 2025
Implementation on March 1, 2026
State Administration for Market Regulation
The National Standardization Administration issued
Preface
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents"
Drafting.
This document is Part 2 of GB/T 14999 “Test methods for high temperature alloys”. GB/T 14999 has been published in the following parts.
--- Part 1.Macroscopic tissue;
--- Part 2.High-magnification tissue.
This document replaces GB/T 14999.4-2012 "Test methods for high temperature alloys - Part 4.Grain structure and primary analysis of rolled high temperature alloy strips".
Carbide Distribution Determination" and GB/T 14999.6-2010 "Determination of Dual Grain Structure and Primary Carbide Distribution in Wrought High-Temperature Alloys".
The document is based on GB/T 14999.4-2012 and integrates the contents of GB/T 14999.6-2010.
Compared with GB/T 14999.6-2010, in addition to structural adjustments and editorial changes, the main technical changes are as follows.
a) Added the term and definition of “homogeneous grain structure” (see 3.1);
b) The terms and definitions of “wide-grade grains” and “double-peak grains” have been changed (see 3.5, 3.7, and 3.1.2 of GB/T 14999.6-2010).
and 3.1.4);
c) Added requirements for inspection surfaces of forged products (see 4.1.2);
d) Added the provisions on the determination and expression methods of uniform structure (see Chapter 5);
e) The relevant content on the classification of primary carbides has been modified (see 5.2.2, 5.3.1 of GB/T 14999.4-2012).
Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents.
This document was proposed by the China Iron and Steel Association.
This document is under the jurisdiction of the National Technical Committee on Steel Standardization (SAC/TC183).
This document was drafted by. Beijing Steel Research Institute Gaona Technology Co., Ltd., Fushun Special Steel Co., Ltd., Metallurgical Industry Information Standards
Research Institute, Western Superconducting Materials Technology Co., Ltd., Daye Special Steel Co., Ltd., Panzhihua Iron and Steel Group Jiangyou Great Wall Special Steel Co., Ltd.,
Zhonggang Stainless Steel Pipe Industry Technology Shanxi Co., Ltd.
The main drafters of this document are. Chen Huixia, Xie Jinli, Gu Qiang, Luan Yan, Yan Chengming, Liu Wei, Wang Lin, Zhang Hong, Zhu Hua, Wang Ruisen, Qiao Qiao,
Wang Aizhu, Zhao Xiaohua, Di Youni, Feng Chengcheng, and Cao Yuxin.
The previous versions of the documents replaced by this document are as follows.
---GB/T 14999.4, first issued in.1994, first revised in.2012;
---GB/T 14999.6, first issued in.2010.
introduction
GB/T 14999 "Test methods for high temperature alloys" is the standard for metallographic inspection of high temperature alloys, which aims to guide the metallographic inspection of high temperature alloys, castings,
GB/T 14999 is intended to consist of three parts.
constitute.
--- Part 1.Macroscopic tissue;
--- Part 2.High-magnification tissue;
--- Part 3.Determination of grain size, primary dendrite spacing and microporosity of castings.
This document is basically based on the geometry of the original physical photographs and has nothing to do with the alloy itself.
The characteristics correspond to a certain type of simulation picture provided in this document and can be determined according to the category; if the alloy has a strip grain structure and primary carbides
The distribution is consistent with the rating picture provided in this document and can be assessed using comparative methods as well as measured by quantitative indicators.
The measurement method of this document is only applicable to the determination of the dual grain structure and primary carbide distribution in a two-dimensional plane (cross section), but cannot determine
Is it suitable for the determination of three-dimensional dual grain structure and primary carbide distribution?
Test methods for high temperature alloys Part 2.Macrostructure
1 Scope
This document describes the sampling and preparation, determination and result presentation, and inspection report of high-magnification microstructure inspection methods for deformed high-temperature alloys.
This document is applicable to the inspection and evaluation of grain structure and primary carbides in rolled and forged high-temperature alloy products.
Gold reference used.
2 Normative references
The contents of the following documents constitute the essential clauses of this document through normative references in this document.
For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to
This document.
GB/T 6394 Determination of average grain size of metals
GB/T 24177 Characterization and determination method of double grain size
GB/T 30067 Metallographic Terminology
YB/T 4290 Determination of the maximum grain size grade (ALA grain size) on the metallographic examination surface
3 Terms and Definitions
The terms and definitions defined in GB/T 6394 and GB/T 30067 and the following apply to this document.
3.1
A structure in which the grain area, diameter or intercept length presents a unimodal distribution, which is approximately log-normal.
3.2
Duplexgrain
There are at least two grains with obviously different sizes and distribution forms, and the grain size difference between fine grains and coarse grains is not less than 3 levels.
3.3
banding grain
Grains in alternating areas with a grain size difference of not less than 3 levels along the metal flow direction or along the processing direction.
3.4
Individual coarse grain ALA (aslargeas) grain
The largest grain observed in the randomly dispersed isolated coarse grains has a size difference of not less than 3 levels from the matrix grains.
The percentage of the area occupied by the coarse grains is no more than 5% of the total area of the observation range.
NOTE. If the area percentage of coarse grains is greater than 5%, the corresponding provisions for bimodal grains (3.7) shall apply in this document.
3.5
wide-range grain
Grains with a wide range of sizes are randomly distributed in the field of view, and there is a grain size difference of no less than 5 levels between the largest grain and the smallest grain.
3.6
necklace grain necklacegrain
There are two types of grains with a grain size difference of not less than 3 levels in the field of view, and the small grains surround the large grains. The small grains account for the total size of the observation range.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14999.2-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 14999.2-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14999.2-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14999.2-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14999.2-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14999.2-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|