|
US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14566.3-2011: Specification and type for bursting discs -- Part 3: Flat bursting discs
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14566.3-2011 | English | 189 |
Add to Cart
|
3 days [Need to translate]
|
Specification and type for bursting discs -- Part 3: Flat bursting discs
| Valid |
GB/T 14566.3-2011
|
PDF similar to GB/T 14566.3-2011
Basic data | Standard ID | GB/T 14566.3-2011 (GB/T14566.3-2011) | | Description (Translated English) | Specification and type for bursting discs -- Part 3: Flat bursting discs | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J74 | | Classification of International Standard | 13.230 | | Word Count Estimation | 8,833 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-06-01 | | Quoted Standard | GB 567.1; GB 567.2; GB 567.3; GB 567.4 | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 22 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the structure of plate-shaped rupture disc type, nominal diameter, different materials, design burst pressure ranges and other technical requirements. This section applies to pressure vessels, pressure piping, or other confined pressure equipment (hereinafter referred to as pressure equipment) to prevent overpressure or excessive use of vacuum and bursting disc safety device. This section does not apply to the following rupture disc: Operating pressure surge that may arise during the reaction rate reaches detonation pressure equipment. Defense and military equipment have special requirements for bursting disc safety device. | GB/T 14566.3-2011: Specification and type for bursting discs -- Part 3: Flat bursting discs---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Specification and type for bursting discs Part 3. Flat bursting discs
ICS 13.230
J74
National Standards of People's Republic of China
Disc types and parameters
Part 3. Disc-shaped plate
Part 3. Flatburstingdiscs
Issued on. 2011-12-30
2012-06-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 14566 "Disc types and parameters" is divided into four parts.
--- Part 1. Positive arch bursting discs;
--- Part 2. Anti-arched bursting discs;
--- Part 3. Disc-shaped plate;
--- Part 4. graphite rupture disc.
This section GB/T Part of 314,566.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of the National boiler pressure vessel Standardization Technical Committee (SAC/TC262) and focal points.
This part mainly drafted by. AVIC Chengdu Security Systems Co., Ltd., Shanghai Gas Industry Association, China Special Equipment
Testing Institute, Shanghai Co., AQSIQ Huayi Group Construction Equipment Special Equipment Safety Supervision Bureau, Shenyang Aerospace Xinguang Security
System Co., Ltd., Dalian Safety Equipment Co., Ltd., Shanghai Hua Li Safety Equipment Co., Ltd., Shenyang Institute of Special Equipment Inspection.
The main drafters of this section. Yang Changjun, Xuzi Ping, Chen Hongping, Wei-Ming Zhou, Shou Binan, GAO Ji Xuan, Chen Zhaohui, Jin Zhiwei, Yu Jianliang,
Ding from the country, Zhang Zhiyi, Weiyong Biao.
Disc types and parameters
Part 3. Disc-shaped plate
1 Scope
1.1 GB/T 14566 in the provisions of this part of the plate-shaped structure bursting disc type, nominal diameter, design burst pressure range of different materials
Wai and other technical requirements.
1.2 section applies to pressure vessels, pressure piping, or other enclosed pressure equipment (hereinafter referred to as pressure equipment) to prevent overpressure or appeared
Of the bursting disc safety devices used in vacuum.
1.3 does not apply to the following rupture disc
--- May arise during the operation pressure surge, the reaction rate when arriving detonation pressure equipment.
--- Defense and military equipment with special requirements bursting disc safety device.
NOTE. Detonation. combustion speed material fast, reach 1000m/s or more, generating the usual blasting fundamentally different phenomenon, the phenomenon known as detonation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
Part 1 GB 567.1 bursting disc safety device. Basic requirements
GB 567.2 Part 2 bursting disc safety devices. Application, selection and installation
GB 567.3 bursting disc safety devices Part 3. Classification and dimensions
Section 4 GB 567.4 bursting disc safety device. type test
3 types and parameters
3.1 General requirements
3.1.1 Disc-shaped structure in the form of different plates, and can be divided into flat open seam bursting discs, bursting discs and ordinary type flat plate
Groove Disc with three kinds of patterns.
3.1.2 plate-shaped bursting disc safety technology requirements and type test shall comply with the provisions of GB 567.1 ~ 567.4.
3.2 flat slotted Rupture Disc
3.2.1 rupture disc assembly carried by different functional accessories, flat open seam rupture disc can be divided into the following two kinds of types.
a) flat slotted with reinforced ring bursting disc;
b) flat slotted belt reinforcing ring and the bracket-type rupture discs.
3.2.2 flat open rupture disc designed at 20 ℃ of the seam burst pressure range specified in Table 1, structure type shown in Figure 1.
|