|
US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14388-2010: Tungsten carbide tipped circular saw blade for woodworking
Status: Valid GB/T 14388: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14388-2010 | English | 229 |
Add to Cart
|
3 days [Need to translate]
|
Tungsten carbide tipped circular saw blade for woodworking
| Valid |
GB/T 14388-2010
|
| GB/T 14388-1993 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Tungsten carbide tipped circular saw blade for woodworking
| Obsolete |
GB/T 14388-1993
|
PDF similar to GB/T 14388-2010
Basic data | Standard ID | GB/T 14388-2010 (GB/T14388-2010) | | Description (Translated English) | Tungsten carbide tipped circular saw blade for woodworking | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J65 | | Classification of International Standard | 79.120.10 | | Word Count Estimation | 10,14 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-03-01 | | Older Standard (superseded by this standard) | GB/T 14388-1993 | | Quoted Standard | GB/T 699-1999; GB/T 4897.1-2003; GB/T 18376.1-2008; JB/T 4171-1999 | | Adopted Standard | DIN 8083-1982, NEQ; DIN 5134-5-1982, NEQ; | | Regulation (derived from) | National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the woodworking carbide saw blade types and sizes, technical requirements, basic requirements, test methods and marking of packaging. This standard applies to a diameter of 100mm ~ 630mm sawn timber, plywood, plastics and non-ferrous metals such as woodworking carbide saw blade. | GB/T 14388-2010: Tungsten carbide tipped circular saw blade for woodworking---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tungsten carbide tipped circular saw blade for woodworking
ICS 79.120.10
J65
National Standards of People's Republic of China
Replacing GB/T 14388-1993
Woodworking carbide circular saw blade
Issued on. 2010-11-10
2011-03-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 14388-1993 "woodworking carbide circular saw blade," the amendment.
This standard is not equivalent to DIN8083. 1982 "Carbide circular saw blade sizes, the number of teeth" and DIN5134 Part 5. 1982 "Wood
Workers circular saw blade Carbide saw blade delivery conditions. "
This standard DIN8083. 1982 "Carbide circular saw blade sizes, the number of teeth" and DIN5134 Part 5. 1982 "circular saw
Piece carbide saw blade delivery conditions "Compared amended as follows.
--- Table 1 D increased values in parentheses;
--- Approximate number of teeth has been modified.
This standard and GB/T 14388-1993 There are differences compared to.
--- Increasing the foreword;
--- Of Figure 1 has been amended and supplemented;
--- The content of 4.5 has been modified;
--- Table 2 adds "symmetry tolerance Ts" column;
--- This standard replaces GB/T 14388-1993.
Appendix A of this standard is an informative annex.
The standard proposed by China Machinery Industry Federation.
This standard by the National Woodworking Machine and Tool Standardization Technical Committee (SAC/TC84) centralized.
This standard was drafted. Harbin two tool technology limited liability company, Leitz (Nanjing) Co., Ltd.
Drafters of this standard. Jiang Shihong, Liu Wei, Ma Lianxiang.
This standard replaces the standards previously issued as follows.
--- GB/T 14388-1993.
Woodworking carbide circular saw blade
1 Scope
This standard specifies the basic requirements for woodworking carbide circular saw blade type and size, technical requirements, test methods and marking of the package.
This standard applies to a diameter of 100mm ~ 630mm sawn timber, plywood, plastic and non-ferrous metals such as woodworking carbide circular saw
Sheet (hereinafter referred to as the blade).
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 699-1999 quality carbon structural steel
GB/T 4897.1-2003 Particleboard - Part 1. Common requirements for all board types (EN312-1.1997, NEQ)
GB/T 18376.1-2008 Grades of cemented carbide Part 1. grades of cemented carbide cutting tools
JB/T 4171-1999 General woodworking machine accuracy test
3 type and size
3.1 Press the blade type and size specified in Table 1 and Fig.
Table 1 millimeters
DB bd approximate pitch
Basic
size
limit
deviation
Basic
size
limit
deviation
Basic
size
limit
deviation
Basic
size
limit deviation
(H8)
101316203040
Teeth
(140)
(180)
(225)
(280)
± 2
2.5
3.2
2.5
3.2
2.5
3.2
2.5
3.2
2.5
3.2
2.5
3.2
2.5
3.2
3.6
2.5
3.2
3.6
2.5
3.2
3.6
2.5
3.2
3.6
2.5
3.2
3.6
2.5
3.2
3.6
± 0.1
1.6
2.2
1.6
2.2
1.6
2.2
1.6
2.2
1.6
2.2
1.6
2.2
1.6
2.2
2.6
1.6
2.2
2.6
1.6
2.2
2.6
1.6
2.2
2.6
1.6
2.2
2.6
1.6
2.2
2.6
± 0.05
(85)
(85)
0.033
0.046
0.033
0.046
0.033
0.046
0.033
0.046
0.054
0.033
0.046
0.054
twenty four
twenty four
twenty four
twenty four
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14388-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 14388-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14388-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14388-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14388-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14388-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|