|
US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14382-2008: Tee strainers for fluids for pipes
Status: Valid GB/T 14382: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14382-2008 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Tee strainers for fluids for pipes
| Valid |
GB/T 14382-2008
|
| GB/T 14382-1993 | English | 439 |
Add to Cart
|
4 days [Need to translate]
|
Tee strainers for fluids for pipes
| Obsolete |
GB/T 14382-1993
|
PDF similar to GB/T 14382-2008
Basic data | Standard ID | GB/T 14382-2008 (GB/T14382-2008) | | Description (Translated English) | Tee strainers for fluids for pipes | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | J15 | | Classification of International Standard | 23.040.60 | | Word Count Estimation | 14,142 | | Date of Issue | 2008-08-25 | | Date of Implementation | 2009-04-01 | | Older Standard (superseded by this standard) | GB/T 14382-1993 | | Quoted Standard | GB/T 191; GB/T 699; GB/T 700; GB 713; GB/T 1220; GB/T 1221; GB/T 1591; GB/T 3280; GB/T 4237; GB/T 4238; GB/T 4879; GB/T 4892; GB/T 5330; GB/T 6388; GB/T 7306.2; GB/T 9115; GB/T 9116; GB/T 9119; GB/T 9124; GB/T 10612; GB/T 12459; GB/T 12716; GB/T 13306; GB/T 14383; JB/T 4730.2 | | Regulation (derived from) | National Standard Approval Announcement 2008 No.14 (Total No.127) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the pipeline with three pass filter (hereinafter referred to as filters) classification, requirements, test methods and inspection rules. This standard applies to DN400 and below the nominal size, nominal pressure PN16-PN40 and Classl50-Class300, operating temperature range of pipe filters -196��C ~ 540��C for. | GB/T 14382-2008: Tee strainers for fluids for pipes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tee strainers for fluids for pipes
ICS 23.040.60
J15
National Standards of People's Republic of China
Replacing GB/T 14382-1993
Pipeline with three-pass filter
Posted 2008-08-25
2009-04-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
This standard is GB/T 14382-1993 "pipe with a three-pass filter" revision.
This standard and GB/T 14382-1993 compared to the main changes are as follows.
--- Increasing the term;
--- DC T-type filter, increasing the lengthened;
--- Pore size of the socket has been modified;
--- DC T-type filter, an increase of PN16, PN25 and PN40 three pressure level;
--- Increasing the filter main dimension tolerance and shape tolerance;
--- Increased requirements for non-destructive testing of butt weld;
--- Increased the pressure strength test pressure at specific design temperature and design pressure conditions;
--- Canceled the hydraulic seal test.
From the date of implementation of this standard instead of GB/T 14382-1993.
The standard proposed by China Machinery Industry Federation.
This standard by the National Standardization Technical Committee pipe accessories.
This standard was drafted. the machine Productivity Promotion Center, Qidong mixer Co., Ltd., Wuxi Hua Er Tai Machinery Manufacturing Co.,
Henan mountains Valve Co., Ltd.
The main drafters of this standard. Huang Weixian, Li Junying, Feng Feng, Li Zhongyun, Yangquan Qing.
This standard replaces the standards previously issued as follows.
--- GB/T 14382-1993.
Pipeline with three-pass filter
1 Scope
This standard specifies the pipeline with three-pass filter (hereinafter referred to as filter) classification, requirements, test methods and inspection rules.
This standard applies to nominal size DN400 and below, nominal pressure PN16 ~ PN40 and Class150 ~ Class300, operating temperature
Range of pipe filters of -196 ℃ ~ 540 ℃.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs (GB/T 191-2008, ISO 780.1997, MOD)
GB/T 699 high-quality carbon structural steel
GB/T 700 carbon structural steel (GB/T 700-2006, ISO 630.1995, NEQ)
GB 713 boiler and pressure vessel steel plate (GB 713-2008, ISO 9328-2.2004, NEQ)
GB/T 1220 stainless steel rods
GB/T 1221 Steel Bars
GB/T 1591 high-strength low-alloy structural steel (GB/T 1591-1994, neq ISO 4950. 1981)
GB/T 3280 stainless steel cold-rolled steel sheet and strip
GB/T 4237 hot-rolled stainless steel sheet and strip
GB/T 4238 heat-resistant steel sheet and strip
GB/T 4879 rust-proof packaging
GB/T 4892 hard straight cube transport packaging size series (GB/T 4892-2008, ISO 3394. 1984, NEQ)
GB/T 5330 industrial woven square hole wire mesh
GB/T 6388 transport package shipping mark
GB/T 7306.2 55 ° sealing pipe thread Part 2. internal Taper internal and external threads (GB/T 7306.2-2000,
eqv ISO 7-1.1994)
GB/T 9115 (all parts) welded steel pipe flange
GB/T 9116 (all parts) with a neck flat welded steel pipe flanges
GB/T 9119 flat panel projecting flat welded steel pipe flanges
GB/T 9124 steel pipe flanges
GB/T 10612 industrial sieve plate thickness < 3mm hole and square hole sieve (GB/T 10612-2003, ISO 7805-2.
1987, MOD)
GB/T 12459 steel welded seamless pipe fittings
GB/T 12716 60 ° sealing pipe thread
GB/T 13306 signs
GB/T 14383 forged socket welding and threaded fittings
JB/T 4730.2 Non-destructive testing of pressure equipments - Part 2. ray detector
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14382-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 14382-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14382-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14382-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14382-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14382-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|