HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14364-2008 English PDF

US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14364-2008: Sliding intermediate shaft bearing of marine shafting
Status: Valid

GB/T 14364: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 14364-2008English209 Add to Cart 3 days [Need to translate] Sliding intermediate shaft bearing of marine shafting Valid GB/T 14364-2008
GB/T 14364-1993English239 Add to Cart 2 days [Need to translate] Marine intermediate shafting sliding bearing Obsolete GB/T 14364-1993

PDF similar to GB/T 14364-2008


Standard similar to GB/T 14364-2008

GB/T 37452   CB/T 4197   GB/T 11865   GB/T 14653   GB/T 12922   GB/T 14654   

Basic data

Standard ID GB/T 14364-2008 (GB/T14364-2008)
Description (Translated English) Sliding intermediate shaft bearing of marine shafting
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard U48
Classification of International Standard 47.020.05
Word Count Estimation 9,942
Date of Issue 2008-07-30
Date of Implementation 2009-02-01
Older Standard (superseded by this standard) GB/T 14364-1993
Quoted Standard GB/T 1804-2000; GB/T 699-1999; GB/T 1173-1995; GB/T 1174-1992; GB/T 9439-1988; GB/T 11352-1989
Regulation (derived from) National Standard Approval Announcement 2008 No.12 (Total No.125)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the sliding center bearing (hereinafter referred to as bearing > classification, requirements, test methods, inspection rules, packaging, transport and storage of the standard applicable to its line speed of 1 5 m/s ~ 8 m/s, .. units of not more than 1. 0 MPa pressure vessels intermediate shafting sliding bearing design, manufacture and acceptance.

GB/T 14364-2008: Sliding intermediate shaft bearing of marine shafting

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sliding intermediate shaft bearing of marine shafting ICS 47.020.05 U48 National Standards of People's Republic of China Replacing GB/T 14364-1993 Ship sliding shaft intermediate bearing Posted 2008-07-30 2009-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard replaces GB/T 14364-1993 "ship shafting sliding intermediate bearing." The standards are compared with the GB/T 14364-1993 The following major technology changes. --- Modify the scope of "unit pressure of 0.6MPa" to "unit pressure not more than 1.0MPa"; --- Canceled C products; --- Added Figure 1 position size L2; --- Increasing the size of the table and the corresponding L2 2; --- Table 3, an increase of 850 to 1000 series, increasing the size and the corresponding position size L2; --- Edit "3.5 bearing operating temperature of 65 ℃" to "temperature-dependent components 4.6.4 Bearing work. Bearing operating temperature It should not exceed 70 ℃, or the oil temperature should not exceed 65 ℃... " The standard proposed by China State Shipbuilding Corporation. This standard by the National Marine Machinery Standardization Technical Committee. This standard was drafted. China Shipbuilding Industry Corporation seventh Research Institute of ○. The main drafters of this standard. Cao Hong, Yuan Jinyong. This standard replaces the standards previously issued as follows. --- GB/T 14364-1993. Ship sliding shaft intermediate bearing

1 Scope

This standard specifies the middle sliding bearings (hereinafter referred to as bearing) classification, requirements, test methods, inspection rules, packaging, transport and storage. This standard is applicable to their linear velocity of 1.5m/s ~ 8m/s, the unit pressure is less than 1.0MPa ship shafting sliding center bearing Design, manufacture and acceptance.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance tolerance (eqv ISO 2768-1. 1989) GB/T 699-1999 quality carbon structural steel GB/T 1173-1995 cast aluminum GB/T 1174-1992 bearing alloy casting (neq ISO 4381. 1981) GB/T 9439-1988 Gray Iron Castings GB/T 11352-1989 Carbon steel castings for general engineering purposes (neq ISO 3755. 1975) Category 3 3.1 Bearing type classification Table 1. Table 1 Bearing type classification in millimeters Type the name of shaft diameter D A single oil wedge sliding intermediate bearing 80 to 220 Multi-B oil wedge sliding bearing 250 to the middle of 1000 3.2 A class bearing structure and dimensions in Figure 1 and Table 2. 1 --- rejection oil pan; 4 --- slinger ring; 7 --- dipstick; 10 --- under the pad; 2 --- oiling bucket; 5 --- observation cover; 8 --- bearing;. 11 --- plug. 3 --- the bush; 6 --- bearing cap; head attached. 9 --- zinc block; Figure 1 A class bearings

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14364-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14364-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14364-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14364-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14364-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14364-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.