|
US$209.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14353.2-2010: Methods for chemical analysis of copper ores, lead ores and zinc ores -- Part 2: Determination of lead content
Status: Valid GB/T 14353.2: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 14353.2-2010 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Methods for chemical analysis of copper ores, lead ores and zinc ores -- Part 2: Determination of lead content
| Valid |
GB/T 14353.2-2010
|
| GB/T 14353.2-1993 | English | 359 |
Add to Cart
|
3 days [Need to translate]
|
Methods for chemical analysis of copper ores lead ores and zinc ores. Determination of lead
| Obsolete |
GB/T 14353.2-1993
|
PDF similar to GB/T 14353.2-2010
Basic data | Standard ID | GB/T 14353.2-2010 (GB/T14353.2-2010) | | Description (Translated English) | Methods for chemical analysis of copper ores, lead ores and zinc ores -- Part 2: Determination of lead content | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | D40 | | Classification of International Standard | 73.060 | | Word Count Estimation | 9,958 | | Date of Issue | 2010-11-10 | | Date of Implementation | 2011-02-01 | | Older Standard (superseded by this standard) | GB/T 14353.2-1993 | | Quoted Standard | GB/T 6682; GB/T 14505 | | Regulation (derived from) | National Standard Approval Announcement 2010 No.8 (Total No.163) | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the copper ore, determination of the amount of lead zinc ore, booze. This section applies to copper ore, lead ores, determination of zinc ores of lead content. Measuring range: flame atomic absorption spectrophotometry from 0. 001% to 5% lead, EDTA volumetric method 0. 50% to 20% lead. | GB/T 14353.2-2010: Methods for chemical analysis of copper ores, lead ores and zinc ores -- Part 2: Determination of lead content
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of copper ores, lead ores and zinc ores Part 2. Determination of lead content
ICS 73.060
D40
National Standards of People's Republic of China
Replacing GB/T 14353.2-1993
Copper ores lead ores and zinc ores - Methods for chemical analysis
Part 2. Determination of lead content
Methodsforchemicalanalysisofcopperores, leadoresandzincores-
Part 2. Determinationofleadcontent
Issued on. 2010-11-10
2011-02-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 14353 "copper ores lead ores and zinc ores chemical analysis method" is divided into 18 parts.
--- Part 1. Determination of copper content;
--- Part 2. Determination of lead content;
--- Part 3. Determination of the amount of zinc;
--- Part 4. Determination of cadmium content;
--- Part 5. Determination of nickel content;
--- Part 6. Determination of cobalt content;
--- Part 7. Determination of arsenic content;
--- Part 8. Determination of the amount of bismuth;
--- Part 9. Determination of molybdenum;
--- Part 10. Determination of tungsten;
--- Part 11. determination of silver;
--- Part 12. Determination of sulfur content;
--- Part 13. the amount of gallium, indium and thallium amount for determination;
--- Part 14. Determination of germanium content;
--- Part 15. Determination of the amount of selenium;
--- Part 16. Determination of tellurium content;
--- Part 17. Determination of the amount of thallium;
--- Part 18. the amount of copper, lead content, the amount of zinc, cobalt and nickel content determination.
This section GB/T 14353 Part 2.
This Part replaces GB/T 14353.2-1993 "copper ores lead ores and zinc ores - Methods for chemical analysis of lead determination."
Section compared with the GB/T 14353.2-1993, major changes in the following.
--- Increased alert, warnings;
--- Modify the sample drying temperature;
--- Increased EDTA volumetric method;
--- Delete the original standard first post hydrochloric acid - sodium chloride supporting electrolyte polarographic method and the second in barium lead chromate capacity method.
Appendix A of this section is an informative annex.
This section presents the People's Republic of China Ministry of Land Resources.
This part of the National Standardization Technical Committee under the jurisdiction of Land and Resources.
This section is responsible for drafting. National geology test center.
This section is drafted. the Shaanxi Provincial Institute of Experimental Geology and Mineral Resources.
The main drafters of this section. guoju right, Xiong Ying, Hao-hui.
This part of the standard replaces the previous editions are.
--- GB/T 14353.2-1993.
Copper ores lead ores and zinc ores - Methods for chemical analysis
Part 2. Determination of lead content
Warning. Use of this section a person shall be regular laboratory work experience. This section does not indicate that all possible security issues.
Users have the responsibility to take appropriate safety and health practices and to ensure compliance with the conditions relevant national regulations.
1 Scope
GB/T 14353 provisions of this part of the copper ore, lead ore, zinc ore Determination of lead content.
This section applies to copper ore, lead ore, lead measured amount of zinc ore.
Measurement range. Flame atomic absorption spectrophotometry 0.001% to 5% of lead, EDTA volumetric method 0.50% to 20% lead.
2 Normative references
The following documents contain provisions which, through reference GB/T 14353 in this section constitute provisions of this part of the dated reference documents
Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section
Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this
section.
Laboratory use specifications and test methods GB/T 6682 Analysis
GB/T 14505 method for chemical analysis of rocks and ores General rules and regulations
3 flame atomic absorption spectrophotometry
3.1 Principle
Sample by aqua regia (or hydrofluoric acid, aqua regia, perchloric acid) decomposition in nitric acid (595) medium (or nitric acid - boric acid media), empty
Air - acetylene flame at the wavelength at 283.3nm by atomic absorption spectrophotometer absorbance was measured to calculate the amount of lead.
3.2 Reagents
Unless otherwise stated in this section are consistent with the use of analytical reagent and GB/T 6682 analytical laboratory use in the analysis.
3.2.1 hydrochloric acid (ρ1.19g/mL).
3.2.2 nitrate (ρ1.42g/mL).
3.2.3 Hydrofluoric acid (ρ1.13g/mL) Warning. toxic hydrofluoric acid, corrosive, the operation should wear gloves to prevent skin contact
3.2.4 aqua regia (hydrochloric acid, nitric acid = 31) freshly prepared.
3.2.5 perchloric acid (ρ1.67g/mL) Warning. explosive materials, careful
3.2.6 nitric acid (11).
3.2.7 nitric acid (595).
3.2.8 boric acid solution (60g/L).
3.2.9 Lead Standard Solution.
a) lead standard stock solution [ρ (Pb) = 1.00mg/mL]. Weigh 1.0000g metallic lead (≥99.99%), placed in 250mL burn
Cup, cover the surface of the dish, add 10mL of nitric acid (3.2.6) was dissolved by heating with a small amount of water to the surface of the dish along the beaker wall, move
1000mL volumetric flask, dilute to the mark, shake;
b) lead standard solution [ρ (Pb) = 20.0μg/mL]. dispensing 20.00mL lead standard stock solution [3.2.9a)], placed 1000mL capacity
Volumetric flask, dilute to the mark, shake.
3.3 Instrument
3.3.1 atomic absorption spectrophotometer with Pb hollow cathode lamp.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 14353.2-2010_English be delivered?Answer: Upon your order, we will start to translate GB/T 14353.2-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 14353.2-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 14353.2-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 14353.2-2010?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14353.2-2010 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|