HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14328-2008 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14328-2008: Roughing end mill
Status: Valid

GB/T 14328: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 14328-2008	English	229	Add to Cart	3 days [Need to translate]	Roughing end mill	Valid	GB/T 14328-2008
GB/T 14328.1-1993	English	199	Add to Cart	2 days [Need to translate]	Roughing end mill with parallel shank types and dimensions	Obsolete	GB/T 14328.1-1993

PDF similar to GB/T 14328-2008

Standard similar to GB/T 14328-2008

GB/T 33524.2 GB/T 972 GB/T 5104 GB/T 14330 GB/T 14333 GB/T 14329

Basic data

Standard ID	GB/T 14328-2008 (GB/T14328-2008)
Description (Translated English)	Roughing end mill
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	J41
Classification of International Standard	25.100.20
Word Count Estimation	10,142
Date of Issue	2008-06-03
Date of Implementation	2009-01-01
Older Standard (superseded by this standard)	GB/T 14328.1-1993; GB/T 14328.2-1993; GB/T 14328.3-1993; GB/T 14328.4-1993
Quoted Standard	GB/T 1443; GB/T 6131.1; GB/T 6131.2
Regulation (derived from)	National Standard Approval Announcement 2008 No.9 (Total No.122)
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the shank roughing end mills, flatted parallel shank roughing end mills, Morse taper shank roughing end mills of the type and size, labeled sample, technical requirements, logo and packaging. This standard applies to a diameter of 6 mm to 50 mm shank roughing end mills, diameter of 8 mm to 63 mm Weldon shank roughing end mills and a diameter of 10 mm to 80 mm Morse taper shank roughing cutter.

GB/T 14328-2008: Roughing end mill

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Roughing end mill ICS 25.100.20 J41 National Standards of People's Republic of China Replacing GB/T 14328.1 ~ 14328.4-1993 Roughing end mills Posted 2008-06-03 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is GB/T 14328.1-1993 "Straight Shank roughing end mill types and dimensions", GB/T 14328.2-1993 "flattened Roughing end mill shank types and dimensions ", GB/T 14328.3-1993" Morse taper shank roughing end mill types and dimensions " GB/T 14328.4-1993 "roughing end mills technical conditions" consolidated amendments. This standard replaces GB/T 14328.1-1993, GB/T 14328.2-1993, GB/T 14328.3-1993, GB/T 14328.4- 1993. This standard and GB/T 14328.1-1993 compared to the main changes are as follows. --- Modify the normative references; --- Note to delete the original table, re-specified in 3.1.1; --- Mark example made some changes. 1) to straight shank end mill roughing roughing end mills; 2) GB/T 14328.1 to GB/T 14328-2008; 3) shank long series of roughing end mills increase labeled "long." This standard and GB/T 14328.2-1993 compared to the main changes are as follows. --- Modify the normative references; --- Note to delete the original table, re-specified in 3.2.1; --- Mark example made some changes. 1) roughing end mill to Weldon shank roughing end mills; 2) GB/T 14328.2 to GB/T 14328-2008; 3) long series flatted parallel shank roughing end mills increase labeled "long." This standard and GB/T 14328.3-1993 compared to the main changes are as follows. --- Modify the normative references; --- Note to delete the original table, again in 3.3.1; --- Mark example made some changes. 1) roughing end mill to Morse taper shank roughing end mills; 2) GB/T 14328.3 to GB/T 14328-2008; 3) long series of Morse taper shank roughing end mills increase labeled "long." This standard and GB/T 14328.4-1993 compared to the main changes are as follows. --- Remove the performance test; --- Signs and packaging made editorial changes. The standard proposed by China Machinery Industry Federation. This standard tool by the National Standardization Technical Committee (SAC/TC91) centralized. This standard was drafted. Chengdu Tool Institute. The main drafters of this standard. Zeng Yu ring. This standard replaces the standards previously issued as follows. --- GB/T 14328.1-1993; --- GB/T 14328.2-1993; --- GB/T 14328.3-1993; --- GB/T 14328.4-1993. Roughing end mills

1 Scope

This standard specifies the straight shank roughing end mills, Weldon shank roughing end mills, Morse taper shank roughing end mill of the type and scale Inch, tag example, technical requirements, marking and packaging. This standard applies to 6mm ~ 50mm diameter straight shank roughing end mills, diameter of 8mm ~ 63mm Weldon shank roughing End mills and diameter 10mm ~ 80mm Morse taper shank roughing cutter.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1443 from machine tools and tool handles with clip cone (GB/T 1443-1996, eqv ISO 296.1991) GB/T 6131.1 cutter straight shank - Part 1. General straight shank type and size (GB/T 6131.1-2006, ISO 3338-1. 1996, IDT) GB/T 6131.2 cutter straight shank - Part 2. flatted straight shank type and size (GB/T 6131.2-2006, ISO 3338-2. 2000, MOD)

3 type and size

3.1 Straight Shank roughing end mills 3.1.1 roughing end mills with parallel shank types and dimensions are specified in Figure 1 and Table 1. Allow cutter made with the neck, shank foot Inch and deviations according to GB/T 6131.1 requirements. A type Type B Note. A type of waveform edge, B-trapezoidal blade. Figure 1

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14328-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14328-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14328-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14328-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14328-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14328-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.