HOME   Cart(9)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 14315-2008 English PDF

US$329.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 14315-2008: Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors
Status: Valid

GB/T 14315: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 14315-2008English329 Add to Cart 3 days [Need to translate] Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors Valid GB/T 14315-2008
GB/T 14315-1993English719 Add to Cart 5 days [Need to translate] Compression type terminal lugs and ferrules for power cables with copper or aluminium conductors Obsolete GB/T 14315-1993

PDF similar to GB/T 14315-2008


Standard similar to GB/T 14315-2008

GB/T 12706.3   GB/T 12706.1   GB/T 12706.4   GB/T 29631   GB/T 11017.1   GB/T 14316   

Basic data

Standard ID GB/T 14315-2008 (GB/T14315-2008)
Description (Translated English) Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard K13
Classification of International Standard 29.100.20
Word Count Estimation 14,126
Date of Issue 2008-12-30
Date of Implementation 2009-10-01
Older Standard (superseded by this standard) GB/T 14315-1993
Regulation (derived from) Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the 35kV (Um = 40. 5kV) and below power cables with crimp -type copper, aluminum and copper and aluminum terminals and transitions of copper, aluminum connecting tube models, specifications, technical requirements, testing, inspection rules, packaging and storage and transportation. This standard applies to 35kV (Um = 40. 5kV) and below power cables with crimp -type copper, aluminum and copper and aluminum terminals and transitions of copper, aluminum connecting pipe. For copper conductor cross section range (10 ~ 630) mm2, aluminum conductor cross section range (16 ~ 630) mm2, for fixed laying wires and cables may also refer to other uses.

GB/T 14315-2008: Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Compression type terminal lugs and ferrules with copper or aluminum for power cables conductors ICS 29.100.20 K13 National Standards of People's Republic of China Replacing GB/T 14315-1993 Power cable conductors Crimping copper and aluminum terminals and connecting pipe Posted 2008-12-30 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Product Code and representation 2 5 2 Technical Requirements 10 6 Inspection Rules 7 signs, packaging 10

Foreword

GB/T 14315-2008 instead of GB/T 14315-1993 "power cable conductors crimping copper and aluminum terminals and connecting pipe." This standard compared with GB/T 14315-1993, the main changes are as follows. --- Range increased to 630mm2 cross-section and the corresponding size (Excerpts Chapter 1, Table 1 to Table 8); --- Increased copper and aluminum transition terminal block products and the corresponding size (this version 4.1.2, Figure 3, Table 4); --- Increased blocking oil type copper connecting pipe products and the appropriate size (5 edition, Table 8); --- Deleted "pressed conductor", "non pressed conductor", "crimp barrels Short", "Long and crimp barrels Model" and "name, with Way "table (1993 version 4.1.3, Table 1); --- Modify, merge pressed conductor, non-conductor pressed inner diameter series, removed the crimping cylinder size Short Series (1993 edition Table 2, Table 3, Table 4, Table 5, Table 6, Table 7, this edition Tables 1 to 3, Tables 5 to 7); --- Modification used copper as copper III (1993 version 6.1, this version 5.1); --- "The electrical and mechanical performance requirements," according to GB/T 9327-2008 "rated voltage of 35kV (Um = 40.5kV) power cables Conductor crimp and mechanical connection fittings Test methods and requirements "content modification (1993 edition Tables 8 and 9, edition Tables 9 and 10); --- Remove the appendix (1993 edition Appendix A, Appendix B, Appendix C, Appendix D). The standard proposed by China Electrical Equipment Industrial Association. This standard by the national wire and cable Standardization Technical Committee (SAC/TC213) centralized. This standard was drafted. Shanghai Electric Cable Research Institute, the Permanent Group Co., Ltd. The main drafters of this standard. Gu Rongrong, Ge Guangming, Chen Jie, Zheng right, Huang Jinxian, Zhang Zhiyong, Ma Zhan. This standard replaces the standards previously issued as follows. --- GB/T 14315-1993. Power cable conductors Crimping copper and aluminum terminals and connecting pipe

1 Scope

This standard specifies the 35kV (Um = 40.5kV) power cables and crimp terminals conductor copper, aluminum and copper and aluminum transition terminal Copper, aluminum connecting tube models, specifications, technical requirements, testing, inspection rules, packaging and transportation. This standard applies to 35kV (Um = 40.5kV) power cables and crimp terminals conductor copper, aluminum and copper and aluminum transition terminal Copper, aluminum connecting pipe. Applicable copper conductor cross-section in the range of (10 ~ 630) mm2, aluminum conductors cross-section range (16 ~ 630) mm2, for fixed installation Other wires and cables can also be used for reference use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 1527-2006 Copper and copper alloy tube drawing GB/T 1800.3-1998 Limits and fits - Bases - Part 3. standard tolerances and fundamental deviations in the value table (eqv ISO 286-1. 1988) GB/T 2900.10 Electrotechnical terminology Cable (GB/T 2900.10-2001, idt IEC 60050 (461). 1984) GB/T 3190-1996 Wrought aluminum and aluminum alloy chemical composition (neq ISO 209.1991) GB/T 4423-2007 Copper and copper alloy rod drawing GB/T 5231-2001 processing of copper and copper alloy chemical composition and shape of the product GB/T 9327-2008 rated voltage of 35kV (Um = 40.5kV) power cables conductors connection crimp and mechanical Fittings - Test methods and requirements (IEC 61238-1.2003, Compressionandmechanicalconnectorsforpowercables forratedvoltagesupto30kV (Um = 36kV) Part 1. Testmethodsandrequirements, MOD)

3 Terms and Definitions

GB/T 2900.10, and established the following terms and definitions apply to this standard. 3.1 By crimping the conductive cable end fittings and electrical conductor means connected to the connection phase, it is usually connected to one end of the cable conductor Tubular, and the other end connected to a flat plate electrical device specific shape. 3.2 Crimp way and two or more adjacent conductor in the middle of the line connected to each other with a conductive tubular fittings. 3.3 The two metals from the processing of copper and aluminum welding technology or other terminals for connecting conductive member is made of two metals.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 14315-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 14315-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 14315-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 14315-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 14315-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 14315-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.