HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 13825-2008 English PDF

US$94.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13825-2008: Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area
Status: Valid

GB/T 13825: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 13825-2008English94 Add to Cart 3 days [Need to translate] Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area Valid GB/T 13825-2008
GB/T 13825-1992English199 Add to Cart 2 days [Need to translate] Metallic coatings--Determination of the mass for hot dip galvanized coatings on ferrous materials--Gravimetric method Obsolete GB/T 13825-1992

PDF similar to GB/T 13825-2008


Standard similar to GB/T 13825-2008

GB/T 13912   GB/T 11379   GB/T 13911   GB/T 45340   GB/T 45345   GB/T 45333   

Basic data

Standard ID GB/T 13825-2008 (GB/T13825-2008)
Description (Translated English) Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard A29
Classification of International Standard 25.220.40
Word Count Estimation 5,596
Date of Issue 2008-06-19
Date of Implementation 2009-01-01
Older Standard (superseded by this standard) GB/T 13825-1992
Adopted Standard ISO 1460-1992, IDT
Regulation (derived from) Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the determination of ferrous metal materials galvanized layer mass per unit area method. This standard requires accurate calculation of the surface area of ??the sample. Therefore, this standard applies to the specimen surface readily ascertainable. If the specimen is heavy and can not according to the standard requires the implementation of Chapter 5, you should use other methods of measuring the quality of hot-dip galvanizing layer.

GB/T 13825-2008: Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic coatings. Hot dip galvanized coatings on ferrous materials. Gravimetric determination of the mass per unit area ICS 25.220.40 A29 National Standards of People's Republic of China GB/T 13825-2008/ISO 1460.1992 Replacing GB/T 13825-1992 Metallic coatings layer of hot dip galvanized ferrous materials Weighing mass per unit area method (ISO 1460.1992, IDT) Posted 2008-06-19 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 1460.1992 "Metallic coatings on ferrous materials - hot zinc coating mass per unit area weighing method" (In English). This standard is based on ISO 1460.1992 draft translation, this corresponds to standard ISO 1460.1992, made the following editorial changes. --- According to the existing national standard diet overlay series, plus the name of the former standard "metallic coatings"; --- Canceled international standards foreword, preface increased our standards; --- Use the "standard" instead of "this International Standard." This standard replaces GB/T 13825-1992 "quality metal cover layer of hot dip galvanized coatings on ferrous materials - Determination of weighing method." This standard compared with GB/T 13825-1992, the main changes are as follows. --- According to the ISO 1460 instructions revised measurement procedure described; --- This standard is adopted ISO 1460.1992 Measurement Symbols used; --- According to ISO 1460.1992 provisions of Chapter 6 used internationally accepted unit mass formula; --- According to ISO 1460.1992 regulations, amended Chapter 7 of the test report and added footnote 1); --- According to ISO 1460.1992 regulations, complementing the repetition rate of 6.2 requirements. The standard proposed by China Machinery Industry Federation. This standard layer Standardization Technical Committee (SAC/TC57) administered by the National Metal and non-metal cover. This standard was drafted. Beijing Yongtai and metal anti-corrosion Technology Co., Ltd., Ma On Shan Ding Tai Rare Earth New Materials Co., Ltd., Wuhan Materials Protection Institute. The main drafters of this standard. Ji Jing, Zhang Hongwei, Shi Zhimin, Liu Ji Lu, JIA Jian new. This standard replaces the standards previously issued as follows. --- GB/T 13825-1992. GB/T 13825-2008/ISO 1460.1992 Metallic coatings layer of hot dip galvanized ferrous materials Weighing mass per unit area method

1 Scope

This standard specifies a method for determining the quality of the hot dip galvanized coatings on ferrous materials per unit area. This standard requires accurate calculation of the surface area of \u200b\u200bthe sample. Therefore, this standard applies to the sample surface area and easily determinable. If the specimen is heavy Can not be in accordance with this standard requires the implementation of Chapter 5, the mass of hot-dip galvanizing layer should use other methods. Principle 2 A sample of known surface area immersed in corrosion resistance in acidic solution, the quality of the coating by weighing before and after the dissolution of the sample, determine the quality of the sample Loss, calculated according to the mass loss of the sample on the sample unit area of \u200b\u200bhot-dip galvanizing layer quality.

3 stripping solution

3.5g of hexamethylenetetramine dissolved in 500mL of concentrated hydrochloric acid (ρ = 1.19g/mL) and diluted with distilled water to the solution 1000mL.

4 sampling

Sampling methods should negotiate supply and demand sides.

5 measuring program

When necessary, the sample should be used which does not attack galvanized layer of organic solvent degreasing, and then dried. Before stripping, weighing samples, to predict accurately precision coating quality range of 1%. Stripping solution in an amount of sample surface per square centimeter less than 10mL. Specimens shall be completely immersed in retreat at room temperature plating solution, plating Remove the layer is completely dissolved. That is the end of the coating process to dissolve gently unchanged when hydrogen evolution. Remove the sample is placed in flowing water rinse Wash any loose material, if necessary, use a soft brush attachment to the surface. Then immersed in absolute ethanol, and dried quickly removed, weighed and then to the front Said coating quality measurement accuracy. After weighing, the exposed surface area to be measured A, measurement accuracy accurate to 1% range. Calculate the coating quality and thickness of 6 6.1 formula Mass per unit area ρA hot dip galvanizing unit in g/m 2 represents, according to equation (1). ρA = M1 2 m1 1- A × 10 6 (1) Where. M1 --- sample quality retreat before plating units of grams (g); 2 --- sample mass m1 retreat after plating, in grams (g); A --- exposed area of \u200b\u200bthe sample, in units of square millimeters (mm2). Note. The unit steel galvanized layer unit in the area of \u200b\u200bquality ρA g/m 2 represents, should be calculated using the following formula. ρA = 7.84 × 103 4 × D × M1 2 m1 1- M1 2 GB/T 13825-2008/ISO 1460.1992

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13825-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13825-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13825-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13825-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13825-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13825-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.