HOME Cart(0) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

GB/T 13584-2011 English PDF

US$739.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13584-2011: Measuring methods for parameters of infrared detectors
Status: Valid

GB/T 13584: Evolution and historical versions

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
GB/T 13584-2011	English	739	Add to Cart	6 days [Need to translate]	Measuring methods for parameters of infrared detectors	Valid	GB/T 13584-2011
GB/T 13584-1992	English	999	Add to Cart	6 days [Need to translate]	Measuring methods for parameters of infrared detectors	Obsolete	GB/T 13584-1992

PDF similar to GB/T 13584-2011

Standard similar to GB/T 13584-2011

GB/T 7247.1 SAMR 76 GB/T 18490.1 GB/T 17444

Basic data

Standard ID	GB/T 13584-2011 (GB/T13584-2011)
Description (Translated English)	Measuring methods for parameters of infrared detectors
Sector / Industry	National Standard (Recommended)
Classification of Chinese Standard	L52
Classification of International Standard	31.260
Word Count Estimation	32,352
Date of Issue	2011-12-30
Date of Implementation	2012-07-01
Older Standard (superseded by this standard)	GB/T 13584-1992
Regulation (derived from)	National Standard Approval Announcement 2011 No.23
Issuing agency(ies)	General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary	This standard specifies the infrared detector (hereinafter referred to as the detector) test method parameters and testing equipment and instrumentation requirements. This standard applies to all types of unit testing infrared detector parameters, but also for multi- parameter corresponding infrared detector test.

GB/T 13584-2011: Measuring methods for parameters of infrared detectors

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Measuring methods for paramaters of infrared detectors ICS 31.260 L52 National Standards of People's Republic of China Replacing GB/T 13584-1992 Infrared detectors Parameter Test Method Issued on. 2011-12-30 2012-07-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 symbols and units 3 5 General 4 6 Test Method 5 Appendix A (normative) blackbody spectral energy factor F 28

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 13584-1992 "infrared detectors parameter test method." The major changes compared with the standard GB/T 13584-1992 "infrared detectors Parameter Test Method" as follows. --- Increase the use of FTIR spectral response test method (see 6.3.3); --- Modify some parameters of the testing methods, such as. blackbody responsivity, noise, spectral response, in response to cell area and the like. The standard proposed by the Ministry of Information Industry and the People's Republic of China. The standard by the China Institute of Science and Technology Corporation eleventh. This standard was drafted. 11th Institute of China Science and Technology Corporation. The main drafters of this standard. Zhao Jianzhong, Liu Jianwei, Lijin Wu, Zhang Jianwei, Luo Hong, Shen Xiaoping. This standard replaces the previous version of the release of case. --- GB/T 13584-1992. Infrared detectors Parameter Test Method

1 Scope

This standard specifies the infrared detector (hereinafter referred to as probe) parametric test method and testing equipment and instruments. This standard applies to all types of unit infrared detector test parameters, but also for infrared detectors corresponding parameters multivariate testing.

2 Normative references

No provision of this chapter.

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Multiple infrared detector multi-elementinfrareddetector Sensitive to infrared radiation, the number of not less than 2 yuan yuan and has no detector readout circuit. 3.2 Blackbody responsivity blackbodyresponsivity The electrical detector output rms value of the fundamental frequency of the voltage (open circuit) or the rms value of the fundamental frequency current (short-circuit) the power of the incident radiation The fundamental component ratio of the rms value. Represented by Rbb. 3.3 Detector noise noise In the infinite load, after deducting noise preamplifier, the noise detector at both ends of the probe. Represented by Vn. 3.4 Detector spectral response spectralresponse As a function of the relative response of the detector and the wavelength of the incident radiation, represented by Rλ. 3.5 Detection rate detectivity Response rate divided by the rms noise, converted to the amplifier unit bandwidth, and press the square root of the area relationship converted to the detector unit area Value. Blackbody radiation measured by the detection rate is called blackbody detectivity, D * bb to represent. Monochromatic radiation measured by the rate called optical probe Spectrum detection rate, denoted as D. 3.6 Response Rate unevenness responsivitynon-uniformity Multiple detector for each effective pixel response rate difference between the yuan. With each pixel response rate and average response rate and the difference between the rms level Average response rate ratio to characterize. Represented by UR. 3.7 Effective pixel rate operablepixelfactor For multivariate detector, when the pixel response rate falls below a certain predetermined value and the noise is greater than a predetermined value and the number of pixels total pixel detector The ratio of the number. He expressed Nef.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 13584-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 13584-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 13584-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 13584-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 13584-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13584-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.