|
US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 13016-2018: Principles and requirements for constructing standard system
Status: Valid GB/T 13016: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 13016-2018 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Principles and requirements for constructing standard system
| Valid |
GB/T 13016-2018
|
| GB/T 13016-2009 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
Principles and requirements for preparing diagrams of standard system
| Obsolete |
GB/T 13016-2009
|
| GB/T 13016-1991 | English | 239 |
Add to Cart
|
2 days [Need to translate]
|
Principles and requirements for preparing diagrams of standard system
| Obsolete |
GB/T 13016-1991
|
PDF similar to GB/T 13016-2018
Basic data | Standard ID | GB/T 13016-2018 (GB/T13016-2018) | | Description (Translated English) | Principles and requirements for constructing standard system | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | A00 | | Classification of International Standard | 01.120 | | Word Count Estimation | 14,167 | | Date of Issue | 2018-02-06 | | Date of Implementation | 2018-09-01 | | Issuing agency(ies) | State Administration for Market Regulation, China National Standardization Administration | GB/T 13016-2018: Principles and requirements for constructing standard system---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Principles and requirements for constructing standard system
ICS 01.120
A00
National Standards of People's Republic of China
Replacing GB/T 13016-2009
Standard system construction principles and requirements
2018-02-06 released
2018-09-01 implementation
General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
China National Standardization Administration released
Directory
Foreword Ⅲ
Introduction IV
1 Scope 1
2 Terms and definitions 1
3 The basic principles of establishing a standard system 2
3.1 clear objectives 2
3.2 complete sets of 2
3.3 Appropriate level 2
3.4 clearly divided 2
4 general method of building a standard system 2
4.1 to determine the standardization goal 2
4.2 Research 3
4.3 Analysis and finishing 3
4.4 Preparation of standard system Table 3
4.5 Dynamic Maintenance Update 3
5 standard system table content requirements 3
5.1 Standard Architecture Figure 3
5.2 standard schedule 5
5.3 Standard Statistical Table 5
5.4 standard system table preparation instructions 6
Appendix A (Informative) Reference Sequence Structure Figure 7
A.1 System Life Cycle Sequence 7
A.2 Enterprise Value Chain Sequence 7
A.3 Industrial Production Sequence 7
A.4 Information Service Sequence 8
A.5 Project Management Sequence 8
Reference 9
Figure 1 standard system level and level relationship 4
Figure 2 multi-industry product standard system hierarchy 4
Figure A.1 Sequence Structure Figure 7
Figure A.2 Enterprise Value Chain Sequence 7
Figure A.3 Industrial Product Sequence Structure 8
Figure A.4 Information service sequence structure
Figure A.5 Project Management Phase Sequence Structure
Table 1 × × (level or serial number) standard schedule 5
Table 2 Standard Statistical Table 6
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces GB/T 13016-2009 "principles and requirements of the preparation of the standard system table", compared with GB/T 13016-2009 main change
As follows.
--- Name changed to "standard system construction principles and requirements";
--- Modify the "scope";
--- Removed the "normative references" (see.2009 edition Chapter 2);
--- In Chapter 2, "System" was amended by deleting "Terminology Standard", "Process Standard", "Service Standard", "Interface Standard", "Specification"
"Regulations", adding "environment", "border", "standard system model" and other terms (see.2009 edition Chapter 3);
--- Increasing the "general method of building a standard system" (see Chapter 4);
--- Increased several typical reference sequence structure diagram. Enterprise value chain sequence structure, industrial product sequence structure, information service sequence
Structure, sequence structure of the project management sequence structure (see Appendix A);
--- Delete Chapter 6, a comprehensive standard system table (see.2009 edition Chapter 6);
--- Delete the original Appendix A and Appendix B (see.2009 edition Appendix A, Appendix B).
This standard proposed by the China National Institute of Standardization and centralized.
This standard was drafted. China National Institute of Standardization.
The main drafters of this standard. Yue peak, Du Junpeng, Zhu Hong, Yang Qinghai, Sun Zhao Yang, Zhang Yun.
This standard replaces the standards previously issued as follows.
--- GB/T 13016-1991, GB/T 13016-2009.
Introduction
Constructing a standard system is a way to use the system theory to guide the standardization work. Building a standard system is mainly reflected in the preparation of standard system
Structure diagram and standard schedule, providing standard statistical tables, writing standard system preparation instructions, is to carry out the standard system of construction and preconditions
It is also the basis for compiling the standard system and revising the plan and plan. The standard system sheet is within a certain range of existing, due and expected standard
The prospective blueprint is a standard system model.
Standard system construction principles and requirements
1 Scope
This standard specifies the basic principles of building a standard system, the general method and standard system table content requirements.
This standard applies to all types of standard system planning, design and evaluation.
2 Terms and definitions
The following terms and definitions apply to this document.
2.1
System
system
An organic whole with a specific function that is a combination of several components that interact and interdependencies.
Note 1. The system can refer to the entire entity, the system's components may also be a system, this component can be called a subsystem.
Note 2. The system is composed of elements.
2.2
Environment
There are various factors that exist outside the system and have an impact on the system.
2.3
Border
Difference between the elements of the system and the external environment boundaries.
2.4
Standard system standardsystem
Within a certain range of standards according to their internal relations formed by the scientific organic whole.
2.5
The standard system model modelstandardsystem
A model for expressing, describing the objectives, boundaries, ranges, environments, structural relationships of a standard system and reflecting a standardized development plan.
Note. The standard system model is a method or tool for planning, implementing, inspecting and improving the standard system.
2.6
Standard system diagram diagramofstandardsystem
A standard system model that typically includes standard architecture diagrams, standard schedules, and can contain standard statistical tables and compilation instructions.
2.7
Industry industry
Industry (or industry) refers to a collection of all units that perform the same economic activities.
[GB/T 4754-2011, Definition 2.1]
2.8
Professional sub-industry
A collection of all units that are engaged in the same economic activity in one industry (or industry).
Note. GB/T 4754 refers to the "middle class, subclass." Taking into account customary usage, still said professional.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 13016-2018_English be delivered?Answer: Upon your order, we will start to translate GB/T 13016-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 13016-2018_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 13016-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB/T 13016-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 13016-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|