HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 12564-2008 English PDF

US$1099.00 · In stock
Delivery: <= 7 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12564-2008: Generic specification for photomultiplier tubes
Status: Valid

GB/T 12564: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 12564-2008English1099 Add to Cart 7 days [Need to translate] Generic specification for photomultiplier tubes Valid GB/T 12564-2008
GB/T 12564-1990English399 Add to Cart 3 days [Need to translate] Generic specification for photomultiplier tubes Obsolete GB/T 12564-1990

PDF similar to GB/T 12564-2008


Standard similar to GB/T 12564-2008

GB/T 13286   NB/T 20318   GB/T 24247   GB/T 45608   GB/T 43189   GB/T 40291   

Basic data

Standard ID GB/T 12564-2008 (GB/T12564-2008)
Description (Translated English) Generic specification for photomultiplier tubes
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard F88
Classification of International Standard 27.120
Word Count Estimation 50,546
Date of Issue 2008-07-02
Date of Implementation 2009-04-01
Older Standard (superseded by this standard) GB/T 12564-1990; GB/T 13708-1992; GB/T 7270-1987
Quoted Standard GB/T 191; GB/T 787; GB/T 2423.28; GB/T 2423.29; GB/T 3189; GB/T 7274-1987; GB/T 10263-2006
Regulation (derived from) Announcement of Newly Approved National Standards No. 11 of 2008 (No. 124 overall)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the photomultiplier tube related terms, provides optical parameters of the test, inspection and testing of other features as well as signs. This standard applies to having a discrete dynode photomultiplier product testing and inspection.

GB/T 12564-2008: Generic specification for photomultiplier tubes

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Generic specification for photomultiplier tubes ICS 27.120 F88 National Standards of People's Republic of China Replacing GB/T 12564-1990, GB/T 7270-1987, GB/T 13708-1992 General specification for photomultiplier tube Posted 2008-07-02 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 and radiation source 7 5 optical parameters measured 9 Test methods for other properties 6 37 7 logo 38 Appendix A (informative) photomultiplier tubes Blank Detail Specification for authentication 40 References 45 1 black-box testing examples of photoelectric photomultiplier 10 Figure 2 cathode sensitivity of the test system 12 FIG. 3 a block diagram of a cathode spectral sensitivity test 13 Figure 4 anode sensitivity of the test system 15 5 Dark Current Test Schematic 18 6 optical pulse input signal pulse amplitude test block diagram 19 7 is a block diagram of ionizing radiation test input signal pulse amplitude of 19 8 photomultiplier tube inherent amplitude resolution test block diagram 20 Figure 9 a block diagram of a single-electron amplitude resolution test (constant light source method) 21 10 single-electron amplitude resolution test block diagram (pulsed light source method) 21 11 having a stable high secondary emission coefficient showing a first dynode (e.g. of GaP) photomultipliers typical multi-electron amplitude distribution FIG. 12 a block diagram of dark current noise test 23 13 with a block diagram of a constant source of noise test 23 14 a schematic view of a single electron distribution curve 24 15 single-electron integral graphical representation 24 FIG. 16 is a block diagram of a modulation noise source test 25 17 a block diagram of the rise time of the test 25 18 transit time test block diagram 27 Figure 19 illustrates the parameters related to the transit time of 28 20 single-tube test a block diagram of the transit time dispersion 29 21 twin transit time dispersion test block diagram 29 22 single-electron time profile 30 23 maximum linear current test block diagram (polarizing method) 31 Diagram 24 pulse output current relative luminous flux curve 31 25 maximum linear current test block diagram (double pulse method) 31 26 maximum linear current test block diagram (XY oscilloscope) 32 FIG. 27 uniformity test block diagram 33 28 Change photoelectric photomultiplier output current curve 36 Table 1 environmental test conditions and reference standard test conditions 9 Table 2 photomultiplier tubes applied torque moment 37 Table A. Blank detail specification format 1 40

Foreword

This standard replaces GB/T 12564-1990 "General specification for photomultiplier tubes", GB/T 7270-1987 "Test Method for photomultiplier tubes" and GB/T 13708-1992 "photomultiplier tube blank detail specification." This standard is GB/T 12564-1990, GB/T 7270-1987 and GB/T 13708-1992 consolidation amendments. The standards in GB/T 7270-1987 the basic content, and GB/T 13708-1992 After modifying the present standard of informative appendices. The main difference compared with the standard GB/T 12564-1990 as follows. --- Increase in Chapter 2, "Normative references" a reference to the appropriate national standards; --- "Anode light sensitivity," added "measure anode light sensitivity in two ways," (5.2.3.1); --- "Scintillation detector 137Cs magnitude Resolution" adding "amplitude resolution formula" (5.3.2.1.3); --- With GB/T 10263-2006 "environmental test conditions and reference standard test conditions" to replace the original standard test conditions and the corresponding inner Capacity (5.1.1); --- The environmental test (heat, cold, vibration and transport packaging test, etc.) all by GB/T 10263-2006 "nuclear radiation detector Environmental conditions and testing procedures is "the corresponding provisions of the test (6.4). Appendix A of this standard is the data appendix. The standard proposed by China National Nuclear Corporation. This standard by the National Standardization Technical Committee on nuclear instrumentation. This standard was drafted. nuclear (Beijing) Nuclear Instrument Factory, Nanjing Huadong Electronics Group. The main drafters of this standard. Li Lu Hua, Zhou Huanhua, then Tian Tian, \u200b\u200bSecretary dawn, Zhu Zhou Ji, Wu Qihua. This standard replaces the previous standard release is. --- GB/T 7270-1987; --- GB/T 12564-1990; --- GB/T 13708-1992. General specification for photomultiplier tube

1 Scope

This standard gives a photomultiplier tube related terms, provides for testing of optical parameters, other features of the inspection and test, and signs. This standard is applicable to a discrete dynode photomultiplier product testing and inspection.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 191 Packaging - Pictorial signs GB/T 787 electronic tube group size GB/T 2423.28 electric and electronic products environmental testing methods - Test T. Soldering Test Method GB/T 2423.29 Environmental testing for electric and electronic products Part 2. Test methods - Test U. Robustness of terminations and integral security Loading intensity GB/T 3189 electronic tubes attached to the cap size GB/T 7274-1987 Test Method tube electrode capacitance GB/T 10263-2006 nuclear radiation detectors Environmental conditions and testing procedures

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 the amount of radiation and the amount of light 3.1.1 Form of radiation emitted, transmitted or received energy. 3.1.2 Radiation [shoot] power radiationpower Form of radiation emitted, transmitted or received power. 3.1.3 At a solid angle element in a given direction, leaving the point source of radiation (radiation or bin) radiated power divided by the solid angle element quotient. 3.1.4 Exposure to radiation flux bin at a point on the surface of the surface element divided by the area of \u200b\u200bthe quotient. 3.1.5 Radiation can cause visual response of the human eye, in a broad sense also includes ultraviolet and infrared radiation.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12564-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12564-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 7 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12564-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12564-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12564-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12564-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.