HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 12182-2018 English PDF

US$679.00 · In stock
Delivery: <= 6 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12182-2018: General specification for secondary surveillance radar of air traffic control
Status: Valid

GB/T 12182: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 12182-2018English679 Add to Cart 6 days [Need to translate] General specification for secondary surveillance radar of air traffic control Valid GB/T 12182-2018
GB/T 12182-1990English399 Add to Cart 3 days [Need to translate] General specification of secondary surveillance radar for air traffic control Obsolete GB/T 12182-1990

PDF similar to GB/T 12182-2018


Standard similar to GB/T 12182-2018

GB/T 23420   GB/T 12183   

Basic data

Standard ID GB/T 12182-2018 (GB/T12182-2018)
Description (Translated English) General specification for secondary surveillance radar of air traffic control
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard V54
Classification of International Standard 03.220
Word Count Estimation 34,357
Date of Issue 2018-09-17
Date of Implementation 2019-01-01
Older Standard (superseded by this standard) GB/T 12182-1990
Issuing agency(ies) State Administration for Market Regulation, China National Standardization Administration

GB/T 12182-2018: General specification for secondary surveillance radar of air traffic control

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification for secondary surveillance radar of air traffic control ICS 03.220 V54 National Standards of People's Republic of China Replace GB/T 12182-1990 General Specification for Air Traffic Control Secondary Surveillance Radar Trafficcontrol Published on.2018-09-17 2019-01-01 implementation State market supervision and administration China National Standardization Administration issued

Content

Foreword V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Requirements 2 4.1 Composition 2 4.2 Performance 2 4.2.1 Working distance 2 4.2.2 Accuracy 3 4.2.3 Resolution 3 4.2.4 Working mode 3 4.2.5 Target Processing Capability 13 4.2.6 Reliability 13 4.2.7 Maintainability 13 4.2.8 Interface 13 4.2.9 Environmental adaptability 13 4.2.10 Power Adaptability 14 4.2.11 Electromagnetic compatibility 15 4.2.12 Security 15 4.2.13 Continuous working capacity 15 4.2.14 Size and weight 15 4.3 Antenna Subsystem 15 4.3.1 Antenna 15 4.3.2 Antenna turntable 16 4.4 Launch Subsystem 16 4.4.1 Transmission frequency 16 4.4.2 Pulse Peak Power 16 4.4.3 Transmit pulse repetition frequency 16 4.4.4 Interrogation pulse characteristics 16 4.5 Receiving Subsystem 16 4.5.1 Receiving frequency 16 4.5.2 Tangent sensitivity 16 4.5.3 3dB bandwidth 16 4.5.4 Decoding sensitivity 16 4.5.5 Image rejection 16 4.5.6 Dynamic Range 17 4.6 Admittance and Track Processor 17 4.7 Monitor and Maintenance Display 17 5 Test Method 17 5.1 Test conditions 17 5.1.1 Test environment 17 5.1.2 Test instruments and meters 17 5.2 Composition 17 5.3 Performance 17 5.3.1 Working distance 17 5.3.2 Accuracy 17 5.3.3 Resolution 18 5.3.4 Working mode 18 5.3.5 Target Processing Capability 18 5.3.6 Reliability 18 5.3.7 Maintainability 18 5.3.8 Interface 19 5.3.9 Environmental adaptability 19 5.3.10 Power Adaptability 19 5.3.11 Electromagnetic Compatibility 19 5.3.12 Security 19 5.3.13 Continuous working capacity 19 5.3.14 Size and weight 19 5.4 Antenna Subsystem 20 5.4.1 Operating frequency range 20 5.4.2 Antenna beam 20 5.4.3 Polarization mode 20 5.4.4 Standing wave ratio 20 5.4.5 Gain 20 5.4.6 Beamwidth, sidelobe and tailgate levels 20 5.4.7 Antenna turntable 20 5.5 Launch Subsystem 20 5.5.1 Test Block Diagram 20 5.5.2 Test Method 21 5.6 Receiving Subsystem 21 5.6.1 Test Block Diagram 21 5.6.2 Test Method 22 5.7 Admittance and Track Processor 22 5.7.1 Test Block Diagram 22 5.7.2 Test Method 23 5.8 Monitor and Maintenance Display 23 5.8.1 Test Block Diagram 23 5.8.2 Test Method 23 6 Quality assessment procedures 23 6.1 Inspection classification 23 6.2 Inspection items 23 6.3 Identification test 25 6.4 Quality consistency test 25 7 Marking, packaging, transport and storage 25 7.1 mark 25 7.1.1 Product Mark 25 7.1.2 Package surface mark 25 7.2 Packing 25 7.3 Transportation 26 7.4 Storage 26

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 12182-1990 "General Technical Conditions for Air Traffic Control Secondary Surveillance Radar". This standard and Compared with GB/T 12182-1990, the main technical changes are as follows. --- Modified the "scope" description (see Chapter 1, Chapter 1 of the.1990 edition); ---Modified "normative references" (see Chapter 2, Chapter 2 of the.1990 edition); --- Added 13 terms, delete the terms "interrogation lobe", "control lobe" and "control pulse" (see Chapter 3,.1990 edition) Chapter 3); --- Removed the "Product Classification" (see Chapter 4 of the.1990 edition); --- Increased the "composition" requirements (see 4.1); --- Revised the "action distance" requirement (see 4.2.1, 5.1.1 of the.1990 edition); --- Removed the "discovery probability" (see version 5.1.2 of the.1990 edition); --- Added "precision" "working mode" and "target processing capability" requirements (see 4.2.2, 4.2.4 and 4.2.5); --- Revised the "resolution" requirement (see 4.2.3,.1990 version 5.1.3); ---Modified the "inquiry mode" (see 4.2.4.1,.1990 version 5.3.6), moving the content to "working mode" (see 4.2.4); --- Added "interactive mode" and "S mode" content (see 4.2.4.1.2, and 4.2.4.1.3); --- Added "Response Signal" and "S-Mode Query and Response Information Fields" requirements (see 4.2.4.2 and 4.2.4.3); --- Revised the "reliability and maintainability" requirements (see 4.2.6 and 4.2.7,.1990 version of 5.1.4); --- Modified the "interface" requirements (see 4.2.8,.1990 version of 5.1.5); ---Modified the requirements of "high temperature", "low temperature", "constant humid heat" and "low air pressure" (see 4.2.9.1~4.2.9.4, 5.1.6 of.1990 edition); --- Modified the "wind resistance" and "rain" requirements (see 4.2.9.5 and 4.2.9.6,.1990 editions 5.2.9 and 5.2.10), moving the content to “Environmental adaptability” (see 4.2.9); --- Modified the "power adaptability" requirements (see 4.2.10,.1990 version of 5.1.7); ---Modified the "electromagnetic compatibility" requirements (see 4.1.8,.1990 version of 5.1.8); --- Revised the "safety" requirements (see 4.1.2,.1990 version of 5.1.9); --- Revised the "Continuous Work Capability" requirement (see 4.2.13, version 5.1.10 of the.1990 edition); --- Increased the "size, weight" requirements (see 4.2.14); --- Modified the "antenna beam" requirement (see 4.3.1.2, version 5.2.2 of the.1990 version); --- Revised the "side and tail flap level" requirements (see 4.3.1.7,.1990 version of 5.2.7); --- Added "antenna turntable" requirements (see 4.3.2); --- Modified the "antenna speed" requirement (see 4.3.2,.1990 version of 5.2.8); --- Revised the "transmitting frequency" requirement (see 4.4.1,.1990 editions 5.3.1 and 5.3.2); --- Modified the "Pulse Peak Power" requirement (see 4.4.2, version 5.3.3 of the.1990 version); --- Modified the "transmitting pulse repetition frequency" requirement (see 4.4.3,.1990 version of 5.3.4); --- Modified the "interrogation pulse characteristics" requirement (see 4.4.4,.1990 editions 5.3.7~5.3.11); --- Modified the "3dB bandwidth" requirement (see 4.5.3,.1990 version 5.4.4); --- Added "decoding sensitivity" and "image frequency suppression" (see 4.5.4 and 4.5.5); --- Removed the "external sync pulse repetition frequency" (1990 version 5.3.5); --- Revised the "Dynamic Range" requirement (see 4.5.6, 5.4.5 of the.1990 edition); --- Removed the "local oscillator frequency" (see 5.4.1 of the.1990 edition); --- Added "Admitter and Track Processor" "Monitor and Maintenance Display" requirements (see 4.6 and 4.7); --- Added "test conditions" (see 5.1); --- Added "composition" method (see 5.2); --- Added "precision" "working mode" and "target processing capability" methods (see 5.3.2, 5.3.4 and 5.3.5); --- Modified the "resolution" method (see 5.3.3, version 6.1.2 of the.1990 edition); --- Revised the "reliability" and "maintenance" methods (see 5.3.6, 5.3.7, 6.1.3 of the.1990 edition); --- Modified the "interface" method (see 5.3.8, version 6.1.4 of the.1990 version); ---Modified the "environmental adaptability" method (see 5.3.9, 6.1.5 of the.1990 edition); --- Modified the "wind-resistant" and "rain-proof" methods (see 5.3.9.5 and 5.3.9.6,.1990 editions 6.2.8 and 6.2.9); --- Modified the "power adaptability" method (see 5.3.10, version 6.1.6 of the.1990 version); ---Modified the "electromagnetic compatibility" method (see 5.3.1,.1990 version 6.1.7); --- Modified the "safety" method (see 5.1.8,.1990 version of 6.1.8); --- Modified the "continuous work ability" method (see 5.3.1,.1990 version of 6.1.9); --- Modified the "working frequency range" method (see 5.4.1,.1990 version of 6.2.1); --- Modified the "polarization method" method (see 5.4.3, version 6.2.3 of the.1990 version); --- Modified the "stationary wave ratio" method (see 5.4.4, version 6.2.4 of the.1990 edition); --- Modified the "gain" method (see 5.4.5, version 6.2.5 of the.1990 version); --- Modified the "beamwidth, sidelobe and taillet level" methods (see 5.4.6,.1990 version 6.2.6); --- Added "antenna turntable" method (see 5.4.7); --- Added "automatic test" method of "antenna speed" (see 5.4.7.1); ---Modified the "test block diagram" of the "transmitting subsystem" (see 5.5.1, 6.3.1 of the.1990 edition); --- Modified the "transmitting frequency" method (see 5.5.2.1,.1990 editions 6.3.2.1 and 6.3.2.2); --- Modified the "Pulse Peak Power" method (see 5.5.2.2, 6.3.2.3 of the.1990 edition); --- Modified the "transmit pulse repetition frequency" method (see 5.5.2.3,.1990 edition of 6.3.2.4); --- Removed the "external sync pulse repetition frequency" method (1990 version 6.3.2.5); --- Modified the "interrogation pulse characteristics" method (see 5.5.2.4, 6.3.2.6 and 6.3.2.7 of the.1990 edition); ---Modified the "test block diagram" in the "receiving subsystem" (see 5.6.1, 6.4.1 of the.1990 edition); --- Removed the "local oscillator frequency" method (see 6.4.2.1 of the.1990 edition); --- Added "receiving frequency", "decoding sensitivity" and "image frequency suppression" methods (see 5.6.2.1, 5.6.2.5 and 5.6.2.6); --- Modified the "working frequency range" method (see 5.6.2.2, 6.4.2.2 of the.1990 version); --- Modified the "tangential sensitivity" method (see 5.6.2.3, 6.4.2.3 of the.1990 edition); --- Modified the "3dB bandwidth" method (see 5.6.2.4, 6.4.2.4 of the.1990 version); ---Modified the "dynamic range" method (see 5.6.2.7, 6.4.2.5 of the.1990 version); --- Added "Admission and Track Processor" method (see 5.7); --- Added "Monitor and Maintenance Display" method (see 5.8); --- Revised the "inspection rules" (see Chapter 6, Chapter 7 of the.1990 edition); ---Modified "Inspection Classification" and "Inspection Project" (see 6.1 and 6.2,.1990 editions 7.1 and 7.2); --- Deleted Table 4 (see 7.2 of the.1990 edition); --- Added Table 14 (see 6.2); --- Removed the "type test" (see 7.3 of the.1990 version); --- Added "identification test" (see 6.3); --- Removed the "handover inspection" "routine inspection" and "processing after the inspection prototype" (see.1990 editions 7.4, 7.5 and 7.6); --- Added "Quality Consistency Test" (see 6.4); --- Modified the "Marking, Packaging, Transportation and Storage" method (see Chapter 7, Chapter 8 of the.1990 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard was proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This standard is under the jurisdiction of the Ministry of Industry and Information Technology (Electronics) (339-1). This standard was drafted. Sichuan Jiuzhou Electric Group Co., Ltd. The main drafters of this standard. Ou Gang, Tan Yuanquan, Li Haijun, Miao Dong, Li Zhengyong, Zhang Qingjun, He Siling, Mo Bin. The previous versions of the standards replaced by this standard are. ---GB/T 12182-1990. General Specification for Air Traffic Control Secondary Surveillance Radar

1 Scope

This standard specifies the technical requirements, test methods and quality evaluation of the air traffic control secondary surveillance radar (hereinafter referred to as the secondary surveillance radar). Set procedures, marking, packaging, transportation and storage requirements. This standard is applicable to the design, production and acceptance of secondary surveillance radars in conventional or single-pulse systems. It is the preparation of various types of secondary surveillance radars. The basic basis of the product standard.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3784 Electrotechnical terminology radar GJB74A-1998 General Specification for Military Ground Radar GJB150.2A-2009 Environmental testing methods for military equipment - Part 2. Low-pressure (height) test GJB150.3A-2009 Environmental testing methods for military equipment - Part 3. High temperature test GJB150.4A-2009 Environmental testing methods for military equipment - Part 4. Low temperature test GJB150.9A-2009 Environmental testing methods for military equipment - Part 9. Damp heat test GJB151A-1997 Electromagnetic emission and sensitivity requirements for military equipment and sub-systems GJB152A-1997 Electromagnetic emission and sensitivity measurement for military equipment and sub-systems GJB899A-2009 Reliability Identification and Acceptance Test GJB2072 maintainability test and evaluation GJB3262-1998 Radar antenna sub-system performance test method gain GJB3310-1998 Radar antenna sub-system performance test method direction diagram International Civil Aviation Organization Annex 10 "Aeronautical Telecommunications" Volume IV Surveillance Radar and Collision Avoidance System (ICAOAnnex10VolumeIV SurveilanceRadarandColisionAvoidanceSystems)

3 Terms and definitions

The following terms and definitions defined in GB/T 3784 apply to this document. 3.1 Single pulse secondary surveillance radar mono-pulsesecondarysurveilanceradar; MSSR A secondary surveillance radar that performs spatial coordinate measurement on an aircraft equipped with an answering machine using a single-pulse angle measurement technique. 3.2 Distance range resolution In the same orientation, the ability of the radar to distinguish the minimum distance between adjacent aircraft. 3.3 Distance accuracy rangeaccuracy Mean square error of radar ranging estimation.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12182-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12182-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 4 ~ 6 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12182-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12182-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 12182-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 12182-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.