|
US$329.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12060.9-2011: Sound system equipment -- Part 9: Methods of measurement for artificial reverberation, time delay and frequency shift equipment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB/T 12060.9-2011 | English | 329 |
Add to Cart
|
3 days [Need to translate]
|
Sound system equipment -- Part 9: Methods of measurement for artificial reverberation, time delay and frequency shift equipment
| Valid |
GB/T 12060.9-2011
|
PDF similar to GB/T 12060.9-2011
Basic data | Standard ID | GB/T 12060.9-2011 (GB/T12060.9-2011) | | Description (Translated English) | Sound system equipment -- Part 9: Methods of measurement for artificial reverberation, time delay and frequency shift equipment | | Sector / Industry | National Standard (Recommended) | | Classification of Chinese Standard | M72 | | Classification of International Standard | 33.160.99 | | Word Count Estimation | 14,116 | | Date of Issue | 2011-12-30 | | Date of Implementation | 2012-05-01 | | Older Standard (superseded by this standard) | GB/T 6448-1986; GB/T 6449-1986 | | Quoted Standard | GB/T 3240; GB/T 3241-2010 | | Adopted Standard | IEC 60268-9-1977, NEQ | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 23 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This standard specifies the artificial reverb, delay and frequency shift device-specific characteristics and methods of measurement interpretation. This section applies to recording, broadcast and sound reinforcement systems for the original sound signal is generated reverb, delay and frequency offset of the device. The main contents include these devices and special characteristics of the general description of the measurement conditions and methods of measurement. Other items not specified by the producer and the consumer negotiated settlement, can not exclude other methods give equivalent results. | GB/T 12060.9-2011: Sound system equipment -- Part 9: Methods of measurement for artificial reverberation, time delay and frequency shift equipment
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Sound system equipment Part 9. Methods of measurement for artificial reverberation, time delay and frequency shift equipment
ICS 33.160.99
M72
National Standards of People's Republic of China
Replacing GB/T 6448-1986, GB/T 6449-1986
Sound system equipment - Part 9. Artificial reverberation,
Time delay and frequency shift measurement device
Soundsystemequipment-Part 9. Methodsofmeasurementforartificial
reverberation, timedelayandfrequencyshiftequipment
(IEC 60268-9. 1977, Soundsystemequipment-Part 9. Artificial
reverberation, timedelayandfrequencyshiftequipment, NEQ)
Issued on. 2011-12-30
2012-05-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Foreword
GB/T 12060 "Sound system equipment" is divided into the following sections.
--- Part 1. General;
--- Part 2. General method of calculation and interpretation of the term;
--- Part 3. audio amplifier measurement methods;
--- Part 4. Methods of measurement microphones;
--- Part 5. Methods for measuring performance main speaker;
--- Part 6. Auxiliary passive components;
--- Part 7. Headphones measurement methods;
--- Part 8. AGC device;
--- Part 9. Artificial reverberation, time delay and frequency shift measurement means;
--- Part 10. Peak program level meters;
--- Part 11. Sound system equipment connectors for the interconnection of the application;
--- Part 12. Radio and with similar sound system connected applications;
--- Part 13. speaker listening tests;
--- Part 14. Circular and oval speaker shape and installation dimensions;
--- Part 16. the speech transmission index (STI) objective assessment of the level of speech intelligibility;
--- Part 17. Standard volume tables;
--- Part 18. Peak program level meters - Digital audio peak level meter.
This section GB/T Part of 912,060.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This part of IEC 60268-9. 1977 "Sound system equipment - Part 9. Artificial reverberation, time delay and frequency shift means" consistency Cheng
Non-equivalent degree, and this part of IEC 60268-9. compared to 1977, it gives a detailed measurement method, and an increase in testing equipment, measurement conditions.
This Part replaces GB/T 6448-1986 "artificial reverberation device measuring method" and GB/T 6449-1986 "time delay and frequency shift means
Set measurement method. "
This part of GB/T 6448-1986 and GB/T 6449-1986 compared to the main changes are as follows.
a) the integration of GB/T 6448-1986 and GB/T 6449-1986 content into GB/T 12060 in this section;
b) increase the foreword;
c) an increase of terms and definitions.
This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China.
This part of the National Audio, video and multimedia systems and equipment Standardization Technical Committee (SAC/TC242) centralized.
This section drafted by. China Electronics Technology Group Corporation Institute, the National Radio and Television Product Quality Supervision and Inspection Center, Guangdong
Provincial Supervision, Inspection and electrical and electronic products, China Electronics Technology Group Corporation fifty Institute.
The main drafters of this section. Xu Yongsheng, Na Wen, Cheng Yang, Zhou Guangsheng, Liu Xun, Zhou A ball, Likai Bing, WANG Xiang, Zheng Chen.
This part of the standard replaces the previous editions are.
--- GB/T 6448-1986, GB/T 6449-1986.
Sound system equipment - Part 9. Artificial reverberation,
Time delay and frequency shift measurement device
1 Scope
GB/T 12060 provisions of this part of the artificial reverberation, time delay and explain the specific features and methods of measurement of the frequency shift means.
This section applies to recording, broadcast and sound reinforcement system for the original sound signal reverb, delay and frequency offset means
Home. The main contents include general and special characteristics of these devices is described, measurement conditions and methods of measurement. Other unspecified items from birth
Production and users of consultation. Does not exclude other methods can give equivalent results.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3240 acoustic measurement commonly used frequency (GB/T 3240-1982, ISO 266. 1975, neq)
GB/T 3241-2010 electro-acoustics octave and fractional octave filters (IEC 61260.1995, MOD)
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Reverberation reverberation
In room acoustics, the reverberation after the sound source stops sounding, acoustic energy in the room is still ongoing acoustic phenomena.
For artificial reverbs, reverb input means cut off electrical signals, the output signal of the device continues to simulate room reverberation
Phenomenon characteristic.
3.2
Reverberation time reverberationtime
If the signal attenuation exponential law, the reverberation time is to stop the input signal, or sound pressure level attenuation output
60dB required time.
3.3
Initial reverberation time and the late reverberation time initialreverberationtimeandultimatereverberationtime
When the signal attenuation index does not comply with the law, the initial reverberation time of the device is based on an output signal as a function of time at the initial value or less
0dB ~ -15dB range represents the average slope of the reverberation time. Late reverberation time is -15dB ~ -40dB range of the mean slope
Representative reverberation time.
3.4
Linear attenuation deviation lineardeviationofdecay
The maximum deviation of the actual level of the output signal attenuating means to its mean line between the slope of the line.
3.5
Initial delay time initialdelaytime
The first time interval reverberation echo signal output of the device (break point) and the input signal (corresponding discontinuity) between (ms).
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 12060.9-2011_English be delivered?Answer: Upon your order, we will start to translate GB/T 12060.9-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB/T 12060.9-2011_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 12060.9-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|