HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189760 (18 Oct 2025)

GB/T 12060.4-2012 English PDF

US$774.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 12060.4-2012: Sound system equipment -- Part 4: Methods of measurement for microphones
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 12060.4-2012English774 Add to Cart 3 days [Need to translate] Sound system equipment -- Part 4: Methods of measurement for microphones Valid GB/T 12060.4-2012

PDF similar to GB/T 12060.4-2012


Standard similar to GB/T 12060.4-2012

GB/T 25102.7   GB/T 14471   GB/T 25102.13   GB/T 12060.1   GB/T 12060.7   GB/T 12060.11   

Basic data

Standard ID GB/T 12060.4-2012 (GB/T12060.4-2012)
Description (Translated English) Sound system equipment -- Part 4: Methods of measurement for microphones
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard M72
Classification of International Standard 33.160
Word Count Estimation 39,317
Older Standard (superseded by this standard) GB/T 9401-1988
Quoted Standard GB/T 12060.2-2011; GB/T 12060.3-2011; GB/T 12060.5-2011; GB/T 14197-2012; GB/T 17626.2-2006; GB/T 17626.3-2006; GB/T 20247-2006; SJ/Z 9140.1-1987; IEC 60065-2005; IEC 60268-11-1987; IEC 60268-12-1987; IEC 60574-3-1983; IEC 60914-1988; IEC 61265-1995
Adopted Standard IEC 60268-4-2004, IDT
Regulation (derived from) National Standards Bulletin No. 41 of 2012
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the electrical impedance microphone sound system, sensitivity, directivity pattern, dynamic range and outside influence measurement method. This section applies to all languages ??and music for the sound system microphones. However

GB/T 12060.4-2012: Sound system equipment -- Part 4: Methods of measurement for microphones

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS33.160 M72 National Standards of People's Republic of China GB/T 12060.4-2012/IEC 60268-4.2004 Replacing GB/T 9401-1988 Sound system equipment - Part 4. Methods of measurement microphones Soundsystemequipment-Part 4. Methodsofmeasurementformicrophones (IEC 60268-4.2004, IDT) Issued on. 2013-06-01 2012-12-31 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 General condition 2 4 Special Conditions 3 5 Type Description (acoustic performance) 7 6 output and the controller 7 7 7 reference points and reference axis 8 8 Rated Power Electrical Impedance 8 9 10 Sensitivity 9 11 Response 12 Directivity characteristic 12 13 13 non-linear amplitude 16 14 limit characteristic 17 Balance 15 18 16 due to inherent noise equivalent sound pressure level 18 17 atmospheric conditions 19 18 19 outside influence 19 stray magnetic interference 23 20 Physical Characteristics 23 21 Classification characteristics explain 23 Appendix A (normative) acoustic device 30 Simplified procedures Annex B (informative) "spout sound" measured 31 References 33 Figure 1a balanced output 25 Equilibrium Figure 1b working conditions 26 Measuring device of FIG. 2 winds of 26 Pattern 31 (a) and type (lower) wind generator 272 Electrical and mechanical measuring apparatus Figure 4 "spout sound" effect 28 FIG. 5 and the reference signal characteristic 29 Figure A.1 acoustic device 30 Figure B.1 measurement setup 32 GB/T 12060.4-2012/IEC 60268-4.2004 Figure B.2 sound field sensitivity measuring apparatus 32 Table 1 empty field reverberation time T should exceed the value of 5 Table 2 at the center frequency of the octave band speech power weighting factor 12 Table 3 Characteristics Category 24 GB/T 12060.4-2012/IEC 60268-4.2004

Foreword

GB/T 12060 "Sound system equipment" is divided into several parts. --- Part 1. General; --- Part 2. General method of calculation and interpretation of the term; --- Part 3. audio amplifier measurement methods; --- Part 4. Methods of measurement microphones; --- Part 5. Methods for measuring performance main speaker; --- Part 6. Auxiliary passive components; --- Part 7. Headphones measurement methods; --- Part 8. AGC device; --- Part 9. Artificial reverberation, time delay and frequency shift measurement means; --- Part 10. Peak program level meters; --- Part 11. Sound system equipment connectors for the interconnection of the application; --- Part 12. Radio and with similar sound system connected applications; --- Part 13. speaker listening tests; --- Part 14. Circular and oval speaker, shape and installation dimensions; --- Part 16. the speech transmission index (STI) objective assessment of the level of speech intelligibility; --- Part 17. Standard volume tables; --- Part 18. Peak program level meters - Digital audio peak level meter. This is Part 4 GB/T 12060 in. Rules in this section in accordance with GB/T 1.1-2009 given draft. This section uses the translation method identical with IEC 60268-4.2004 "Sound system equipment - Part 4. microphone." This Part replaces GB/T 9401-1988 "method of measuring microphones." For ease of use, this section made the following editorial changes. a) instead of as a decimal by decimal comma ",". ","; b) Remove the preface to international standards. Compared to major changes in this part of GB/T 9401-1988 as follows. a) Chapter 12, an increase of 12.5 specific features stereo microphone; b) increase the amplitude of nonlinear Chapter 13; c) increasing the balance Chapter 15; d) Chapter 18, an increase of 18.5 instantaneous equivalent sound "spout sound" effect caused by pressure; 18.6 electromagnetic interference caused by the equivalent sound Pressure; 18.7 electrostatic discharge; e) an increase in Appendices A and B; f) Remove the original standard output voltage Chapter 8; g) Remove the original standard differential axial ratio 10.6; h) Remove the original standard in Appendix A; i) of this section reg number and IEC 60268-4.2004 "Sound system equipment - Part 4. microphone" (English Version) consistent. Correspondence between the consistency of the standards of international documents and normative references of the following documents. --- GB/T 8898-2011 audio, video and similar electronic apparatus - Safety requirements (IEC 60065.2005, MOD) GB/T 12060.4-2012/IEC 60268-4.2004 --- GB/T 12060.11-2012 Sound system equipment - Part 11. Sound system equipment connected with the interconnection application (IEC 60268-11. 1987, NEQ) --- GB/T 15212-1994 broadcast and similar sound system with connected applications (eqvIEC 60268-12. 1987) --- GB/T 15381-1994 audio conferencing systems and electrical performance requirements (eqvIEC 60914. 1988) --- GB/T 15644-1994 interconnection of equipment in audiovisual systems connected application (neqIEC 60574-3. 1983) This part is proposed by the Ministry of Industry and Information Technology of the People's Republic of China. This part of the National Audio, video and multimedia systems and equipment Standardization Technical Committee (SAC/TC242) centralized. This part mainly drafted by. Jiangsu Electronic Information Products Quality Supervision and Inspection Institute, Nanjing University Institute of Acoustics, Shenzhen Hao Well Acoustics Company. The main drafters of this section. Zhang Zhiqiang, Shen Yong, Wu Zonghan, Chen Jia sound. This part of the standard replaces the previous editions are. --- GB/T 9401-1988. GB/T 12060.4-2012/IEC 60268-4.2004 Sound system equipment - Part 4. Methods of measurement microphones

1 Scope

This section GB/T 12060 specifies the electrical impedance, sensitivity, directivity pattern, dynamic range and external influences sound system microphones Measurement method. This section applies to all sound system microphones for language and music, but applicable to a multi-channel audio through a microphone for each Channel, such as a stereo microphone or similar purposes. This section also applies to the embedded microphone and digital audio output with analog characteristics microphone. This section applies to a microphone includes all devices, such as transformers, preamp, or other element constituting an integral part of the microphone Member, until the manufacturer's output. This section does not apply to the measurement microphone. Note. Features This section does not fully describe the provisions of the subjective response of the microphone is necessary to do further work to arrive at new definitions and measurement methods to make. Was used to illustrate that at least some subjective description of the performance of the microphone, you can later replace with objective characteristics.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated edition applies to this article Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 12060.2-2011 Sound system equipment - Part 2. General Explanation of terms and calculation methods (IEC 60268-2. 1987, IDT) GB/T 12060.3-2011 Sound system equipment - Part 3. audio amplifier measurement (IEC 60268-3.2000, IDT) GB/T 12060.5-2011 Sound system equipment - Part 5. Methods for measuring performance main speaker (IEC 60268-5.2007 IDT) GB/T 14197-2012 preferred matching values \u200b\u200bfor audio, video and audiovisual systems interconnection (IEC 61938.1996, IDT) GB/T 17626.2-2006 electromagnetic compatibility test and measurement techniques - Electrostatic discharge immunity test (IEC 61000-4-2.2001, IDT) GB/T 17626.3-2006 electromagnetic compatibility test and measurement technology RFEMS test (IEC 61000-4- 3.2002, IDT) GB/T 20247-2006 acoustic reverberation chamber sound absorption measurements (ISO 354.2003, IDT) SJ/Z9140.1-1987 Sound system equipment - Part 1. General (idtIEC 268-1. 1985) IEC 60065.2005 Audio, video and similar electronic apparatus - Safety requirements (Audio, videoandsimilarelectronicappa- ratus-Safetyrequirements) IEC 60268-11. 1987 Sound system equipment connectors for the interconnection of applications (Soundsystemequipment-Part 11. Appli- cationofconnectorsfortheinterconnectionofsoundsystemcomponents) IEC 60268-12. 1987 broadcast and similar sound systems connected applications (Soundsystemequipment-Part 12. Ap- plicationofconnectorsforbroadcastandsimilaruse) IEC 60574-3. 1983 audiovisual system equipment connectors for the interconnection of applications (Audiovisual, videoandtelevisionequip- mentandsystem-Part 3. Connectorsfortheinterconnectionofequipmentinaudiovisualsystems) IEC 60914. 1988 audio conferencing systems and electrical performance requirements (Conferencesystem-electricalandaudiorequire- GB/T 12060.4-2012/IEC 60268-4.2004

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 12060.4-2012_English be delivered?

Answer: Upon your order, we will start to translate GB/T 12060.4-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 12060.4-2012_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 12060.4-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.